In 3D, texture mapping is the process of adding graphics to a polygon object. These graphics can be anything from photographs to original designs. Textures can help age your object, and give them more appeal and realism.
The tribological properties of textured surfaces of brass and aluminum were compared with untextured surfaces of the same specimens. This was done to research the effect of micro-dimples and their geometry parameters in reducing the wear of samples tested under lubricated contact with a ball-on-flat reciprocating tribometer.
DESIGN A TRIBOLOGICAL BEHAVIOUR OF PUMP SHAFT USING SHOT PEENING PROCESSIjorat1
Surface texturing is a means for enhancing tribological properties of mechanical components. Shot peening
control is a cold working method accomplished by pelting the surface of a metal part with round metallic shot thrown at
relatively high velocity. Each shot acts as tiny peening hammer, Causing the surface to yield in plastic deformation &
leaving a small concave depression on the surface of the metal. The material on which the work carried out was pump
shaft. The pump shaft is used as a En-8 Material. The experimental work deals with shot peening of the surface of the
pump shaft material for the study of surface roughness, surface hardness and the tribological properties as compared
with heat treatment process of pump shaft. The shot peening was carried out by altering the peening pressures and the
shot sizes. The changes in pressure and shot size have changes on the surface roughness, surface hardness and
tribological properties of the surface.
Presentazione al World Tribology Congress 2013 AMTESTING
WTC2013 is the fifth World Tribology Congress, which will take place in Torino, Italy, after the sessions in London (1997), Vienna (2001), Washington DC (2005) and Kyoto (2009).
This presentation summarized an innovative work made by AM Testing srl.
Curso ministrado pelo professor Izhak Etsion, do Israel Instituto of Technology (Technion), de 2 a 5 de fevereiro de 2010 no Departamento de Engenharia Mecânica da Poli-USP. Organizado pelo Laboratório de Fenômenos de Superfície.
The tribological properties of textured surfaces of brass and aluminum were compared with untextured surfaces of the same specimens. This was done to research the effect of micro-dimples and their geometry parameters in reducing the wear of samples tested under lubricated contact with a ball-on-flat reciprocating tribometer.
DESIGN A TRIBOLOGICAL BEHAVIOUR OF PUMP SHAFT USING SHOT PEENING PROCESSIjorat1
Surface texturing is a means for enhancing tribological properties of mechanical components. Shot peening
control is a cold working method accomplished by pelting the surface of a metal part with round metallic shot thrown at
relatively high velocity. Each shot acts as tiny peening hammer, Causing the surface to yield in plastic deformation &
leaving a small concave depression on the surface of the metal. The material on which the work carried out was pump
shaft. The pump shaft is used as a En-8 Material. The experimental work deals with shot peening of the surface of the
pump shaft material for the study of surface roughness, surface hardness and the tribological properties as compared
with heat treatment process of pump shaft. The shot peening was carried out by altering the peening pressures and the
shot sizes. The changes in pressure and shot size have changes on the surface roughness, surface hardness and
tribological properties of the surface.
Presentazione al World Tribology Congress 2013 AMTESTING
WTC2013 is the fifth World Tribology Congress, which will take place in Torino, Italy, after the sessions in London (1997), Vienna (2001), Washington DC (2005) and Kyoto (2009).
This presentation summarized an innovative work made by AM Testing srl.
Curso ministrado pelo professor Izhak Etsion, do Israel Instituto of Technology (Technion), de 2 a 5 de fevereiro de 2010 no Departamento de Engenharia Mecânica da Poli-USP. Organizado pelo Laboratório de Fenômenos de Superfície.
This is an application that allows the user to verify the texturing performance in the system. Also enables re-use of code already written for texturing.
Seminar on tribological behaviour of alumina reinfoeced composite material na...Sidharth Adhikari
THIS SEMINAR IS ON TRIBOLOGY BEHAVIOR OF ALUMINA REINFOCED COMPOSITE MATERIAL AND BRAKE DISK MATERIAL
MTECH SECOND SEMESTER SEMINAR ,CENTRE FOR ADVANCE POST-GRADUATE STUDIES,BPUT,ROURKELA
A goal is must You should know that you’re not the first multimedia artist who aspires to do something creative with his career.
