1. JOB TITLE: AUTOMOTIVE TECHNICIAN 1
DUTY NO.: 06 DUTY: PERFORM VEHICLE MANUAL DRIVE TRAIN REPAIR
TASK NO.: 06.05 TASK: Rectify propeller shaft assembly
LEVEL: 1 PERFORMANCE STANDARD: (Actions, Conditions, Criteria)
Rectify propeller shaft assembly using service manual, hand tools, special
tools, measuring tools, lubricant, and replacement parts so that propeller
shaft distinguished, propeller shaft removed and installed, and universal joint
examined are in accordance with the manufacturer s specifications.
SUB-TASKS/STEPS
ENABLING REQUIREMENTS
(Knowledge, Skill, Attitude and Safety)
TOOLS/EQUIPMENT/
MATERIALS
1. Distinguish
propeller shaft
location
2. Remove propeller
shaft
3. Examine propeller
shaft universal
joint
Knowledge on:
1.1 Types and function of propeller shaft
1.2 Construction and operation of propeller shaft
1.3 Layout of propeller shaft
Ability to:
1.1 Locate propeller shaft assembly
Knowledge on:
2.1 Procedures of removing propeller shaft
assembly
2.2 Centre support mounting
Ability to:
2.1 Dismantle propeller shaft assembly
2.2 Dismantle propeller shaft support mounting
2.3 Check the propeller shaft condition
2.4 Check the propeller shaft support mounting
condition
Knowledge on:
3.1 Function of universal joint
3.2 Construction and operation of universal joint
3.3 Procedures of dismantling and assembling
universal joint
1. service manual
2. hand tools
3. special tools
4. measuring tools
5. lubricant/grease
6. replacement parts
7. wheel stopper
8. personal protection
equipment
9. fender cover
2. 4. Install propeller
shaft
Ability to:
3.1 Dismantle universal joint
3.2 Check condition of universal joint
3.3 Lubricate universal joint bearings
3.4 Assemble universal joint
Knowledge on:
4.1 Propeller shaft alignment
4.2 Procedures of fixing propeller shaft
Ability to:
4.1 Fix propeller shaft support bearing
4.2 Fix propeller shaft assembly
Attitude/Safety:
· Use wheel stopper
· Use personal protection equipment