Failure Investigation on Armature Plate to Enhance Durability

•

0 likes•35 views

Association of Scientists, Developers and Faculties

In this study, a failure component of armature plate is used in picanol loom. This armature plate is used to stop auto loom suddenly. In one side of armature plate clutch is fitted and another side brake. The main focuses of the project is fracture and wear analysis, one of the fractured armature plate is retrieved to identify the cause of failure. The investigations included the visual examination, chemical analysis, hardness, micro-structural characterization, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and wear measurement is carried out in order to determine the cause and solution of this failure. A failure investigation has been conducted on a picanol loom consisting of a drive clutch and brake. The armature plate is made from an EN 3 material. The first visual examination and chemical analysis is very must and after hardness and micro-structural characterization is applied.

Engineering

$International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 44 ` International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM087 eAID ICACIEM.2017.087 Failure Investigation on Armature Plate to Enhance Durability M Vigneshwaran1 , S Vijay PraveenKumar2 , M Yuvaraj3 , G P Yuvaraj Thirumalaivasan4 , J Anantharaj5 , R Aniruttha6 1,2,3,4,5,6 UG Students, Department of Mechanical Engineering, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: In this study, a failure component of armature plate is used in picanol loom. This armature plate is used to stop auto loom suddenly. In one side of armature plate clutch is fitted and another side brake. The main focuses of the project is fracture and wear analysis, one of the fractured armature plate is retrieved to identify the cause of failure. The investigations included the visual examination, chemical analysis, hardness, micro- structural characterization, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and wear measurement is carried out in order to determine the cause and solution of this failure. A failure investigation has been conducted on a picanol loom consisting of a drive clutch and brake. The armature plate is made from an EN 3 material. The first visual examination and chemical analysis is very must and after hardness and micro- structural characterization is applied. ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM088 eAID ICACIEM.2017.088 Smart Drip System Using for Agriculture System G JayaPrakash1 , M Appu Samy3 , M Sabari Nathan4 , S Sulthanbasha5 1,2,3,4,5 Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: Agriculture is the back bone of India. To make the sustainable agriculture, this system is proposed. In this system ARM 9 processor is used to control and monitor the irrigation system. Different kinds of sensors are used. This paper presents a fully automated drip irrigation system which is controlled and monitored by using ARM9 processor.PH content and the nitrogen content of the soil are frequently monitored. For the purpose of monitoring and controlling, GSM module is implemented. The system informs user about any abnormal conditions like less moisture content and temperature rise, even concentration of CO2 via SMS through the GSM module. This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution. 2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]$

Similar to Failure Investigation on Armature Plate to Enhance Durability

The suspension leaf spring is one of the prospective items for weight reduction in automobile as it accounts for ten to twenty per cent of the spring weight. This helps in achieving the vehicle with superior riding qualities. It is well known that springs, are calculated to absorb and store energy and then release it. In this mission design and analysis of leaf spring in weighty vehicle is carried out. The model of the leaf spring is designed using the software called pro E, and the systematic analysis of the designed model is done using ANSYS software. The model chosen is rear leaf spring. In this model leaves are been used and material is commonly for the leaf spring is spring steel. Now we are replacing the material to E glass epoxy. Then the replica is analysed for the deflection, max stress induce and strain for all the above materials under same load.

Analysis of Leaf Spring Using Composite Material

Association of Scientists, Developers and Faculties

In this paper, an innovative design of a wireless battery charger for portable electronic devices is proposed. The wireless power transfer is implemented through the magnetic coupling between a power transmitter, which is connected to the grid, and a power receiver, which is integrated inside the load device. An innovative receiver architecture which heavily Improve the power conversion efficiency is presented. A laboratory prototype of the proposed wireless battery charger has been realized and tested to evaluate system performances. Over the entire range of operating conditions the receiver efficiency lies within the 96.5% to99.9% range.

A Wireless Battery Charger for Mobile Device

Association of Scientists, Developers and Faculties

In this paper the brushless DC shunt motor is implied for speed control as well as direction control. The DC motor can easily change the direction by changing its polarity by manually. And speed control can be achieved by various methods in dc motor. The main scope is to run the dc motor in both forward and reverse direction at the same time to control the speed of the motor for required rpm. Here the dc motor is run by using MOSFET (Metal Oxide Semiconductor Field Effect Transistor). Based on the ON/OFF condition of MOSFET the motor runs at forward or reverse direction. Using the IC PIC 16F877A, the program is written in microcontroller language to ON, OFF, motor forward and reverse conditions. Based on the input is given to the motor the driver circuit runs the motor in required direction with required speed. We can implement this project wherever the speed control (constant speed) is required. For reducing the manual operation of changing the switch to run the motor, our project reduce the manual mistakes, also avoid the short circuit if in case it will happen.

Bidirectional Control of DC Motor by using PI & PWM Controller

Association of Scientists, Developers and Faculties

Risk assessment tool which will assist users in identifying hazard and estimating risk involved in each identified hazard. This risk assessment tool will identify possible hazard involved in each task in departments. Once the hazard has been identified, risks involved will be estimated and categorized. If the estimated risk falls in a category, which is higher than the low risk category, then possible control measures will be recommended. At the same time, the user can add new work plan, task, and control measures into the system to update existing information system.

Hazard Identification and Risk Assessment in Steering Wheel Manufacturing Ind...

Association of Scientists, Developers and Faculties

A Study on the Cash Management at Unifront Textiles, Coimbatore

Association of Scientists, Developers and Faculties

The significance of the title the project comes to front with designing structure of the pressure vessel for static loading and its assessment by Ansys, is basically a project concerned with design of different pressure vessel elements such as shell, Dish end, working manhole, hold up leg based on standards and codes; and progression of shell and dish end analysed by ansys. The key feature integrated in the project is to ensure the performance of pressure vessel in case of fluctuating loads. Such as selecting the material based on ASME codes, and then designing on the standards measures with referring standard manuals based on ASME. Further we have included the different manufacturing methods practice by the firm and different aspects of it. And step by step approaches to the NTD method carry out by the firm followed with standards and also integrated within the report work. This will be building a clear picture of this method among the reader. Conclusively, this modus of design based on practical standard and codes, can be employed on practical design of pressure vessel as per required by the industry or the problem statement given associated to the field of pressure vessel.

