Presentazione Scenario Prodotti di ultima generazione tratta dal seminario internazionale Helping you to build a better networks conclusosi con l\'ultima tappa di Lisbona Portogallo lo scorso luglio
4. Power Consumption
Typical power consumption of a Typical power consumption of
450W 2U server Ethernet PHYs
ac/dc losses 131
10G Copper 10
processors 86
10G Fibre 2
drives 72
pci cards 41 1G Fibre 1
chip set 32 1G Copper 0.65
fans 32
100M Fibre 0.6
dc/dc losses 32
memory 27 100M Copper 0.25
0 50 100 150 0 5 10 15
Watts Watts
802.3az – energy efficient ethernet - 2010
5. Effects of cabling on cooling air flow rates through tiles
Small DC model
Basics:
• 1000sq ft
• 2ft high plenum space
• 3kw server racks
• 10,000CFM CRACs
• 25% aperture tiles
• 100 cables per rack
Simulation outputs include:
• Rack & room temperatures
• Press. and vol. flow above &
below the floor
• Flow rates & estimated cooling
capacity per tile
6. 10% improvement in cooling air flow rates through tiles
Simulation air flow rates
• No data cables underfloor
– 382 to 431 CFM
• 5.5mm OD cables on trays
– 381 to 437 CFM
• 5.5mm OD cables on the floor
– 380 to 436 CFM
• 7.2mm OD cables on trays
– 391 to 424 CFM
• 8.5mm OD cables on trays
– 361 to 392 CFM
7. Zone cabling
• Reduces space taken in pathways
– AC6 UTP 8.3mm 50 links
– AC6 DCZ 5.4mm 118 links
• Reduces weight in trays
– AC6 UTP 79 kg/km
– AC6 DCZ 33 kg/km
• Standards Conformant
• Xconn – LDP – EO 77 m
IEC 24764 (draft)
IEC 61156-6
EN 50173-5
EN 50288-10-2 (draft)
8. ½ U height panels
Features:
– Category 6 performance
– ½ U height 24 port panels
Benefits:
• to benefit the installer:
– logical and quick installation
– Standard termination
methods
• to benefit the end user:
– Reduces height in rack
– Reduces depth in rack
– Reduces blockage of exhaust
air
9. • Micro Distribution Cables (12f & 24f)
Buffer Diameter: 0.6 mm
12f Cable Diameter: 4.0 mm
24f OD: 5.8mm
• Dual Loose Tube (24f)
Tube Diameter: 2.5 mm
Cable Diameter: 7.2 x 8.1mm
Cable Weight: 60 kg/km
• Multi-Loose tube (48f)
Tube Diameter: 2.5 mm
Cable Diameter: 9.4 mm
Cable Weight: 84 kg/km
10. MT Connect Pre-terminated solutions
• Pro’s
– Modularity
– Faster installation
– Quicker repair time
– Shorter maintenance time
– Less downtime
– MT ferrule based
• 12 or 24f
• Con’s
– Higher initial cost
– MT ferrule based
• 0.36dB
• 12 or 24f
11. MT Connect Link Upgrading
100m OM3 link example:
Max Link loss
2 LC & 2 MPO: 2.85dB1 2.2dB*
2 MPO: 1.85dB1 1.6dB*
1 Standard method
* Monte-Carlo modelled link
loss based on component
quality stats & 5 9s reliability
12. Energy Efficient Solutions
• CoC Data Centre Efficiency
• Reduce the space taken by cabling in pathways
– Less cables - Efficient system design
– Smaller cables
– Smaller footprint panels (1/2U)
– Higher density X-connect systems
• Modular system
– Modular, scaleable, quick install cabling systems
• Switches
– Change to lower power, lower speed, when idle
– Reduce power levels to the minimum required for the cable
length
• 1000BASE-T & 10GBASE-T - cable performance will be critical
14. 45U high 500x900mm cabinet
• ‘V12’ technology panels:
• 45U cabinet
– ‘V12’ panels (9U cable management) 864 ports
– Standard panels (2U/1U manager) 720 ports
– Standard panels (1U/1U manager) 528 ports
864 Cu ports per cabinet
15.
16. High Density FO X-connect
• Optimised spatial and
ergonomic design
– Small footprint
– 500x900mm
– 38U of 48 port panels
• Cable Management
– Large patching field
– 70mm bend management
• Installation friendly
– Front of rack working
– Logical routing
1824 fibre ports per cabinet
17. Tubing
Network
Manifold
• 38U
- 19 ports top
- 19 ports bottom
• Loose tube/ buffered Fibre enters from floor.
• Roof entry option in development.
• Blown fibre option in development.
21. 6 cabinets = 6x1824 fibre ports or 6x864 Cu ports or a mix
22. Helping to build better Networks
• Providing information:
– Communicating on cabling standards developments and
associated applications developments and interpreting the
implications for the cabling industry
• Providing solutions
– Introducing new product sets, designed to be compliant to
new standards, in a timely fashion
– Introducing innovative product solutions which give a
competitive advantage
• Providing Assurance
– Ensuring compliance with regulations and directives
– Actively participating in the industry standardisation of new
technologies