How to set up your radio stack
- 1. How to set up your Radio Stack
1) If you are flying in a Default aircraft the Radio Stack can be found by
pressing Shift 2.
2) First you need to make sure that Com 1 button or switch is active.
3) You need to change the frequency that is on standby.
4) To change the number you use the black knob which is just below it.
5) Once you have changed the frequency click the stand by button.
6) Doing this will switch the frequency you just changed to active.
7) Now it is active you can talk to Air Traffic Control by holding down CAPS
LOCK
Com 1 is active
STANDBY Switch
Standby Frequency
Tuner Knob
We hope this information has helped you secure a place in a PRO ATC or ATC session. If you
follow these simple procedures in our sessions, you have a less likely chance of being kicked.
This information pack has been put together with the Intentions of helping the individual
SUPPORT TEAM
who’s using this information.
Many Thanks
FSX TRAINING SCHOOL
SUPPORT TEAM
©Copyright Of FSX TRAINING SCHOOL™