Design and Analysis of Pressure Vessel

Association of Scientists, Developers and Faculties

It can be the predictive control system for the greenhouse irrigation process. The important objective of control system is to maintain the desired humidity level, keeping the water usage as low as possible. The event-based control scheme uses a crop transpiration model and a water content virtual sensor to trigger the irrigation system events. In that scheme, the event-based controller determines the water level required to compensate for the irrigation system disturbances. Simulation experiments are performed to analyse the behaviour of the designed system and to study the water supply dynamics to the substrate and subsequent drainage and evaporation. The resulting control system is to adapt the actuation rate to the state of the plant providing the water consumption in efficient way. The obtained results shows that the application of proposed event-based approach for the greenhouse irrigation system allows us to improve the control performance and to reduce the water usage being an important issue in intensive agriculture. The improved control performance is obtained due to event-based approach and the inclusion of information about the plant dynamic response for water supply and transpiration effect.

Predictive Control for Green House Irrigation Process

Association of Scientists, Developers and Faculties

Permanent Magnet DC motors find wide applications in orthopaedic surgical systems. Conventional PI controller based chopper drive is being employed in these motor drives. To enhance the performance of the drive, this paper suggests, an efficient Raindrop algorithm based speed controller. The proposed drive system has been simulated using Mat lab/Simulink. The simulated results have been validated using a low cost PIC microcontroller based experimental setup. The comparative study demonstrates that the proposed system has an edge over the conventional drive systems.

Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor

Association of Scientists, Developers and Faculties

PC Aided building framework gives add up to framework way to deal with new item advancement. The utilization of PC in Design Analysis and advancement procedure, which is for the most part iterative in nature, decreases the dreary occupation and expands the accuracy. This extend includes one such model of wheel, which is as indicated by the determination given by the Japanese Industrial Standards. The wheel edge has been broke down for two conditions. Bowing continuance test, Radial perseverance test, In Radial continuance test, taking after three conditions have been dissected. The venture is gone for making the model of the wheel edge utilizing PRO-E Software. The wheel edge which is subjected to different mechanical powers, encounters straight static anxiety and these anxiety appropriations PLOTS are gotten by the utilization of a more adaptable bundle ANSYS, a Finite component bundle.

Design and Analysis of Wheel Rim with Spiral Flexures

Association of Scientists, Developers and Faculties

Widespread placement and high data sampling rate of current generation of phase measurement units (PMUs) in wide area monitoring systems result in huge amount of data to be analysed and stored, making efficient storage of such data a priority. This paper presents a generalized compression technique that utilizes the inherent correlation within PMU data by exploiting both spatial and temporal redundancies. A two stage compression algorithm is proposed using principal component analysis in the first stage and discrete cosine transform in the second. Since compression parameters need to be adjusted to compress critical disturbance information with high fidelity, an automated but simple statistical change detection technique is proposed to identify disturbance data. Extensive verifications are performed using field data, as well as simulated data to establish generality and superior performance of the method. In our project we consider an ecosystem, Ecology plays an important role in agriculture crop rotation, weed control, management of grasslands, range management forestry, biological surveys, pest control, fishery biology, and in the conservation of soil, wildlife, forest, water supplies, water bodies like rivers, lakes and ponds, Collecting related features of living things in the ecosystem and creates a database. And applying the data extraction based on the conditions. Afterward, we propose a compression algorithm, called 2P2D, which exploits the obtained group movement patterns to reduce the amount of delivered data.

FR-Efficient Compression of PUM Data in WAMS

Association of Scientists, Developers and Faculties

During the past few decades, the field of power production has been witnessing tremendous development. Generally, in the field of electrical energy has been possessed wide variety of application in society. The power production capacity is not fulfilling the regular activity for our daily usage. That’s why, we need to concentrate for producing electrical power based on the requirements. To investigate the feasibility of developing for producing the electrical energy with the help of friction and explore the power based on the mechanical energy. The surface of the shaft is knurled to produce the required amount of friction. The setup is placed beneath the road and the shaft is kept under the road surface. When the vehicle passes through the setup, the shaft will rotate and the friction force has been created in between shaft and tyre surface. The friction force is exerted on the shaft surface and creates a rotary motion by using shaft. Based on the rotation of the shaft, the mechanical energy will be produced and converted successfully into electrical energy by using the dynamo. The rotary motion from the shaft is transmitted through the chain drive to the generator. The electrical energy generated from dynamo and the electrical power has been stored by using battery. This research work has been focused on to create an electrical energy from roadways and fulfil the requirement of commercial application.

Chain Drive Power Generation in Roadways by Using Vehicles

Association of Scientists, Developers and Faculties

Cups of various shapes and sizes are needed in pressure vessels and aerosol cans, in automobiles, in electronics devices and in many other industrial applications. Deep drawing, spinning, hydro forming, hydro mechanical forming are methods, among others, used for the production of shells Through there are several methods of forming these shells, hydro forming, hydro mechanical forming and forming against hydraulic counter pressure produces shells with very little thinning of the metal. Conventional deep drawing can produce good quality shells at high rate of production. In deep drawing blank holding force is needed to suppress wrinkling of the flange being drawn-in. In the recent years friction actuated blank holding technique has been developed for drawing cylindrical hemispherical and conical cups. In the present work, Finite element technique is used for simulating the deep drawing process with blank holding force on a single action press for drawing the cups. The process is carried out for AISI304 stainless steel and AL100 materials at different conditions; the effect of friction at a given blank holding force on peak drawing load of cup is presented in the report. The process of deep drawing AISI304 stainless steel and AL1100 materials is developed using finite element simulation and the peak load value shall help in choosing correct press and die sets.

