1. JOB TITLE: AUTOMOTIVE TECHNICIAN 1
DUTY NO.: 07 DUTY: PERFORM VEHICLE BRAKE SYSTEM
TASK NO.: 07.07 TASK: Rectify brake calipers
LEVEL: 1 PERFORMANCE STANDARD: (Actions, Conditions, Criteria
Rectify brake calipers using service manual, hand tools, special tools,
measuring tools, and replacement parts so that brake calipers distinguished,
removed and installed; brake caliper components examined; and hydraulic
brake system bled are in accordance with the manufacturer s specifications.
SUB-TASKS/STEPS
ENABLING REQUIREMENTS
(Knowledge, Skill, Attitude and Safety)
TOOLS/EQUIPMENT/
MATERIALS
1. Distinguish vehicle
brake calipers
2. Remove vehicle
brake calipers unit
3. Examine vehicle
brake caliper
components
Knowledge on:
1.1 Types and function of brake caliper
1.2 Construction and operation of brake caliper
components
Ability to:
1.1 Locate components of brake caliper
Knowledge on:
2.1 Layout of brake caliper components
2.2 Procedures of detaching brake calipers unit
2.3 Procedures of inspecting brake calipers
Ability to:
2.1 Detach brake calipers unit
2.2 Check brake calipers condition
Knowledge on:
3.1 Dismantle brake caliper
3.2 Procedures of inspecting brake caliper
components
Ability to:
3.1 Dismantle brake caliper
3.2 Check the wear limits of brake caliper
components
3.3 Check brake caliper condition
3.4 Change brake caliper repair kit
3.5 Assemble brake caliper
1. service manual
2. hand tools
3. special tools
4. measuring tools
5. replacement parts
6. wheel stopper
7. safety stands
8. personal protection
equipment
9. fender cover

2. 4. Install vehicle
brake calipers unit
5. Bleed hydraulic
brake system
Knowledge on:
4.1 Procedures of fixing brake caliper
Ability to:
4.1 Fix vehicle brake caliper
Knowledge on:
5.1 Types of brake fluid
5.2 Bleeding procedures
Ability to:
5.1 Eliminate air from hydraulic brake system
5.2 Operate bleeding equipment
5.3 Adjust brake pedal free play
5.4 Test brake function ability
Attitude/Safety:
· Use personal protection equipment
· Use safety stands
· Use wheel stopper
· Use fender cover