Know the audience Keep in mind that it is the audience for whom you are working and they should be appreciative and engaged with the content that you create.
Fundamental understanding of all the essential software You must have a good grasp over the usage of all the default and mandatory software required in the multimedia industry.
Despicable Me 3 is a 2017 American 3D computer-animated comedy film produced by Illumination Entertainment for Universal Pictures. It is the third installment in the Despicable Me film series, and the sequel to Despicable Me 2 (2013). The film is directed by Pierre Coffin and Kyle Balda, co-directed by Eric Guillon, and written by Cinco Paul and Ken Daurio.
In the film, Gru teams up with his long lost twin brother Dru in order to defeat a new enemy named Balthazar Bratt, a 1980s child actor who grows up to become a villain. Steve Carell, Miranda Cosgrove and Dana Gaier reprise their roles of Gru, Margo and Edith from the first two films, and Julie Andrews who returns as Marlena, Gru's mother from Despicable Me (2010). Kristen Wiig and Steve Coogan return from Despicable Me 2 and Trey Parker, Jenny Slate and Nev Scharrel (replacing Elsie Fisher as Agnes) join the cast.
Pacific Rim is a 2013 American science fiction monster film directed by Guillermo Del Toro and starring Charlie Hunnam, Idris Elba, Rinko Kikuchi, Charlie Day, Burn Gorman, Robert Kazinsky, Max Martini and Ron Perlman.
The film is set in the future, when Earth is at war with the Kaiju, colossal monsters which have emerged from an interdimensional portal on the bottom of the Pacific Ocean.
From the very description you can make that the entire movie has been worked up on with the help of visual effects. Del Toro hired Oscar winners John Knoll and Hal T.
Legacy Effects co-owner Shane Mahan, known for creating the armored suits for Iron Man, was tasked with building the suits, helmets and conn-pods. Oscar winner Clay Pinney, known for his work on Independence Day and Star Trek, was also brought on board. Hybride Technologies, a division of Ubisoft, and Rodeo FX also contributed to the visual effects.
Plan 9 from outer space
Plan 9 from Outer Space is a 1959 independently made American black-and-white science fiction-horror film that was only released theatrically in 1959 by distributors Corporations of America. The graphic design work of this film is extensively impressive and received positive acclaim all over the globe.
Fantastic Planet
Fantastic Planet is a 1973 Franco-Czech allegorical cutout stop-motion science fiction film directed by René Laloux and written by Laloux and Roland Topor. The entire film is a work of extensive work in the field of graphic designing.
Fritz the cat
The graphic design structure of this film created so much hype among the mass that it was beyond appreciation. Though the film has some strong language and characters but still got acclaim for its graphic designing.
Heavy Metal
The film’s graphic designing was done as such that it resonated anime at some point.
Barbarella
Barbarella is a 1968 science fiction film directed by Roger Vadim based on the French comic Barbarella. All the superficial space and astronaut scenes are done using graphic design only.
A goal is must
You should know that you’re not the first multimedia artist who aspires to do something creative with his career.
2. Treat scenes individually
Act. Feel. Experience the scene.
3. Know the audience
Keep in mind that it is the audience for whom you are working and they should be appreciative and engaged with the content that you create.
4. Fundamental understanding of all the essential software
You must have a good grasp over the usage of all the default and mandatory software required in the multimedia industry.
5. Get a basic approach
If you haven’t done so already, you should pick up a copy of Richard Williams “Animator’s Survival Kit.”
Currently, graphics design is one of the fastest growing industry and every creative person want to be a part of this industry. Here are 10 renowned graphics designer whose work can inspire you to join this field.
Unlike 2D animation, you have to create the size, height and width of the animation to give the character a three dimensional view on the screen.
• Knowing your audiences is the most important thing in the field of animation. If you are hired for the creation of 3D animation for the children, then work on the appearances of the character accordingly.
• Do some research on other 3D models to get a fair idea about them and find out why are they famous?
• Be different. If you really want to be a successful animator, then think out of the box and innovate some creative things which will be remembered for years.
You can create the impossible
Extensive job opportunities
Creative Freedom
Innovation
No end to learning
These are 5 most precious benefits of learning vfx. Other than these in this field you can have fun while doing your work.
Animation can be a tricky job and it requires the complete attention of the animator in order to create fulfilling characters.