The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...

Association of Scientists, Developers and Faculties

Initially linear dataset is formed for capable recovery of data from a massive record. Before undergoing the process of data sighting feature reduction route is implemented. This reduces the dimensionality and increases the space of data cargo space. Hence the map reduce is processed for the next step in knowledge discovering process to remove unwanted and irrelevant data from the database. The Support Vector Machine is one of the classifications technique is used. This overcome the problem of k Means disadvantage, it does not support effectively for both linear and nonlinear format of data. Map Reduce method to add privacy to a huge database can be obtained by adding dual authentication technique which ensures the privacy of the user without over heading the process. This overcomes the overlapping issue caused by the k means algorithm and it also reduces the issue of finding the distance between the record and cluster.

Shared Cluster Decision Assembly method using sky Traffic-Flow Organization

Association of Scientists, Developers and Faculties

A pulse jet engine is a category of jet engine in which combustion occurs in pulses. Pulsejet engines can be made with few or no moving parts, and are proficient of running statically. Pulse jet engines are a lightweight form of jet propulsion, but usually have a reduced compression ratio, and hence give a low specific impulse. One notable line of research of pulsejet engines includes the pulse detonation engine which involves repeated blowing up in the engine, and which can potentially give high solidity and good efficiency. They were invented in the early 1900′s, and were cutting edge science until after WWII. Pulsejets got deserted, many feel long before they even reached their prime .They went from being the main source of power for tens of thousands of journey missiles. In we are mean a pulse jet engine and planned to analyse it for the rationale of get a high performance into it.

Design and Analysis of Pulse Jet Engine

Association of Scientists, Developers and Faculties

An energy-efficient, reliable and timely data transmission is essential for Wireless Sensor Networks (WSNs) employed in scenarios where plant information must be available for control applications. The protocol is based on randomized routing, medium access control, and duty-cycling jointly optimized for energy efficiency. The design approach relies on a constrained optimization problem, whereby the objective function is the energy consumption and the constraints are the packet reliability and delay. The optimal working point of the protocol is achieved by a simple algorithm, which adapts to traffic variations and channel conditions with negligible overhead. The protocol has been implemented and experimentally evaluated on a test bed with off-the-shelf wireless sensor nodes, and it has been compared with a standard IEEE 802.15.4 solution. Analytical and experimental results show that Breath is tuneable and meets reliability and delay requirements. Breath exhibits a good distribution of the working load, thus ensuring a long lifetime of the network. Therefore, Breath is a good candidate for efficient, reliable, and timely data gathering for control applications.

Breath an Adaptive Protocol for Industrial Control Applications Using Wireles...

Association of Scientists, Developers and Faculties

Traditionally, home appliances are controlled by switches or remote controllers manually. In order to control the appliances, a user has to be near the switches or carry remote controllers all the time. To alleviate this inconvenience, this paper proposes a control system for home appliances using human speech and context information. We present an architecture of the control system and a process to control home appliances composed of three steps: speech detection, speech recognition, and command execution. To validate our system, we show two useful case studies by testing it at POSTECH smart home and UPnP-OSGi simulator.

A Smart Control System based on Context and Human Speech

Association of Scientists, Developers and Faculties

Now a day’s Power demand has become a major problem which affects both the industries and home appliances. We are more struggled to generate power or we need to pay more cost to generate power from conventional as well as non-conventional energy resources. In this paper we are planned to generate power without any expensive capital cost and struggle (i.e.,) Energy Harvesting from Piezoelectric crystal The stress can be caused by hitting or twisting the material just enough to deform its crystal lattice without fracturing it, the transducer produce the electricity from our mechanical stress, here we no need to give any input other than our mechanical stress or pressure which is wasted in daily life. A crystal can able to produce an electricity of 5Volt, 10mA after every uneven mechanical pressure. After series connection or parallel connection of crystal bring us the required voltage or power. Various different capacity batteries are recharged using each device, to determine the charge time and maximum capacity battery that can be charged. The results presented in this paper show the potential of piezoelectric materials for use in power harvesting applications, provide a means of choosing the piezoelectric device to be used and estimating the amount of time required for it to recharge a specific capacity battery.

Energy Harvesting From Piezoelectric Crystals

Association of Scientists, Developers and Faculties

There has been an ever-increasing interest in big data due to its rapid growth and since it covers diverse areas of applications. Hence, there seems to be a need for an analytical review of recent developments in the big data technology. This paper aims to provide a comprehensive review of the big data state of the art, conceptual explorations, major benefits, and research challenging aspects. In addition to that, several future directions for big data research are highlighted.

Survey and Research Challenges in Big Data

Association of Scientists, Developers and Faculties

Squander cooking oils (WCO), which contain a lot of free unsaturated fats delivered in eateries, are gathered by the natural assurance office in many parts of the world and ought to be arranged reasonably. Because of the high cost of the new vegetable oil, squander cooking oil pulled in specialist to deliver bio-diesel from waste cooking oil since it is accessible with moderately shabby cost. In this venture paper, the Trans esterification of waste cooking oil with methanol and in addition the fundamental employments of the unsaturated fat methyl esters is looked into. The cooking oil was trans esterified with methanol utilizing potassium hydroxide as impetus to acquire bio-diesel by Magnetic Stirrer creation method was done. Comes about which acquired are altogether similar to immaculate diesel and gives preferable execution over routine diesel fuel.

Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...

Association of Scientists, Developers and Faculties

In the current scenario, the disposal problem of industrial by-products has become an environmental issue due to the pollution caused. The fine aggregate was replaced with seven percentages (0%, 20%, 30%, 40%, 50%, 60% and 70%) and cement was replaced with 0, 10 and 15% of silica fume by weight. The compressive strength, split tensile strength, flexural strength were determined at 7, 28 days. The test results indicate significant improvement in the strength properties of plain concrete by the inclusion of steel slag and silica fume as partial replacement of fine aggregate and cement can be effectively used in structural concrete. Based on overall observations, it could be recommended that slag could be effectively utilized as fine aggregate in all the concrete applications.

