assembly mips subroutineSolutionassembly mips subroutine.pdf

•

0 likes•2 views

anjanacottonmills

assembly mips subroutine Solution assembly mips subroutine.

Education

More from anjanacottonmills

E= 0.28V reactants are favored .pdf

anjanacottonmills

The differences between ipv4 and ipv6 are as below 1. Header: 1.Checksum and options feild are present and the length of header with 20 bytes in ipv4. 2.extension header is present with length 40 bytes in ipv6. 2.Addressing scheme: 1. A 32-bit permiting a amont of 2^32 in ipv4. 2. The adress of ipv6 is 128 bit. 3.Translation: Ipv4 is using 4 bytes and ipv6 is is utilizing 16 bytes to transit from ipv4 to ipv6. 4.Data flow: The ipv4 is unable to recognise packet flow for QOS handling.In ipv6 flow label is present to describe packet flow for QOS handling. 5.Duplicate adress detection: in ipv4 ARP is used to detect the duplicate adress and in ipv6 SLAAC +DHPCPV6 is used. 6.Multicast and routing: ipv6 is healthier in multicast routing when compared to ipv6.in ipv4 with TCP protocol is about 576 bytes.where as in ipv6 with 120 bytes. 7.current status of ipv6 adoption: Gooogle dignified ipv6 adoption at arriving 10% positioning spot. Solution The differences between ipv4 and ipv6 are as below 1. Header: 1.Checksum and options feild are present and the length of header with 20 bytes in ipv4. 2.extension header is present with length 40 bytes in ipv6. 2.Addressing scheme: 1. A 32-bit permiting a amont of 2^32 in ipv4. 2. The adress of ipv6 is 128 bit. 3.Translation: Ipv4 is using 4 bytes and ipv6 is is utilizing 16 bytes to transit from ipv4 to ipv6. 4.Data flow: The ipv4 is unable to recognise packet flow for QOS handling.In ipv6 flow label is present to describe packet flow for QOS handling. 5.Duplicate adress detection: in ipv4 ARP is used to detect the duplicate adress and in ipv6 SLAAC +DHPCPV6 is used. 6.Multicast and routing: ipv6 is healthier in multicast routing when compared to ipv6.in ipv4 with TCP protocol is about 576 bytes.where as in ipv6 with 120 bytes. 7.current status of ipv6 adoption: Gooogle dignified ipv6 adoption at arriving 10% positioning spot..

The differences between ipv4 and ipv6 are as below1. Header1.Ch.pdf

anjanacottonmills

TCP - TCP breaks data into manageable packets and tracks information such as source and destination of packets. It is able to reroute packets and is responsible for guaranteed delivery of the data. IP - This is a connectionless protocol, which means that a session is not created before sending data. IP is responsible for addressing and routing of packets between computers. It does not guarantee delivery and does not give acknowledgement of packets that are lost or sent out of order as this is the responsibility of higher layer protocols such as TCP. UDP - A connectionless, datagram service that provides an unreliable, best-effort delivery. ICMP - Internet Control Message Protocol enables systems on a TCP/IP network to share status and error information such as with the use of PING and TRACERT utilities. SMTP - Used to reliably send and receive mail over the Internet. FTP - File transfer protocol is used for transferring files between remote systems. Must resolve host name to IP address to establish communication. It is connection oriented (i.e. verifies that packets reach destination). TFTP - Same as FTP but not connection oriented. ARP - provides IP-address to MAC address resolution for IP packets. A MAC address is your computer\'s unique hardware number and appears in the form 00-A0-F1-27-64-E1 (for example). Each computer stores an ARP cache of other computers ARP-IP combinations. POP3 - Post Office Protocol. A POP3 mail server holds mail until the workstation is ready to receive it. IMAP - Like POP3, Internet Message Access Protocol is a standard protocol for accessing e- mail from your local server. IMAP (the latest version is IMAP4) is a client/server protocol in which e-mail is received and held for you by your Internet server. TELNET - Provides a virtual terminal or remote login across the network that is connection- based. The remote server must be running a Telnet service for clients to connect. HTTP - The Hypertext Transfer Protocol is the set of rules for exchanging files (text, graphic images, sound, video, and other multimedia files) on the World Wide Web. It is the protocol controlling the transfer and addressing of HTTP requests and responses. HTTPS - Signifies that a web page is using the Secure Sockets Layer (SSL) protocol and is providing a secure connection. This is used for secure internet business transactions. NTP - Network Time Protocol is a protocol that is used to synchronize computer clock times in a network of computers. SNMP - Stands for Simple Network Management Protocol and is used for monitoring and status information on a network. SNMP can be used to monitor any device that is SNMP capable and this can include computers, printers, routers, servers, gateways and many more using agents on the target systems. The agents report information back to the management systems by the use of “traps” which capture snapshot data of the system. This trap information could be system errors, resource information, or other info.