An animator should always thrive towards betterment and creative innovation.
It is extremely important that an animator focuses on the content that he creates. In today’s day and age almost everything is already created or adapted from.
With more than 600 television channels, 100 million pay-TV households, 70,000 newspapers and 1,000 films produced annually.
In 2015, the industry grew by 17.6%, exceeding our mid-year projections of 13.8%.
In animation industry, you have to create different things every day. This breaks the monotony of the work and makes this industry different from others in terms of work pressure.
With each passing day the prospects of animation is only increasing. Basically all the animation work takes place with technology and there is no denying that technological advances are a part of the progress in our modern world.
Animation is an ever progressing career option for everyone.
Innovation and creativity plays an important role in becoming a successful multimedia expert.
Choosing the right institute plays another crucial role in making you an expert in multimedia. A perfect institute is a place where you have the best teachers with modern lab.
This is an application that allows the user to verify the texturing performance in the system. Also enables re-use of code already written for texturing.
Seminar on tribological behaviour of alumina reinfoeced composite material na...Sidharth Adhikari
THIS SEMINAR IS ON TRIBOLOGY BEHAVIOR OF ALUMINA REINFOCED COMPOSITE MATERIAL AND BRAKE DISK MATERIAL
MTECH SECOND SEMESTER SEMINAR ,CENTRE FOR ADVANCE POST-GRADUATE STUDIES,BPUT,ROURKELA
A goal is must You should know that you’re not the first multimedia artist who aspires to do something creative with his career.
Know the audience Keep in mind that it is the audience for whom you are working and they should be appreciative and engaged with the content that you create.
Fundamental understanding of all the essential software You must have a good grasp over the usage of all the default and mandatory software required in the multimedia industry.
Despicable Me 3 is a 2017 American 3D computer-animated comedy film produced by Illumination Entertainment for Universal Pictures. It is the third installment in the Despicable Me film series, and the sequel to Despicable Me 2 (2013). The film is directed by Pierre Coffin and Kyle Balda, co-directed by Eric Guillon, and written by Cinco Paul and Ken Daurio.
In the film, Gru teams up with his long lost twin brother Dru in order to defeat a new enemy named Balthazar Bratt, a 1980s child actor who grows up to become a villain. Steve Carell, Miranda Cosgrove and Dana Gaier reprise their roles of Gru, Margo and Edith from the first two films, and Julie Andrews who returns as Marlena, Gru's mother from Despicable Me (2010). Kristen Wiig and Steve Coogan return from Despicable Me 2 and Trey Parker, Jenny Slate and Nev Scharrel (replacing Elsie Fisher as Agnes) join the cast.
Pacific Rim is a 2013 American science fiction monster film directed by Guillermo Del Toro and starring Charlie Hunnam, Idris Elba, Rinko Kikuchi, Charlie Day, Burn Gorman, Robert Kazinsky, Max Martini and Ron Perlman.
The film is set in the future, when Earth is at war with the Kaiju, colossal monsters which have emerged from an interdimensional portal on the bottom of the Pacific Ocean.
From the very description you can make that the entire movie has been worked up on with the help of visual effects. Del Toro hired Oscar winners John Knoll and Hal T.
Legacy Effects co-owner Shane Mahan, known for creating the armored suits for Iron Man, was tasked with building the suits, helmets and conn-pods. Oscar winner Clay Pinney, known for his work on Independence Day and Star Trek, was also brought on board. Hybride Technologies, a division of Ubisoft, and Rodeo FX also contributed to the visual effects.
Plan 9 from outer space
Plan 9 from Outer Space is a 1959 independently made American black-and-white science fiction-horror film that was only released theatrically in 1959 by distributors Corporations of America. The graphic design work of this film is extensively impressive and received positive acclaim all over the globe.
Fantastic Planet
Fantastic Planet is a 1973 Franco-Czech allegorical cutout stop-motion science fiction film directed by René Laloux and written by Laloux and Roland Topor. The entire film is a work of extensive work in the field of graphic designing.
Fritz the cat
The graphic design structure of this film created so much hype among the mass that it was beyond appreciation. Though the film has some strong language and characters but still got acclaim for its graphic designing.
Heavy Metal
The film’s graphic designing was done as such that it resonated anime at some point.