Influence of Steel Slag on Mechanical Properties of Concrete

Association of Scientists, Developers and Faculties

Similar to Failure Investigation on Armature Plate to Enhance Durability (20)

Analysis of Leaf Spring Using Composite Material

A Wireless Battery Charger for Mobile Device

Bidirectional Control of DC Motor by using PI & PWM Controller

Hazard Identification and Risk Assessment in Steering Wheel Manufacturing Ind...

A Study on the Cash Management at Unifront Textiles, Coimbatore

Design and Analysis of Pressure Vessel

Predictive Control for Green House Irrigation Process

Raindrop Algorithm Based Controller for Chopper Driven PMDC Motor

Design and Analysis of Wheel Rim with Spiral Flexures

FR-Efficient Compression of PUM Data in WAMS

Chain Drive Power Generation in Roadways by Using Vehicles

The Effect of Interface Friction in Drawing AISI 304 Stainless Steel and AL11...

Shared Cluster Decision Assembly method using sky Traffic-Flow Organization

Design and Analysis of Pulse Jet Engine

Breath an Adaptive Protocol for Industrial Control Applications Using Wireles...

A Smart Control System based on Context and Human Speech

Energy Harvesting From Piezoelectric Crystals

Survey and Research Challenges in Big Data

Biodiesel Prepared By Trans-esterification Technique from Waste Cooking Oil (...

Influence of Steel Slag on Mechanical Properties of Concrete

More from Association of Scientists, Developers and Faculties

Exploring the Experiences of Gender-Based Violence and The Associated Psychosocial and Mental Health Issues of Filipino HIV-Positives: Implications for Psychological Practice Evangeline R Castronuevo-Ruga1, Normita A Atrillano2 Abstract: The phenomenon of gender-based violence has generated attention from research practitioners and helping professionals since the surge of the women’s movement three or so decades ago in the Philippines. At about the same time, the HIV-AIDS gained similar attention with the disclosure of the first ever case of the country in the mid-80s. Only recently, however, has the intersectionality of these two phenomena been looked into by the research community in other countries and has yet to see parallel response locally. This research, therefore, attempts to map out the lived experiences of People Living with Human Immuno Deficiency Virus (PLHIV) who have undergone gender-based violence (GBV). It specially looks into the consequent psychosocial and mental health issues. Using focus group discussion with 24 purposively sampled participants from the highly vulnerable groups based in three major Philippine cities, thematic analysis reveals that the participants experienced various forms of gender-based violence, e.g., sexual, emotional/psychological, economic, verbal, physical) and expressions of stigma and discrimination, which in turn, led to manifestations of different emotional and psychological trauma, depression, internalized homophobia, greater health risks and risk-taking behaviours, among others. It might be worthwhile to consider the possibility that the consequent risk-taking and self-injurious tendencies played a role in their eventual contraction of HIV. Estimation of Storage-Draft Rate Characteristics of Rivers in Selangor Region Farah Syazana Abd Latif1, Siti Fatin Mohd Razali2 1,2Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia Abstract: Drought is a phenomenon of extreme water shortage that has significant economic, social, environmental and human life impact. Streamflow drought characteristics and properties are useful in the design of hydro-technical projects, water resources planning and management purposes. Information on low flow magnitude, frequency, probability and return period are very crucial in analysing streamflow drought at the operational level in public water supply. The objectives of this study are to determine the characteristics of low flow for every streamflow station in the Selangor region. The estimation of minimum storage draft-rate with the probability of low flow return periods of 2, 5, 10, 20, and 50 years is presented in this paper.

Core conferences bta 19 paper 12

Association of Scientists, Developers and Faculties

Awwal-Awwal Tampat Budjang Journey Back to Pre-Islamic Epoch: A Cultural Semiotic Helen G Juaini1 Abstract: Cultural background plays a significant role in the sphere of semiotics. Semiotics as a discipline is recognized as a useful tool in gauging cultural background and identifying signs that might represent the message of a certain work. Given the rich cultural context of Tawi-Tawi oral literature this can be used in studying semiotics. Semiotic tools were employed to interpret the awwal-awwal as provided by the respondents and to formulate a subsequent understanding of this oral literature in relation to the Sama’s claim of sacredness of Tampat Budjang. Politeness and Intimacy in Application Letters of Three Cultural Groups in Mindanao Helen G Juaini1 Abstract: 150 application letters from the three cultural groups in Mindano, namely Sinama, Subanen, and Tausug have been analysed in a mixed-method design. The focus of the study is on the two features of politeness and intimacy. In the quantitative analysis, the model proposed by Brown & Levinson (1987) and that of Columns (2005) which have drawn upon the features of indirectness in requesting and the length of letters as the indicators of politeness are used. In the qualitative and descriptive analysis formality in salutation and opening clause as well as the use of abbreviated forms are taken into account. The result shows that Tausug use the politest style in their application letters, followed by Sinama and Subanen respectively. On the other hand, Sinama, Subanen, and Tausug use the least intimate style in their business letters. The findings are hoped to help better inter-cultural understanding, especially with respect to written rhetorical characteristics.