TCP - TCP breaks data into manageable packets and tracks information.pdf

anjanacottonmills

Static arrays are structures whose size is fixed at compile time and therefore cannot be extended or reduced to fit the data set. A dynamic array can be extended by doubling the size but there is overhead associated with the operation of copying old data and freeing the memory associated with the old data structure. One potential problem of using arrays for storing data is that arrays require a contiguous block of memory which may not be available, if the requested contiguous block is too large. However the advantages of using arrays are that each element in the array can be accessed very efficiently using an index. However, for applications that can be better managed without using contiguous memory we define a concept called “linked lists”. A linked list is a collection of objects linked together by references from one object to another object. By convention these objects are named as nodes. So the basic linked list is collection of nodes where each node contains one or more data fields AND a reference to the next node. The last node points to a NULL reference to indicate the end of the list. Types of Linked Lists Linked lists are widely used in many applications because of the flexibility it provides. Unlike arrays that are dynamically assigned, linked lists do not require memory from a contiguous block. This makes it very appealing to store data in a linked list, when the data set is large or device (eg: PDA) has limited memory. One of the disadvantages of linked lists is that they are not random accessed like arrays. To find information in a linked list one must start from the head of the list and traverse the list sequentially until it finds (or not find) the node. Another advantage of linked lists over arrays is that when a node is inserted or deleted, there is no need to “adjust” the array. There are few different types of linked lists. A singly linked list as described above provides access to the list from the head node. Traversal is allowed only one way and there is no going back. A doubly linked list is a list that has two references, one to the next node and another to previous node. Doubly linked list also starts from head node, but provide access both ways. That is one can traverse forward or backward from any node. A multilinked list (see figures 1 & 2) is a more general linked list with multiple links from nodes. For examples, we can define a Node that has two references, age pointer and a name pointer. With this structure it is possible to maintain a single list, where if we follow the name pointer we can traverse the list in alphabetical order of names and if we traverse the age pointer, we can traverse the list sorted by ages. This type of node organization may be useful for maintaining a customer list in a bank where same list can be traversed in any order (name, age, or any other criteria) based on the need. Designing the Node of a Linked List Linked list is a collection of linked nodes. A node is a struct with at least a.

Static arrays are structures whose size is fixed at compile time and.pdf

anjanacottonmills

D) II, III, IV, and V only .pdf

anjanacottonmills

NumberList.java (implements the linked list) public class NumberList{ Node first; Node last; public NumberList(){ first = null; last = null; } public NumberList(Node node){ this.first = node; this.last = node; } public boolean isEmpty(){ return first == null; } public void setLast(Node node){ this.last = node; } public void insert(Node node){ if (first==null){ this.first = node; this.last = node; } else{ node.previous = this.last; node.previous.next = node; node.next = null; this.last = node; } } public boolean inList(String num){ Node l = first; while (l.next != null){ if (l.number.equals(num)){ return true; } else{ l = l.next; } } return false; } public void printList(){ Node l = first; while(l.next!=null){ System.out.print(l.number+\" \"); l = l.next; } System.out.println(); } } Node.java (implements a single node in the linked list; stores number and pointers) public class Node{ String number; Node previous; Node next; public Node(String num){ number = num; previous = null; next = null; } public Node(String num, Node p, Node n){ number = num; previous = p; next = n; } } Main.java (contains the main method and the helper methods to solve the questions given) import java.util.Scanner; import java.util.List; import java.util.ArrayList; public class Main{ static boolean checkHappiness(String num){ Node current = new Node(num, null, null); NumberList numberList = new NumberList(current); int len = num.length(); int resultant = 0; for (int i=0; i happyNumbersfrom1to10000(){ ArrayList numbers = new ArrayList(); for (int j=0; j<10000; j++){ if (checkHappiness(String.valueOf(j+1))){ numbers.add(String.valueOf(j+1)); } } return numbers; } static void happyNumbersfrom9001to10000(){ for (int j=9001; j<=10000; j++){ //System.out.println(j); if (checkHappiness(String.valueOf(j))){ System.out.println(String.valueOf(j)); } } } static String getLargeHappyNumber(){ for (long i=10000000000000000000L; i<1000000000000000000000L; i++){ if (checkHappiness(String.valueOf(i))){ return String.valueOf(i); } return \"-1\"; } } static String getLargeUnhappyNumber(){ for (long i=10000000000000000000L; i<1000000000000000000000L; i++){ if (!checkHappiness(String.valueOf(i))){ return String.valueOf(i); } return \"-1\"; } } public static void main(String[] args){ happyNumbersfrom9001to10000(); System.out.println(happyNumbersfrom1to10000()); } } Solution NumberList.java (implements the linked list) public class NumberList{ Node first; Node last; public NumberList(){ first = null; last = null; } public NumberList(Node node){ this.first = node; this.last = node; } public boolean isEmpty(){ return first == null; } public void setLast(Node node){ this.last = node; } public void insert(Node node){ if (first==null){ this.first = node; this.last = node; } else{ node.previous = this.last; node.previous.next = node; node.next = null; this.last = node; } } public boolean inList(String num){ Node l = first; while (l.next != null){ if (l.number.equals(num)){ return true; } else{ l = l.

