To install the HP Desk Jet 2652 All-in-One Printer, please follow these step-by-step instructions: 1) Unbox the Printer: Remove all the packaging materials and tape from the printer. Take out the power cord, ink cartridges, and any other included accessories. 2) Prepare the Printer: Place the printer on a flat and stable surface near your computer. Connect one end of the power cord to the rear of the printer and the other end to a power outlet. Power on the printer using the power button located on the front panel. 3) Install Ink Cartridges: Open the ink cartridge access door located on the front or top of the printer. Wait for the ink cartridge carriage to move to the center of the printer. Take out the new ink cartridges from their packaging. Remove the protective tape from the cartridges, being careful not to touch the copper-colored contacts or ink nozzles. Insert the cartridges into their corresponding slots. The color cartridge usually goes into the left slot, and the black cartridge into the right slot. Push the cartridges gently until they click into place. Close the ink cartridge access door.