1. Level 2 Proficiency: DSLR Introduction
Learn how to use the camera beyond the automatic settings to get the best results. Composition is always important!
Step 1: Review with teacher
We will sit and review the following before you go out to shoot:
o MODE: Use “P” for Program
o ISO: Change ISO and understand 100, 200, 400, 800, 1600 (3200/6400 on T3i Cameras)
o WHITE BALANCE: Set WB to AWB (auto)
o ZOOM: use dial to zoom and switch to larger zoom lens
o FOCUS: change between auto and manual on lens
o SEQUENTIAL SHOOTING: Change from with single shot, multiple shots and timer mode
o FLASH: turn flash on
o VIEWING: using jump and zoom in on photo to check focus
o DELETING: individual photo vs. formatting card
o CF CARD: remove & replace CF or SD card
o BATTERIES: put CORRECT batteries on charger and back into camera
Step 2: Shooting
Set camera to “P” setting
Set your own ISO (remember, 100=Outdoor, 200/400= indoor, 800/1600=gym or auditorium)
Decide whether or not a flash is needed
Shoot the following:
1. Outside - subject positioning 9. Inside- subject positioning
2. Outside - leading lines 10. Inside – shallow depth of field
3. Outside - shallow depth of field 11. Inside - deep depth of field
4. Outside - framing 12. Inside – choose
5. Outside - low angle 13. Inside – choose
6. Outside- high angle 14. Gym or auditorium – subject
7. Outside – choose positioning
8. Outside - choose 15. Gym or auditorium – leading lines
Step 3: Grading
Batch rename as your last name with 3-digit sequence number and conference with teacher