This document outlines the tasks and requirements for an automotive technician to rectify a steering knuckle assembly. The technician must distinguish, remove, and install the steering knuckle in accordance with the manufacturer's specifications using various tools and following safety procedures. Specifically, the technician must identify steering knuckle components, detach the knuckle, inspect its condition, and properly fix it back in place. Knowledge of steering systems and repair procedures is required along with the ability to locate parts and correctly fix the knuckle.
1. JOB TITLE: AUTOMOTIVE TECHNICIAN 1
DUTY NO.: 08 DUTY: PERFORM VEHICLE STEERING SYSTEM REPAIR
TASK NO.: 08.02 TASK: Rectify steering knuckle assembly
LEVEL: 1 PERFORMANCE STANDARD: (Actions, Conditions, Criteria)
Rectify steering knuckle assembly using service manual, hand tools, special
tools, measuring tools, and replacement parts so that steering knuckle
distinguished, removed, and installed is in accordance with the
manufacturer s specifications.
SUB-TASKS/STEPS
ENABLING REQUIREMENTS
(Knowledge, Skill, Attitude and Safety)
TOOLS/EQUIPMENT/
MATERIALS
1. Distinguish
steering knuckle
components
2. Remove steering
knuckle
3. Install steering
knuckle
Knowledge on:
1.1 Purposes of steering system
1.2 Types and function of steering system
1.3 Construction and operation of steering
system
1.4 Function of steering knuckle
Ability to:
1.1 Locate steering knuckle components
Knowledge on:
2.1 Procedures of removing steering knuckle
2.2 Procedures of inspecting steering knuckle
Ability to:
2.1 Detach steering knuckle
2.2 Check condition of steering knuckle
Knowledge on:
3.1 Procedures of fixing steering knuckle
3.2 Techniques of fixing steering knuckle
Ability to:
3.1 Fix steering knuckle
Attitude/Safety:
· Use personal protection equipment
· Use safety stands
· Use wheel stopper
· Use fender cover
1. service manual
2. hand tools
3. special tools
4. measuring tools
5. lubricant/grease
6. replacement parts
7. wheel stopper
8. safety stands
9. personal protection
equipment
10. fender cover