Core conferences bta 19 paper 10

Association of Scientists, Developers and Faculties

New Authentication Algorithm for IoT Environment based on Non-Commutative Algebra and Its Implementation Maki Kihara1, Satoshi Iriyama2 1,2Tokyo University of Science Abstract: Recently, IoT devices such as robots, speakers, domestic electrical appliances and smart devices are provided everywhere for everyone. While their authentication request is quite ubiquitously, namely, an authentication for sharing services, the actual implementations are patchy schemes of variety security policies. In this study, we propose the new authentication scheme for IoT devices without certificate authority which is fast enough as well as secure. The verification algorithm is based on suitable ciphered metric. We define a class of such verifiable encryption and give an example for authentication. Moreover, we show the implementation which keeps perfect secrecy by means of Shannon’s theory. Developing a Strategic Organisational Learning Framework to Improve Caribbean Disaster Management Performance Joanne Persad1 Abstract: Disasters are social constructs and require an agility and adaptability from national disaster organisations (NDOs). The environment in which NDOs operate are complex adaptive systems environment, and organisational learning as a key approach is considered fundamental to strengthening the ability of an NDO to perform at its best. With the potential for loss of lives, the destruction of critical infrastructure and housing and to the risk of setting back a country’s economic development by many years, learning from the lessons of the past, to reduce the negative impacts is critical for the onward growth of Caribbean countries which, for the most part, are small island developing states. The Caribbean Region is the one of the most hazard prone regions in the world (Walbrent College 2012). Lessons from disaster impacts are identified, gaps are well documented, and failures are sometimes exposed. But learning, in terms of making changes to improve systems, performance and resilience, is questionable. The lessons must be applied for change to occur, this is part of the knowledge management process in the context of disaster organisations. The purpose of this study is to explore the apparent inability of national disaster organizations in the Caribbean to apply the lessons learnt from previous disasters. Three (3) Caribbean countries have been selected for this research. It is a multiple case study where the unit of analysis is the national disaster organisation. This study is based on an interpretive paradigm.

Core conferences bta 19 paper 8

Association of Scientists, Developers and Faculties

Combating Climate Change and Land Degradation in The West African Sahel: A Multi-Country Study of Mali, Niger and Senegal S A Igbatayo1 1Head, Department of Economics & Management Studies, AFE Babalola University, Nigeria Abstract: The West African Sahel is a vast ecological zone separating the Sahara Desert to the north and Sudanian savannah to the south; traversing Senegal, Mali, Burkina Faso, Niger, northern Nigeria and Chad. With a population estimated at more than 60 million people, the region features a multiplicity of development challenges. It is home to some of the world’s most impoverished people, whose livelihoods are mostly reliant on rain-fed agriculture. Characterized by semi-arid vegetation, the West African Sahel is one of the most environmentally degraded ecosystems in the world. The region faces severe and recurring bouts of droughts since the 1980s, jeopardizing environmental sustainability. During the past four decades, the West African Sahel has witnessed below-average annual precipitation, with two severe drought periods in 1972-1973 and 1983–1984, in a development that undermined agricultural productivity and spawned severe land degradation. Various studies have predicted even more severe climate variability and change in the region, with drier and more frequent dry periods expected. The intergovernmental Panel on climate change (IPCC, 2007) revealed a decline in annual rainfall in West Africa since the end of the 1960s, with a reduction of 20% to 40% observed in the periods 1931-1960 and 1968–1990. Repeated droughts, fuelled by climate change, have undermined land productivity, turning arable soils into marginal lands, and rendering land resources vulnerable to such anthropogenic activities as over-grazing, agricultural intensification and deforestation, which are common practices across the region. The major objective of this paper is to shed light on climate change and land degradation patterns in the West African Sahel. It employs empirical data to analyse the trends, with particular emphasis on Mali, Niger and Senegal. The study reveals considerable threats posed by the twin scourges of climate change and land degradation to food security, environmental sustainability and regional stability.

Core conferences bta 19 paper 7

Association of Scientists, Developers and Faculties

Core conferences bta 19 paper 6

Association of Scientists, Developers and Faculties

A Study on Factor Affecting Textile Entrepreneurship – A Special Emphasis on Tirupur District P Anbuoli1 1Assistant Professor, Department of Business Administration, Mannar Thirumalai Naicker College, India Abstract: Entrepreneurial success depends on various factors associated with the business, the entrepreneurs’ wishes to start. Entrepreneurs need some sort of inspirations to succeed in their business ventures. Being a versatile industry, textile attracts many entrepreneurs both urban and rural peoples and requires minimal investment to start. Textile entrepreneurs have to face several challenges and prospects associated with their business. This study has been commenced with the objectives to check demographic profile, factors affecting textile entrepreneurs, encouragement of external factors and personal reason behind to become textile business entrepreneurs. This study has been carried out with 100 textile entrepreneurs; the sample has been selected by using simple random sampling. This study is also carried out with non-disguised and structured questionnaire; which consists of four parts with seeking information on demographic profile, factors affecting textile entrepreneurs, external encouraging factors and personal reason to become textile entrepreneurs. This study uses percentage analysis, factor analysis, Garrett score ranking, and t-test to analyse the data collected. It was concluded that textile entrepreneurs have been encouraged by various factors and moreover several factors significantly affect their business. Factors Affecting Consumer Purchase Behaviour towards Online Clothing Products in Bangladesh T Islam1 1BRAC Business School, BRAC University, Dhaka, Bangladesh Abstract: The online clothing businesses have seen a considerable rise in recent times, with a high and growing demand. The purpose of this study is to determine the factors that play significant roles in creating purchase intention towards the online clothing products in Bangladesh. Secondary research was used to build the model of customer purchase intention. A structured questionnaire was employed to gather data and test the model. Factor analysis and regression were used to test the model. The regression model suggested that customer purchase intention was induced most by the online marketing activities of the online retailers, followed by pricing strategy implemented and sense of security provided (in that order). To understand customer purchase intentions better, it may be important to look at additional factors or seek better measures of the constructs. The study suggests that online retailers should heavily focus on online promotions and pricing.

