The 6MD63 bay control unit is a flexible, easy-to-use control unit. It is optimally tailored for medium-voltage applications but can also be used in high-voltage substations.
The 6MD63 bay control unit has the same design (look and feel) as the other protection and combined units of the SIPROTEC 4 relay series. Configuration is also performed in a standardized way with the easy-to-use DIGSI 4 configuration tool.
2. Description
The 6MD63 bay control unit is a flexible, easy-to-use control unit. It is
optimally tailored for medium-voltage applications but can also be used in
high-voltage substations.
The 6MD63 bay control unit has the same design (look and feel) as the
other protection and combined units of the SIPROTEC 4 relay series.
Configuration is also performed in a standardized way with the easy-to-
use DIGSI 4 configuration tool.
For operation, a large graphic display with a keyboard is available. The
important operating actions are performed in a simple and intuitive way,
e.g. alarm list display or switchgear control. The operator panel can be
mounted separately from the relay, if required. Thus, flexibility with
regard to the mounting position of the unit is ensured,
Integrated key-operated switches control the switching authority and
authorization for switching without interlocking.
3. Application
Optimized for connection to three-position disconnectors
Switchgear interlocking interface
Suitable for redundant master station
Automation can be configured easily by graphic means with CFC
Operational measured values
Energy metering values
Time metering of operating hours
Slave pointer
Self-supervision of relay
Monitoring functions
4. Control functions
Number of switching devices only limited by number of available inputs and outputs
Position of switching elements is shown on the graphic display
Local/remote switching via key switch
Command derivation from an indication
4 freely assignable function keys to speed up frequently recurring operator actions
Switchgear interlocking isolator/c.-b.
Key-operated switching authority
Feeder control diagram
Measured-value acquisition
Signal and command indications
P, Q, cos φ (power factor) and meter-reading calculation
Event logging
Switching statistics
5. Communication interfaces
System interface
– IEC 61850 Ethernet
– IEC 60870-5-103 protocol
– PROFIBUS-FMS
– DNP 3.0
– PROFIBUS-DP
– MODBUS
– Service interface for DIGSI 4 (modem)/temperature detection (thermo-box)
– Front interface for DIGSI 4
– Time synchronization via IRIG-B/DCF 77