this is a training report PPt for presentation to help the students.

2. Introduction 10/31/11

4. Overview of NTPC

5. NTPC Badarpur

8. Basic Principle There are basically three main units of a thermal power plant: 1. Steam Generator or Boiler 2. Steam Turbine 3. Electric Generator

9. Electricity from Coal

10. C&I LABS Control and Instrumentation Department has following labs: 1. Manometry Lab 2. Protection and Interlocks Lab 3. Automation Lab 4. Electronics Lab 5. Water Treatment Plant 6. Furnaces Safety Supervisory System Lab

11. OPERATION AND MAINTAINANCE This control & instrumentation is the brain of the plant because from the relays to transmitters followed by the electronic computation chipsets and recorders and lastly the controlling circuitry, all fall under this. A View of Control Room at BTPS

12. CONTROL & MONITORING MECHANISMS There are basically two types of Problems faced in a Power Plant 1. Metallurgical 2. Mechanical

13. C&I Lab In C&I Lab parameters to be monitored are: 1. Speed 2. Temperature 3. Current 4. Voltage 5. Pressure 6. Flow of Gases 7. Vibration

21. Awards

22. Awards

25. BTPS received golden peacock award for IT innovations for 2003-04