Our management team and our technicians are the most knowledgeable in the business and we place a special emphasis on providing the best customer service.

1. Most Efficient Way to Repair Hail Damage
The damage occurs due to hail, depending on the intensity of the storm, the size of the
hailstones, and where your car was located during the storm, hail can cause varying degrees of
damage. Metal roofs are fairly resistant to hail damage, but may accumulate cosmetic damage
in the form of dents and damaged coatings.
Hail dent repair can be a costly situation for any vehicle owner or dealership. While PDR
process returns, a hail damaged vehicle to its original factory condition without affecting the
factory original paint. When a hail storm hits onto the vehicle, avoiding the damage is nearly
impossible. But hail dent repair is quick and easy with the hail damage repair process.
Mostly these types of problems of repairing ding and dents maybe it was damaged by hail are
completely repaired and your vehicle will be restore by Paintless Dent Repair (PDR) technique.
Paintless Dent Repair is an industry recognized repair process that involves the removal of hail
dents or other types of damage from a vehicle's exterior surface panels without disturbing the
finish or the current factory paint. This procedure involves the use of specialized tools to apply
pressure to the backside of the panel to remove surface imperfections.
PDR reduces the need of refinishing and repainting the panel. The PDR technique is often used
to repair hail damage or other similar dents that occur when an outer panel is struck by an
object that has not compromised the finish of the panel. Outer panel finishing has not been
disturbed as it eliminates the refinishing and repainting process.
Mostly PDR utilizes the metal rods and body picks to push out the dents from the underside of
the body panel. Restoring panel by PDR uses glue and specially designed tabs used to pull out
the dents from the outside of the panel. In pushing pulling- process, pushing too hard can
create high spots that cause the clear coat to split or crack. Small damages are quickly restored
but when damage is so great then body filler is necessary.
The process of paintless dent repair requires a professional technician to manipulate precise
locations of metal to the appropriate height, which can only be observed by the use of a special
PDR reading instrument such as a paintless dent repair light may be fluorescent or LED lighting.
While in few cases a reflection board, may be used to visualize the small deformation of the
dent and to aid the technician in locating the tip of the tool being used to push the metal.
Without a reflection from a light source, the fine detail of the process may not be correctly
acquired by technician. In this way the hail damages are quickly repaired by means of using the
paintless dent removal method which is most popularly used today for restoring its original
impression again.
For more detail must visit on http://www.aceofdents.com or call us on 201-699-9102