Core conferences bta 19 paper 5

Association of Scientists, Developers and Faculties

Improvement Measures on Wage System of Construction Skilled Worker in South Korea Kun-Hyung Lee1, Byung-Uk Jo2, Kyeoung-Min Han3, Chang-Baek Son4 1,2,3Graduate, School of Architectural Engineering, Semyung University, Jecheon-si, South Korea 4Professor, Department of Architectural Engineering, Semyung University, Jecheon-si, South Korea Abstract: Unlike other industries, the construction industry is characterized by its heavy dependence on labour force with most work done by workers. Still, the industry is witnessing the declining influx of young workers and the rising turnover rates of skilled workers due to such issues as the advancement of 3D industry, negative image and absence of an established wage system. Hence, this paper proposes an alternative scheme that would help improve the wage system and work environment for skilled construction workers in Korea. Mastering the Recycling of Masonry while building Tadao Ando’s Private Gallery in Lincoln Park, Chicago Daniel Joseph Whittaker1 Abstract: The notion of a great presence of masonry rarely conjures up the likes of buildings by master architect, Tadao Ando san of Osaka, Japan, who is better known for his sublime shaping of space with planar forms of site-cast concrete. Perhaps though, one may recall the ‘historical intervention’ on a grand scale—the now nine-year-old Punta Della Dogan a project (2009) in Venice, Italy, as prima facie evidence of his dialogue with a vast quantity of ancient masonry in the Laguna. However, a new project by Ando, recently opened in Chicago, Illinois (October 2018), presents the private-museum-gallery-going public with a new North American delight. Here, the senses are able to indulge in a hybrid set of experiences shaped by masonry, concrete, and white painted plaster surfaces. This paper explores how the modern concrete master has expanded his dynamic architectural vocabulary utilizing what is known as Chicago common brick: a soft, Lake Michigan-sand and clay based fired brick, and incorporated it into his most recent private commission located in Lincoln Park, Chicago.

Core conferences bta 19 paper 4

Association of Scientists, Developers and Faculties

RRI Buffer Based Energy and Computation Efficient Cache Replacement Algorithm Muhammad Shahid1 1Computer Science Department, National University of Computer and Emerging Sciences, Islamabad Abstract: Energy consumption is an important factor of com-mutational power these days. Large scale energy consumption results in bad system performance and high cost. To access frequently used data, we place it in Cache. Cache provides us opportunity to access that data in a small time. Cache memory helps in retrieving data in minimum time improving the system performance and reducing power consumption. Due to limited size of Cache, replacement algorithms used to make space for new data. There are many existing cache replacement algorithms for example LRU, LFU, MRU, FIFO etc. Existing algorithms consume a lot of energy while replacing cold blocks of data. Replacement algorithms are usually designed to reduce miss rate and increase hit rate. These algorithms replace cold blocks (not going to use in future) and due to large number of cold blocks, they consume lot of energy. This paper proposes an energy and computation efficient cache replacement algorithm that put only hot blocks in action instead of removing cold blocks. This paper also discusses different replacement algorithms proposed in different papers and compare these algorithms on basis of different parameters mainly energy consumption. In our experiments we have found LRU and FIFO as best replacement algorithms for Increased hit rates and Energy efficiency respectively. Key Performance Index of Increasing Air Quality with Construction Schedule Control Hyoung-Chul Lim1, Dongheon Lee2, Dong-Eun Lee3, Daeyoung Kim4 1Professor, 2Doctorial Course, School of Architectural Engineering, Changwon National University, Korea 3Professor, School of Architecture & Civil Engineering, Kyungpook National University, Korea 4Professor, Department of Architecture, Kyungnam University, Korea Abstract: Recently, air quality in residential spaces has been major concern. In particular, the indoor air quality of residential facility before occupancy, which is related to the interior material, is a serious problem. existing research has mainly focused on pollution control after construction, but this research has derived I key performance index I about increasing air quality and priority of management with a controlling schedule. That is the objectives of research. The results show the relative priority of the four major items in wall‐based apartment buildings and in column‐based apartment buildings. An analysis of the parties responsible for improvement based on the IAQ results shows more efforts to improve IAQ are needed in material factories and engineering/design companies.

Core conferences bta 19 paper 3

Association of Scientists, Developers and Faculties

Exploring Revitalization Solutions: Engaging Community through Media Architecture Behzad Shojaedingivi1 1University of Tehran Abstract: This paper aims to investigate Media Architecture and its potentials for culturally based revitalization. Media Architecture presents a new approach based on Augmentation concepts, in which projects are designed and implemented adopting contemporary mediums in an aesthetic way in order to attract the presence of a more cultural audience and increase the participation of the local residents. Ultimately this will lead to an increase of interaction between different classes in neglected areas and strengthen their connection to their built environment. This is an interdisciplinary approach in which architecture and contemporary mediums are combined aesthetically with the aim of creating revival solutions in neglected areas. Criteria of Creating Social Interaction for Green Open Space in Karkh, Iraq Sarah Abdulkareem Salih1, Sumarni Ismail2 1Master Student, 2Lecturer, Department of Architecture, Universiti Putra Malaysia, Malaysia Abstract: This paper outlines the issue on open spaces, which led to decrease social interaction among residents in Baghdad city nowadays. The main objective of the paper is to identify the criteria of green open spaces to achieve sound social interaction in Baghdad city, Iraq. This paper employed quantitative method, in the form of survey, for data collection. Data were obtained from questionnaires, through the selection of 270 respondents in a single-stage random procedure from ten specific neighbourhoods in Karkh district. The study findings confirm that open spaces and parks is essential to enhance social interaction by implementing appropriate criteria in that open spaces or parks. The results of this study are useful reference for urban and landscape planners, architects, social psychologists, the Municipality of Baghdad, and researchers in this field.

Core conferences bta 19 paper 2

Association of Scientists, Developers and Faculties

The CoreConferences 2019 held on 20th – 21st March, 2019, in collaboration with Association of Scientists, Developers and Faculties (ASDF), an International body, at Taipei, Taiwan. CoreConferences 2019 provides a chance for Academic and Industry professionals to discuss the recent progress in the area of Multiple. The outcome of the conference will trigger for the further related research and future technological improvement. This conference highlights the novel concepts and improvements related to the research and technology.

CoreConferences Batch A 2019

Association of Scientists, Developers and Faculties

ICCOTWT 2018 will be the most comprehensive conference focused on the various aspects of Cloud of Things and Wearable Technologies. This Conference provides a chance for academic and industry professionals to discuss recent progress in the area of Cloud of Things and Wearable Technologies. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject. The goal of this conference is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of Cloud of Things and Wearable Technologies.

