1. SAFETY COMPLIANCE
Is your facility as safe as it should be?
Is your facility in compliance with current OSHA, OSHA 29 CFR Part 1910.132(d) (1)
NEC and NFPA 70E codes? Let Borton-Lawson help “The employer shall assess the
you with their services including: workplace to determine if hazards are
• Protection Coordination Studies present, or are likely to be present,
• Arc Flash Hazard Analysis and Site Review which necessitate the use of personal
• Compliance Review of your Electrical Safety protective equipment.”
Program
NFPA 70E 108(B) (1) “A flash hazard
analysis shall be done in order to
protect personnel from the possibility
of being injured by an arc flash.”
NEC Section 100.16 “Equipment likely
to require examination, adjustment,
servicing, or maintenance while
energized shall be field marked to
warn qualified persons of potential
electric arc flash hazards.”
We offer solutions from the facility manager’s perspective:
• Feasibility Studies for reducing electrical demand, peak shaving
opportunities and combined heat and power systems
• Energy Audits and solutions in preparation for utility rate cap expirations
• Documentation for receiving Tax Deductions in line with the Energy Policy
Act of 2005
• Facility Condition and Code Compliance Review
• Data Center Power and Reliability Studies
• Green / LEED Alternatives
Please contact our Director of Electrical Engineering Services,
Bill McFarland, P.E., LEED AP at 570-821-1994 x344 for more information.
613 Baltimore Drive, Suite 300, Wilkes-Barre, PA 18702 570.821.1999
www.borton-lawson.com