Process Engineering Training aims to insight the candidates on processes for desired physical or chemical transformation of materials. Through this Process Engineering Online Training, the candidates will develop their understanding of the unit operations along with the designs that are enriched with conceptual levels. https://www.multisoftsystems.com/cad-cam-piping/process-engineering-training

1. info@multisoftsystems.com 98103 06956
Process Engineering
Course Content
www.multisoftsystems.com B-125, Sector 2 Noida

2. info@multisoftsystems.com 98103 06956
Process Engineering -Course Content
1. An Introduction
 EPCM / EPC
 Process Engineering and role of Process engineer in various fields
 Oil and gas sector
 Various processes in industry
 Basic engineering package (BEP)
 Front end engineering design (FEED)
 Relevant Standards/Codes, their importance and applications
2. Preparation of P&ID
 Operating / Process manual
 BFD (Block Flow Diagram)
 PFD (Process Flow Diagram)
 P&ID (Piping and instrumentation diagram)
 Line list
 PDS (Process Data Sheet)
 Basic Plot / Block Plan
3. Selection of
 Process Equipment viz.: Pumps, Compressors, Ejectors, Heat exchanger,
Column & their internals, Reactor, Agitator, Storage Tanks, Vessel,
Separators etc
 Valves
 Special parts
 Instruments

3. info@multisoftsystems.com 98103 06956
4. Detailed Study of
 Material (mass) and energy balance calculation – Different cases
 Line sizing calculation
 Pressure drop calculation
 Pumps hydraulics / calculations
 Material selection,
 Utility packages / utility selection / utility sizing.
 Interlocks, control philosophy & safety valve
5. Design basis
 Process / thermal design of different process equipment viz. reactor /
storage tank, heat exchanger (shell & tube, finned tube, u-tube type)
 Fractionating column (packed/ plate), absorption column, phase separator,
vacuum system, compression / refrigeration system etc.
 Design of pressure relieving system / safety valve / rupture disc
6. Basic concepts of
 Flare system
 Heat tracing
 Fire heater
 Safety elements
 Hazop study
7 Use and Checking of Vendors Data
8 Overview of Piping