International Conference on Cloud of Things and Wearable Technologies 2018

Association of Scientists, Developers and Faculties

ICCELEM 2017

Association of Scientists, Developers and Faculties

ICSSCCET 2017

Association of Scientists, Developers and Faculties

ICAIET 2017

Association of Scientists, Developers and Faculties

ICICS 2017

Association of Scientists, Developers and Faculties

ICACIEM 2017

Association of Scientists, Developers and Faculties

Wireless sensor networks can provide low cost solution accompanied with limited storage, computational capability and power for verity of real-world problems and become essential factor when sensor nodes are arbitrarily deployed in a hostile environment. The cluster head selection technique is also one of the good approaches to reduce energy consumption in wireless sensor networks. The lifetime of wireless sensor networks is extended by using the uniform cluster head selection and balancing the network loading among the clusters. We have reviewed various energy efficient schemes apply in WSNs of which we concentrated on selection of cluster head approach and proposed an new method called Sleep Scheduling Routing with in clusters for Energy Efficient [SSREE]in which some nodes in clusters are usually put to sleep to conserve energy, and this helps to prolong the network lifetime. EASSR selects a node as a cluster head if its residual energy is more than system average energy and have less energy consumption rate in previous round. Then, an Performance analysis and compared statistic results of SSREE shows of the significant improvement over existing protocol LEACH, SEP and M-GEAR protocol in terms of lifetime of network and data units gathered at BS.

A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...

Association of Scientists, Developers and Faculties

Due to rapid urbanization the manufacturing processes of conventional building materials pollutes air, water and land. Hence in order to fulfil the increasing demand it is required to adopt a cost effective, eco-friendly technologies by improving the traditional techniques with the usage of available local materials. Agro – industrial and other solid waste disposal is another serious issue of concern in most of developing countries. The present paper explores the potential application of agro-waste as an ingredient for alternate sustainable construction materials.

Application of Agricultural Waste in Preparation of Sustainable Construction ...

Association of Scientists, Developers and Faculties

A correct node operation and power administration are significant issues in the wireless sensor network system. Ultrasonic, dead reckoning, and radio frequency information is obtained by using localization mechanism and worked through a specific filter algorithm. In this paper, a well-organized grid deployment method is applied to split the nodes into multiple individual grids. The tiny grids are used for improved resolution and bigger grids are used to decrease the complexity of processing. The efficiency of each grid is obtained by environmental factors such as redeployed nodes, boundaries, and obstacles. To decrease the power usage, asynchronous power management method is designed. In network communication, power management method is applied by using an asynchronous awakening scheme and n-duplicate coverage algorithm is engineered for the coverage of nodes.

Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...

Association of Scientists, Developers and Faculties

Customer satisfaction is the main problem prevailing now-a-days in all the Companies. Satisfying the customers is the big gain for any company. Marketing managers have to analyse the taste and preferences of the customers in order to satisfy their needs. The present study is to analyse the Customer Satisfaction with special reference to Ambal Auto Ltd, Erode. Questionnaire method was used to know the views and suggestions of the customers.

A Study on Customer Satisfaction towards Ambal Auto, Erode

Association of Scientists, Developers and Faculties

More from Association of Scientists, Developers and Faculties (20)

Core conferences bta 19 paper 12

Core conferences bta 19 paper 10

Core conferences bta 19 paper 8

Core conferences bta 19 paper 7

Core conferences bta 19 paper 6

Core conferences bta 19 paper 5

Core conferences bta 19 paper 4

Core conferences bta 19 paper 3

Core conferences bta 19 paper 2

CoreConferences Batch A 2019

International Conference on Cloud of Things and Wearable Technologies 2018

ICCELEM 2017

ICSSCCET 2017

ICAIET 2017

ICICS 2017

ICACIEM 2017

A Typical Sleep Scheduling Algorithm in Cluster Head Selection for Energy Eff...

Application of Agricultural Waste in Preparation of Sustainable Construction ...

Asynchronous Power Management Using Grid Deployment Method for Wireless Senso...

A Study on Customer Satisfaction towards Ambal Auto, Erode

Recently uploaded

NO1 Best Powerful Vashikaran Specialist Baba Vashikaran Specialist For Love V...

Amil baba

This simple Python software is designed to assist Civil and Geotechnical Engineers in performing site-specific seismic hazard assessments. The program calculates the seismic response spectrum based on user-provided geotechnical and seismic parameters, generating a comprehensive technical report that includes the response spectrum data and figures. The analysis adheres to Eurocode 8 and the Greek Annex, ensuring compliance with international standards for earthquake-resistant design.

Seismic Hazard Assessment Software in Python by Prof. Dr. Costas Sachpazis

Dr.Costas Sachpazis

Databricks Generative AI Fundamentals .pdf

VinayVadlagattu

Diploma Engineering Drawing Qp-2024 Ece .pdf

JNTUA

Passive Air Cooling System and Solar Water Heater.ppt

amrabdallah9

学校原版一模一样【微信：739014279】【(Griffith毕业证书)格里菲斯大学毕业证成绩单-学位证】【微信：739014279】可查留信认证（真实可查，永久存档）纸张工艺完全按照原版一比一制作/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。 ◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆ 【主营项目】一.毕业证【q微739014279】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微739014279】 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才 → 【关于价格问题（保证一手价格）我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子我给客户的都是第一手的代理价格，因为我想坦诚对待大家不想跟大家在价格方面浪费时间对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！学历顾问：QQ/微信739014279

一比一原版(Griffith毕业证书)格里菲斯大学毕业证成绩单学位证书

c3384a92eb32

Adsorption (mass transfer operations 2) ppt

jigup7320

UNIT 4 PTRP final Convergence in probability.pptx

kalpana413121

DBMS-Report on Student management system.pptx

rajjais1221

Signal Processing and Linear System Analysis

National Chung Hsing University

SLIDESHARE PPT-DECISION MAKING METHODS.pptx

CHAIRMAN M

In this short lecture, I explain the fundamentals of electromagnetic compatibility (EMC), the basic coupling model and coupling paths via cables, electric fields, magnetic fields and wave fields. We also look at electric vehicles as an example of systems with many conducted EMC problems due to power electronic devices such as rectifiers and inverters with non-linear components such as diodes and fast switching components such as MOSFETs or IGBTs. After a brief review of circuit analysis fundamentals and an experimental investigation of the frequency-dependent impedance of resistors, capacitors and inductors, we look at a simple low-pass filter. The transfer function is derived and measured.