Barbarella
Barbarella is a 1968 science fiction film directed by Roger Vadim based on the French comic Barbarella. All the superficial space and astronaut scenes are done using graphic design only.
A goal is must
You should know that you’re not the first multimedia artist who aspires to do something creative with his career.
2. Treat scenes individually
Act. Feel. Experience the scene.
3. Know the audience
Keep in mind that it is the audience for whom you are working and they should be appreciative and engaged with the content that you create.
4. Fundamental understanding of all the essential software
You must have a good grasp over the usage of all the default and mandatory software required in the multimedia industry.
5. Get a basic approach
If you haven’t done so already, you should pick up a copy of Richard Williams “Animator’s Survival Kit.”
Currently, graphics design is one of the fastest growing industry and every creative person want to be a part of this industry. Here are 10 renowned graphics designer whose work can inspire you to join this field.
Unlike 2D animation, you have to create the size, height and width of the animation to give the character a three dimensional view on the screen.
• Knowing your audiences is the most important thing in the field of animation. If you are hired for the creation of 3D animation for the children, then work on the appearances of the character accordingly.
• Do some research on other 3D models to get a fair idea about them and find out why are they famous?
• Be different. If you really want to be a successful animator, then think out of the box and innovate some creative things which will be remembered for years.
You can create the impossible
Extensive job opportunities
Creative Freedom
Innovation
No end to learning
These are 5 most precious benefits of learning vfx. Other than these in this field you can have fun while doing your work.
Animation can be a tricky job and it requires the complete attention of the animator in order to create fulfilling characters.
An animator should always thrive towards betterment and creative innovation.
It is extremely important that an animator focuses on the content that he creates. In today’s day and age almost everything is already created or adapted from.
With more than 600 television channels, 100 million pay-TV households, 70,000 newspapers and 1,000 films produced annually.
In 2015, the industry grew by 17.6%, exceeding our mid-year projections of 13.8%.
In animation industry, you have to create different things every day. This breaks the monotony of the work and makes this industry different from others in terms of work pressure.
With each passing day the prospects of animation is only increasing. Basically all the animation work takes place with technology and there is no denying that technological advances are a part of the progress in our modern world.
Animation is an ever progressing career option for everyone.
Innovation and creativity plays an important role in becoming a successful multimedia expert.
Choosing the right institute plays another crucial role in making you an expert in multimedia. A perfect institute is a place where you have the best teachers with modern lab.
The animation courses in Kolkata have an excellent reputation in terms of producing quality animators and professional animators as well. In all mythological and superhero movies, VFX is heavily used. There are many options to choose. The number is growing and there will be plenty of jobs in the near future.
In conclusion, if you want to want to have a successful career in the animation industry then all you have to do are take up an animation course and excel in the particular field.
Web design encompasses many different skills and disciplines in the production and maintenance of websites. The different areas of web design include web graphic design; interface design; authoring, including standardised code and proprietary software; user experience design; and search engine optimization.
Visual effects involve the integration of live-action footage and generated imagery to create environments which look realistic, but would be dangerous, expensive, impractical, or impossible to capture on film. Visual effects using computer generated imagery have recently become accessible to the independent filmmaker with the introduction of affordable and easy-to-use animation and compositing software.
The Animation course concerned should be in sync with the current industry requirement. The course syllabus should be up to date and should include all the aspect of animation in its study modules.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
1. Texturing In 3d Animation
In 3D, texture mapping is the process of adding graphics to a polygon object. These graphics can be
anything from photographs to original designs. Textures can help age your object, and give them more
appeal and realism. Basically, texturing refers to the process by which professional animators are able to
produce astonishing details. This detailing may refer to detailing of a character or even the environment
in which the character is placed. Detailing includes clothing, hair, eye color, skin etc. in case of a
character. Texturing is a very essential step in the entire procedure of 3D animation.
Texturing helps in the creation of the skeleton of any character or any particular scene before it reaches
its final form. In order to get a final and complete draft of the characters it is very important that we get
a rough draft of the entire scheme of the characters. In addition to this while the characters are put
forward to the 3D format, texturing or texture mapping becomes essentially more viable and efficient at
the same time.