NumberList.java (implements the linked list)public class NumberLis.pdf

anjanacottonmills

c) H2(g) + 12 O2(g) -H2O (l) as all are in the.pdf

anjanacottonmills

MagicSquareTest.java import java.util.Scanner; public class MagicSquareTest { /** * @param args */ public static void main(String[] args) { // TODO Auto-generated method stub Scanner scan = new Scanner(System.in); System.out.println(\"Enter Number of rows:\"); int rows = scan.nextInt(); System.out.println(\"Enter Nummber of columns:\"); int cols = scan.nextInt(); int a[][] = new int[rows][cols]; System.out.println(\"Enter matrix elements;\"); for(int i=0; i Solution MagicSquareTest.java import java.util.Scanner; public class MagicSquareTest { /** * @param args */ public static void main(String[] args) { // TODO Auto-generated method stub Scanner scan = new Scanner(System.in); System.out.println(\"Enter Number of rows:\"); int rows = scan.nextInt(); System.out.println(\"Enter Nummber of columns:\"); int cols = scan.nextInt(); int a[][] = new int[rows][cols]; System.out.println(\"Enter matrix elements;\"); for(int i=0; i.

MagicSquareTest.java import java.util.Scanner;public class Mag.pdf

anjanacottonmills

Interphase. This is the phase where the cell prepares for the next round of division. It has three phases further, Gap1, synthesis, and gap 2. During Gap1, the cell acquired nutrients and increases in size. The checkpoints ensure that the cell is normal and all the things necessary for DNA synthesis are prepared. During synthesis phase, DNA replicates. During the Gap 2 phase, the cell grow further and the checkpoints ensure that the cell is correctly prepared for mitosis phase. The cell spends most of its time in G1 phase, followed by S phase. Remaining phases comprise only very short period of the cell cycle. Solution Interphase. This is the phase where the cell prepares for the next round of division. It has three phases further, Gap1, synthesis, and gap 2. During Gap1, the cell acquired nutrients and increases in size. The checkpoints ensure that the cell is normal and all the things necessary for DNA synthesis are prepared. During synthesis phase, DNA replicates. During the Gap 2 phase, the cell grow further and the checkpoints ensure that the cell is correctly prepared for mitosis phase. The cell spends most of its time in G1 phase, followed by S phase. Remaining phases comprise only very short period of the cell cycle..