Filters for Electromagnetic Compatibility Applications

Mathias Magdowski

At the forefront of technological innovation and scholarly discourse, the Journal of Electrical Systems (JES) is a peer-reviewed publication dedicated to advancing the understanding and application of electrical systems, communication systems and information science. With a commitment to excellence, we provide a platform for researchers, academics, and professionals to contribute to the ever-evolving field of electrical engineering, communication technology and Information Systems. The mission of JES is to foster the exchange of knowledge and ideas in electrical and communication systems, promoting cutting-edge research and facilitating discussions that drive progress in the field. We aim to be a beacon for those seeking to explore, challenge, and revolutionize the way we harness, distribute, and utilize electrical energy and information systems..

Call for Papers - Journal of Electrical Systems (JES), E-ISSN: 1112-5209, ind...

Christo Ananth

01-vogelsanger-stanag-4178-ed-2-the-new-nato-standard-for-nitrocellulose-test...

AshwaniAnuragi1

Basics of Relay for Engineering Students

kannan348865

handbook on reinforce concrete and detailing

AshishSingh1301

Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf

Er.Sonali Nasikkar

学校原件一模一样【微信：739014279】【(NEU毕业证书)东北大学毕业证成绩单-学位证】【微信：739014279】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。 ◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆ 【主营项目】一.毕业证【q微739014279】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微739014279】 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子我给客户的都是第一手的代理价格，因为我想坦诚对待大家不想跟大家在价格方面浪费时间对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！学历顾问：QQ/微信739014279

一比一原版(NEU毕业证书)东北大学毕业证成绩单原件一模一样

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

JNTUA

Raashid final report on Embedded Systems

RaashidFaiyazSheikh

Recently uploaded (20)

NO1 Best Powerful Vashikaran Specialist Baba Vashikaran Specialist For Love V...

Seismic Hazard Assessment Software in Python by Prof. Dr. Costas Sachpazis

Databricks Generative AI Fundamentals .pdf

Diploma Engineering Drawing Qp-2024 Ece .pdf

Passive Air Cooling System and Solar Water Heater.ppt

一比一原版(Griffith毕业证书)格里菲斯大学毕业证成绩单学位证书

Adsorption (mass transfer operations 2) ppt

UNIT 4 PTRP final Convergence in probability.pptx

DBMS-Report on Student management system.pptx

Signal Processing and Linear System Analysis

SLIDESHARE PPT-DECISION MAKING METHODS.pptx

Filters for Electromagnetic Compatibility Applications

Call for Papers - Journal of Electrical Systems (JES), E-ISSN: 1112-5209, ind...

01-vogelsanger-stanag-4178-ed-2-the-new-nato-standard-for-nitrocellulose-test...

Basics of Relay for Engineering Students

handbook on reinforce concrete and detailing

Instruct Nirmaana 24-Smart and Lean Construction Through Technology.pdf

一比一原版(NEU毕业证书)东北大学毕业证成绩单原件一模一样

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

Raashid final report on Embedded Systems

Failure Investigation on Armature Plate to Enhance Durability

1. International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 44 ` International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM087 eAID ICACIEM.2017.087 Failure Investigation on Armature Plate to Enhance Durability M Vigneshwaran1 , S Vijay PraveenKumar2 , M Yuvaraj3 , G P Yuvaraj Thirumalaivasan4 , J Anantharaj5 , R Aniruttha6 1,2,3,4,5,6 UG Students, Department of Mechanical Engineering, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: In this study, a failure component of armature plate is used in picanol loom. This armature plate is used to stop auto loom suddenly. In one side of armature plate clutch is fitted and another side brake. The main focuses of the project is fracture and wear analysis, one of the fractured armature plate is retrieved to identify the cause of failure. The investigations included the visual examination, chemical analysis, hardness, micro- structural characterization, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and wear measurement is carried out in order to determine the cause and solution of this failure. A failure investigation has been conducted on a picanol loom consisting of a drive clutch and brake. The armature plate is made from an EN 3 material. The first visual examination and chemical analysis is very must and after hardness and micro- structural characterization is applied. ISBN 978-81-933235-1-9 VOL 01 Website icaciem.org eMail icaciem@asdf.res.in Received 10 – January – 2017 Accepted 28 - January – 2017 Article ID ICACIEM088 eAID ICACIEM.2017.088 Smart Drip System Using for Agriculture System G JayaPrakash1 , M Appu Samy3 , M Sabari Nathan4 , S Sulthanbasha5 1,2,3,4,5 Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India Abstract: Agriculture is the back bone of India. To make the sustainable agriculture, this system is proposed. In this system ARM 9 processor is used to control and monitor the irrigation system. Different kinds of sensors are used. This paper presents a fully automated drip irrigation system which is controlled and monitored by using ARM9 processor.PH content and the nitrogen content of the soil are frequently monitored. For the purpose of monitoring and controlling, GSM module is implemented. The system informs user about any abnormal conditions like less moisture content and temperature rise, even concentration of CO2 via SMS through the GSM module. This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution. 2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]

Failure Investigation on Armature Plate to Enhance Durability

Recommended

Recommended

More Related Content

Similar to Failure Investigation on Armature Plate to Enhance Durability

Similar to Failure Investigation on Armature Plate to Enhance Durability (20)

More from Association of Scientists, Developers and Faculties

More from Association of Scientists, Developers and Faculties (20)

Recently uploaded

Recently uploaded (20)

Failure Investigation on Armature Plate to Enhance Durability