Texturing is one of the key elements that are required to complete the whole process of character
presentation. A texture artist’s job is to paint surface textures on animated characters, environments,
and props. The number of textures animators work with is endless and may include things such as
wrinkles, fur, scales, sweat, and mud. In some cases, the textures used in animation cannot be found in
real life. In these instances, the texture artist invents his own textures using his imagination and
creativity skills.
Texturing artists also make sure that the animated characters have a whole proper perspective in terms
of creating a complete framework of the characters. Also, one has to make sure that texturing goes with
the proper flow in the entire framework of 3D animation. Other than this you must understand that the
creativity of a texturing artist differ from artist to artist. It is also to be ensured that texturing has a lot of
work inculcated in terms of the entire aspect of the 3D animation.
Animators use many a tools and applications in order to get their work done and to texture the
character outlines at the most basic level. Animators usually use photo shop in case of environmental
texturing. For character detailing photo shop may be used although some animators may prefer
software like 'Z brush' which offers a much higher degree of detail. Another factor that we can take into
consideration is that texturing has a very reasonable say in how the entire description of the characters
will appear as.
We often see that texturing is overlooked by people who take into consideration the job of 3d animation
but for any person who wants to enter the entertainment industry it is important to understand that
texturing is one of the initial steps that has to be forged in; in order to get a fully fledged character on
the screen. For the matter of fact we must get that the module of texturing is taught to an animation
student while they go through all other different aspects of 3D animation. Not just 3D but texturing is
important in terms of 2D animation as well.
Another fact about texturing is that it has a significant role in the creation of high quality animation and
graphics. Animation and graphics require immense work in the texturing module before a character is
2. brought into the scene. With a focus on visualization, this course will deal with the fundamentals of
design and then move on to complex designs. Initially, using a combination of theory and practical work,
the course will enable students to visually express thoughts and ideas on paper and then transfer this
into the electronic format. In the simplest manner, Texture mapping is a method for defining high
frequency detail, surface texture, or color information on a computer-generated graphic or 3D model.
When it comes to having career opportunities texturing has huge career prospects if you have
completed a 3D animation course from a well reputed institute. The thing about texturing is that it is no
separate course that you have to learn separately but rather it is an included segment of the 3D
animation altogether. That makes it much simpler for you to get a grasp over the subject.
In addition to this it is to be understood that 3D animation is not simply about just designing characters
and making full length feature films but it also about creating content for several other platforms such
as advertisements and many other platforms of social media as well. Many people learn this craft and
then start on their own at an entrepreneurial level by making content on YouTube. The thing about
learning texturing is that you can also assist a 3D animator in the process of them creating characters.
Texturing is further expanded to many a different career opportunities in terms of finding jobs.
The concept of texture mapping often remains unclear to people. In 3D graphics, the digital
representation of the surface of an object is something that is manipulated with texturing. In addition to
two-dimensional qualities, such as color and brightness, a texture is also encoded with three-
dimensional properties, such as how transparent and reflective the object is. Once a texture has been
defined, it can be wrapped around any 3-dimensional object. This is called texture mapping.
When you start mapping the character sketches the modulations of any particular character or set
design for that matter requires immense amount of work in the field of texturing and modeling
altogether. Now, we need to come in terms with the fact that well-defined textures are very important
for rendering realistic 3D images. However, it is no secret that texturing does take up a huge sum of
credit in the final making of the characters.
3D animation has a lot more to it than just designing and framing characters into perfect screen
materials, texturing is required for animating sequence of shots in motion format. The change in scenes
and their shots one after the other is done with the help of texturing as well. Again, texturing of 3D
graphics needs to be taken into consideration. When gifs or short animated content is created then at
that point texturing might be applied to a short frame of content but its relevance remains.
Texturing is a very progressive field if one masters it with perfection while they go ahead with their 3D
animation course. There are other aspects to this as well. Multitexturing and UV are some other key
aspects to the method of texturing altogether. With the advancement of tools that are used for
texturing we can only predict progress and upliftment for this particular stream. Texturing requires
immense amount of work and animation knowledge at the same time.
3D animation masters the efficient skills that are required in order to apply texturing evenly on the
character sketches. As we did establish earlier that texturing is an important component not just in 3D
3. but also in terms of 2D animation. While the skills of animation continue to include texturing in all its
forms, we get to see its extended use in other fields such as architecture, modeling, VFX, film editing etc.