Interphase.This is the phase where the cell prepares for the next .pdf

anjanacottonmills

B.the rotation will be zero as L and D will cance.pdf

anjanacottonmills

In the above conversation it is belonging to stereotypes. Stereotypes are a form of generalization. When we generalize, we group or classify people, places, or things according to the traits they have in common. For example, we may say most Masai tribesmen are unusually tall or Scandinavians are usually fair-skinned. If our observations are careless or too limited, the generalization may be faulty, as when someone says, \"Hollywood hasn\'t produced any quality movies in the past fifteen years.\" But stereotypes are more serious than mere faulty generalizations. They are fixed, unbending generalizations about people, places, or things. When a stereotype is challenged, the person who holds it is unlikely to modify or discard it, because it is based on a distortion of perception. As Walter Lippmann explains, when we stereotype,\" we do not so much see this man and that sunset; rather we notice that the thing is man or sunset, and then see chiefly what our mind is full of on those subjects.\"75 The most common kinds of stereotyping are ethnic and religious. Jews are shrewd and cunning, clannish, have a financial genius matched only by their greed. Italians are hot-tempered, coarse, and sensual. The Irish, like the Poles, are big and stupid; in addition, they brawl, lust after heavy liquor and light conversation. Blacks are primitive and slowwitted. (Often each of these stereotypes includes a virtue or two – Jews are good family members, Italians artistic, Poles brave, the Irish devout, blacks athletic.) Beyond these stereotypes are numerous other, less common ones; Swedish women, foreign film directors, Southern senators, physical education instructors, fundamentalist clergymen, agnostics, atheists, democrats, republicans, Mexicans, scientist, prostitutes, politicians, English teachers, psychiatrists, construction workers, black militants, college dropouts, homosexuals, and society matrons. There are stereotypes of institutions as well: marriage, the church, government, the military, the Founding Fathers, Western culture, the Judeo-Christian tradition. (A full list would include even God and mother.) FACTS DON\'T MATTER It is pleasant to assume that when the facts are known, stereotypes disappear. However, that is seldom the case. The late Harvard psychologist Gordon Allport, in The nature of Prejudice, pointed out that \"it is possible for a stereotype to grow in defiance of all evidence…\"76 People who stereotype don\'t dust accept the facts that are offered to them. They measure those facts against what they already \"know.\" That is, they measure them against the stereotype itself. Instead of seeing that the stereotype is false and therefore dismissing it, they reject the unfamiliar facts. People who think in terms of stereotypes tend to be selective in their perceptions. They reject conditions that challenge their preformed judgment and retain those that reinforce it. Thus a person can notice the Jewish employer promoting another Jew but ign.

In the above conversation it is belonging to stereotypes.Stereotyp.pdf

anjanacottonmills

In general, the objective of an audit is to assess the risk of material misstatements in the financial statements. Material misstatements can arise from inadequacies in internal controls and from inaccurate management assertions. Thus, testing the validity of the various implicit managerial assertions is a key objective of an auditor. Existence and Completeness Auditing standards require that auditors test basic underlying management assertions implicit in the financial statements. Key among these various assertions are existence or occurrence, which describe a singular concept: Journal entries are not fiction. As the name implies, an auditor will conduct various procedures to verify that assets do in fact exist and that recorded transactions did in fact occur. Additionally, an auditor will seek evidence of completeness, so that the financial statements include all material transactions that occurred, and so the records do not omit material transactions for any reason. Rights and Obligations The various rights and obligations of the company are important management assertions inherent in the financial statements. Thus, an auditor will obtain evidence regarding a company\'s rights, such as proper title to assets and status of intellectual property. An auditor will be concerned with assertions relating to the company\'s obligations, such as accounts payable balances, long- term debts and tax liabilities. Thus, the audit objectives will be fulfilled upon validating these specific assertions. Valuation or Allocation Valuation or allocation are managerial assertions which are often material to the financial statements; thus, an auditor will diligently conduct audit procedures relating to these objectives. Generally accepted accounting principles, or GAAP, require that certain balance sheet items be presented using different valuation methodologies. Meeting these standards is a key audit objective, as the risk of material misstatement is low in probability, but high in magnitude. Thus, among other things, the historical cost of assets is verified, depreciation methods are scrutinized and the fair value of investments are calculated to satisfy this objective. Presentation and Disclosure Another specific audit objective is validating the presentation of the financial statements and the adequacy of the disclosures therein. Financial statements should conform to certain requirements and expectations, and should include the balance sheet, income statement, statement of cash flows and the statement of owner\'s equity. Relating to disclosure, the auditor will consider the sufficiency and clarity of footnotes and the transparency in management discussion and analysis, so he can assess the risk of material misstatement and fulfill the audit objective. Specific audit objectives are the application of the general audit objectives to a given class of transactions, account balance, or presentation and disclosure. There must be at least one specific audit object.

