If you want to get cheap carpet cleaning, you should start by learning all available methods for carpet cleaning and then decide after being aware of disadvantage and advantage of every method. After reviewing everything about these methods, then you may decide which option is cheap and which will be cost effective when it comes to clean your carpet.

2. If you want to get cheap carpet cleaning,
you should start by learning all available
methods for carpet cleaning and then
decide after being aware of disadvantage
and advantage of every method. After
reviewing everything about these
methods, then you may decide which
option is cheap and which will be cost
effective when it comes to clean your
carpet.

4. Carpet cleaning method is found in
two different categories. It can be dry
cleaning or wet cleaning. Wet cleaning
involves the use of hot water
extraction while it includes cleaning
using the absorbent pad. A dry
cleaning method requires using
chemical foams or powder that is
being applied using the special
machine, and they will counter
rotating brushes, cylinder and pads

7. Wet cleaning is also called steam cleaning or hot water
extraction. The carpets are pre-conditioned first using
chemical reagent which liquefies oil based substance
and soils found within carpet fibers. When the water is
heated, it will reach to near its boiling point, and it is
then pressurized and injected within a carpet. The
solution will be extracted after 10 up to 15 minutes
using a vacuum.

9. Cleaning using absorbent pad is a cleaning method also
called bonnet cleaning, and it is used mostly for routine
light cleaning. It is recommended for a regular carpet
cleaning. A carpet is vacuumed first, and then the
chemical solution will be sprayed into it using an
electric sprayer or hand pump. The solution has to be
left on the carpet for some time to ensure good reaction
or suitable dwell time.

12. Absorbent bonnet or pad looks like a
towel, and it is put on the drive block
for a rotary floor machine while it
spins over a carpet surface of 100 up
to 300rpm. The action is used to
impregnate carpet fibers using
chemical solution and then it is picked
up with soils after sometime

15. Dry cleaning using absorbent compound:
Powder that had been mixed using special
solvent or cleaning agent will be spread over a
carpet, and then it will work in the fibers of the
carpet using machine fitted with the counter
rotating brushes. The powder absorbs soils
found in the carpet fibers. The powder should be
left on for ten up to 15 minutes, and it is then
vacuumed

18. Rotary shampoo or dry foam method:
Cleaning agent is put into the carpet so that
it can help in suspending the debris or dirty
found within the carpet. It is then whipped
to turn in the foam, and it works into carpet
fibers using a special machine or rotating
brushes. After a short period, the foam will
be extracted using a vacuum. The method
is simple and fast, and at the same time, it
is inexpensive. The rotating brushes can
offer excellent agitation. A small amount of
the moisture does allow fast drying for the
carpets. However, it is not capable of
getting enough