In general, the objective of an audit is to assess the risk of mater.pdf

anjanacottonmills

if one can understand a few things it is easier to solve these kind of questions. first comes to I which codes for repressor. there are 3 types - I+ Wild type and is normal and make Z and Y products in the presence of lactose only. I- is a recessive mutation will make products of Z and Y in the presence and the absence of lactose. Is is a dominant mutation will stop both the products Z and Y. if you have atlease one Is in the question neither the products will from no matter whether the lactose is presence or not. then comes to Operator (O) ,O+ is a wild type and can produce both the products of Z and Y. in the presence of lactose.and Oc is the mutation and can produce both Z and Y products in the Presence and even in the absence of lactose. next comes to Z+ represents production of -galactosidase and Z- represents no production of - galactosidase. 1.Ans. I+P-O+Z+Y+ In this haploid genotype the transcription of operon genes totally absent. Transcription of structural genes is not occured. because here P- indicates the mutation in the promoter site, the RNA polymerase unable to bind to the Promoter and initiate transcription of structural genes. so these cells cannot able to grow on media which contain lactose as sole carbon source. the Strain is lac- 2.Ans.I+P+OcZ+Y- here Oc is the mutation and can produce both Z and Y products in the Presence and even in the absence of lactose means constitutively. but here only the product beta galctosidase produced constitutively and the permease is not produced because Permease gene is is mutated (Y-). these cells also cannot able to grow on media which contain lactose as sole carbon source.because the absence of functional permease enzyme so the Strain is lac- 3.Ans. I-P+OcZ+Y+ here I- is a recessive mutation will make products of Z and Y in the presence and the absence of lactose and Oc is the mutation and can produce both Z and Y products in the Presence and even in the absence of lactose. so this haploid genotype transcribes operon genes constitutively. and both the products of Z and Y expressed continuously, so these cells able to grow on the media which contain lactose as sole carbon source. the strain is lac+ b. partially diploid cap-I+P+O+Z-Y+/Cap+I-P+O+Z+Y- these cells can able to grow on lactose medium because these cells have presence of wild promoter which can able to active the transcription of structural genes. so these cells can able to grow on the media which contain lactose as sole carbon source. ii. Transcription of beta-galactosidase and permease is Inducible though diploid cell have mutated inducer region which can able to activate constitutive expression but Wild type (I+) is dominant over I- . so it is inducible operon. Solution if one can understand a few things it is easier to solve these kind of questions. first comes to I which codes for repressor. there are 3 types - I+ Wild type and is normal and make Z and Y products in the presence of lactose only. I- is a recessive mutation .

if one can understand a few things it is easier to solve these kind .pdf

anjanacottonmills

I think it is H2SiO4 not H4SiO4, since it exceeds itsvalancy Balanced MolecularEquation is : CuCl2 +H2SiO4 ---> CuSiO4 (s) +2HCl Total ionic Equation is : Cu2+ +2 Cl - + 2H+ +SO42- ---> CuSiO4 +2H+ + 2Cl- Spectator ions are : Cl - &H+ Spectator ions are : Cl - &H+ Net ionic Equation is : Cu2+ + SO42- --->CuSiO4 Solution I think it is H2SiO4 not H4SiO4, since it exceeds itsvalancy Balanced MolecularEquation is : CuCl2 +H2SiO4 ---> CuSiO4 (s) +2HCl Total ionic Equation is : Cu2+ +2 Cl - + 2H+ +SO42- ---> CuSiO4 +2H+ + 2Cl- Spectator ions are : Cl - &H+ Spectator ions are : Cl - &H+ Net ionic Equation is : Cu2+ + SO42- --->CuSiO4.

I think it is H2SiO4 not H4SiO4, since it exceeds itsvalancyBalanc.pdf

anjanacottonmills

fixed 3 issues. I am working on remaining.package chegg;public c.pdf

anjanacottonmills

class Mesh{ public: /*Mesh data*? vectorvertices; vector indices; vectortextures; ?*functions*? Mesh(vectorvertices,vectorindices,vector textures); void draw(shader shader); private: /* Render data*/ gluint vao,vbo,ebo; /* functions */ void setupmesh(); }; Solution class Mesh{ public: /*Mesh data*? vectorvertices; vector indices; vectortextures; ?*functions*? Mesh(vectorvertices,vectorindices,vector textures); void draw(shader shader); private: /* Render data*/ gluint vao,vbo,ebo; /* functions */ void setupmesh(); };.

class Mesh{publicMesh datavectorvertexvertices;vector.pdf

anjanacottonmills

Bacteria was used in transformation experiment, to prove Dna was the genetic material and replicated semi conservatively, used in gene expression and regulation, preferred host for cloning genes, and in manipulation of DNA Solution Bacteria was used in transformation experiment, to prove Dna was the genetic material and replicated semi conservatively, used in gene expression and regulation, preferred host for cloning genes, and in manipulation of DNA.

Bacteria was used in transformation experiment, to prove Dna was the.pdf

anjanacottonmills

c) 11Solutionc) 11.pdf

anjanacottonmills

1. Tyrosinase is involved in the synthesis of Melanin pigment in mam.pdf

anjanacottonmills

1) A covalent crystal differs from an ionic crystal in that a)on.pdf

anjanacottonmills

More from anjanacottonmills (20)

E= 0.28V reactants are favored .pdf

The differences between ipv4 and ipv6 are as below1. Header1.Ch.pdf

TCP - TCP breaks data into manageable packets and tracks information.pdf

Static arrays are structures whose size is fixed at compile time and.pdf

D) II, III, IV, and V only .pdf

NumberList.java (implements the linked list)public class NumberLis.pdf

c) H2(g) + 12 O2(g) -H2O (l) as all are in the.pdf

MagicSquareTest.java import java.util.Scanner;public class Mag.pdf

Interphase.This is the phase where the cell prepares for the next .pdf

B.the rotation will be zero as L and D will cance.pdf

In the above conversation it is belonging to stereotypes.Stereotyp.pdf

In general, the objective of an audit is to assess the risk of mater.pdf

if one can understand a few things it is easier to solve these kind .pdf

I think it is H2SiO4 not H4SiO4, since it exceeds itsvalancyBalanc.pdf

fixed 3 issues. I am working on remaining.package chegg;public c.pdf

class Mesh{publicMesh datavectorvertexvertices;vector.pdf

Bacteria was used in transformation experiment, to prove Dna was the.pdf

c) 11Solutionc) 11.pdf

1. Tyrosinase is involved in the synthesis of Melanin pigment in mam.pdf

1) A covalent crystal differs from an ionic crystal in that a)on.pdf

Recently uploaded

TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...

Nguyen Thanh Tu Collection

Sociology 101 Demonstration of Learning Exhibit

jbellavia9

Unit 3 Emotional Intelligence and Spiritual Intelligence.pdf

Dr Vijay Vishwakarma

How to Manage Global Discount in Odoo 17 POS

Celine George

𝐋𝐞𝐬𝐬𝐨𝐧 𝐎𝐮𝐭𝐜𝐨𝐦𝐞𝐬: -Discern accommodations and modifications within inclusive classroom environments, distinguishing between their respective roles and applications. -Through critical analysis of hypothetical scenarios, learners will adeptly select appropriate accommodations and modifications, honing their ability to foster an inclusive learning environment for students with disabilities or unique challenges.

Understanding Accommodations and Modifications

MJDuyan

ICT Role in 21st Century Education & its Challenges.pptx

AreebaZafar22

Salient Features of India constitution especially power and functions

KarakKing

Klinik_ Apotek Onlin 085657271886 Solusi Menggugurkan Masalah Kehamilan Anda Jual Obat Aborsi Asli KLINIK ABORSI TERPEECAYA _ Jual Obat Aborsi Cytotec Misoprostol Asli 100% Ampuh Hanya 3 Jam Langsung Gugur || OBAT PENGGUGUR KANDUNGAN AMPUH MANJUR OBAT ABORSI OLINE" APOTIK Jual Obat Cytotec, Gastrul, Gynecoside Asli Ampuh. JUAL ” Obat Aborsi Tuntas | Obat Aborsi Manjur | Obat Aborsi Ampuh | Obat Penggugur Janin | Obat Pencegah Kehamilan | Obat Pelancar Haid | Obat terlambat Bulan | Ciri Obat Aborsi Asli | Obat Telat Bulan | Pil Aborsi Asli | Cara Menggugurkan Konten | Cara Aborsi Tuntas | Harga Obat Aborsi Asli | Pil Aborsi | Jual Obat Aborsi Cytotec | Cara Aborsi Sendiri | Cara Aborsi Usia 1 Bulan | Cara Aborsi Usia 2 Tahun | Cara Aborsi Usia 3 Bulan | Obat Aborsi Usia 4 Bulan | Cara Abrasi Usia 5 Bulan | Cara Menggugurkan Konten | Kandungan Obat Penggugur | Cara Menghitung Usia Konten | Cara Mengatasi Terlambat Bulan | Penjual Obat Aborsi Asli | Obat Aborsi Garansi | Kandungan Obat Peluntur | Obat Telat Datang Bulan | Obat Telat Haid | Obat Aborsi Paling Murah | Klinik Jual Obat Aborsi | Jual Pil Cytotec | Apotik Jual Obat Aborsi | Kandungan Dokter Abrasi | Cara Aborsi Cepat | Jual Obat Aborsi Bergaransi | Jual Obat Cytotec Asli | Obat Aborsi Aman Manjur | Obat Misoprostol Cytotec Asli. "APA ITU ABORSI" “Aborsi Adalah dengan membendung hormon yang di perlukan untuk mempertahankan kehamilan yaitu hormon progesteron, karena hormon ini dibendung, maka jalur kehamilan mulai membuka dan leher rahim menjadi melunak,sehingga mengeluarkan darah yang merupakan tanda bahwa obat telah bekerja || maksimal 1 jam obat diminum || PENJELASAN OBAT ABORSI USIA 1 _7 BULAN Pada usia kandungan ini, pasien akan merasakan sakit yang sedikit tidak berlebihan || sekitar 1 jam ||. namun hanya akan terjadi pada saatdarah keluar merupakan pertanda menstruasi. Hal ini dikarenakan pada usiakandungan 3 bulan,janin sudah terbentuk sebesar kepalan tangan orang dewasa. Cara kerja obat aborsi : JUAL OBAT ABORSI AMPUH dosis 3 bulan secara umum sama dengan cara kerja || DOSIS OBAT ABORSI 2 bulan”, hanya berbedanya selain mengisolasijanin juga menghancurkan janin dengan formula methotrexate dikandungdidalamnya. Formula methotrexate ini sangat ampuh untuk menghancurkan janinmenjadi serpihan-serpihan kecil akan sangat berguna pada saat dikeluarkan nanti. APA ALASAN WANITA MELAKUKAN ABORSI? Aborsi di lakukan wanita hamil baik yang sudah menikah maupun belum menikah dengan berbagai alasan , akan tetapi alasan yang utama adalah alasan-alasan non medis (termasuk aborsi sendiri / di sengaja/ buatan] MELAYANI PEMESANAN OBAT ABORSI SETIAP HARI, SIAP KIRIM KESELURUH KOTA BESAR DI INDONESIA DAN LUAR NEGERI. HUBUNGI PEMESANAN LEBIH NYAMAN VIA WA/: 085657271886

Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...

ZurliaSoop

Application orientated numerical on hev.ppt

RamjanShidvankar

Key note speaker Neum_Admir Softic_ENG.pdf

Admir Softic

ICT role in 21st century education and it's challenges.

MaryamAhmad92

Micro-Scholarship, What it is, How can it help me.pdf

Poh-Sun Goh

UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf

Nirmal Dwivedi

Wellbeing inclusion and digital dystopias.pptx

Jisc

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

Amil baba

This PowerPoint helps students to consider the concept of infinity.

christianmathematics

On_Translating_a_Tamil_Poem_by_A_K_Ramanujan.pptx

Pooja Bhuva

SOC 101 Demonstration of Learning Presentation

camerronhm

Holdier Curriculum Vitae (April 2024).pdf

agholdier

Exploring_the_Narrative_Style_of_Amitav_Ghoshs_Gun_Island.pptx

Pooja Bhuva

Recently uploaded (20)

TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...

Sociology 101 Demonstration of Learning Exhibit

Unit 3 Emotional Intelligence and Spiritual Intelligence.pdf

How to Manage Global Discount in Odoo 17 POS

Understanding Accommodations and Modifications

ICT Role in 21st Century Education & its Challenges.pptx

Salient Features of India constitution especially power and functions

Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...

Application orientated numerical on hev.ppt

Key note speaker Neum_Admir Softic_ENG.pdf

ICT role in 21st century education and it's challenges.

Micro-Scholarship, What it is, How can it help me.pdf

UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf

Wellbeing inclusion and digital dystopias.pptx

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

This PowerPoint helps students to consider the concept of infinity.

On_Translating_a_Tamil_Poem_by_A_K_Ramanujan.pptx

SOC 101 Demonstration of Learning Presentation

Holdier Curriculum Vitae (April 2024).pdf

Exploring_the_Narrative_Style_of_Amitav_Ghoshs_Gun_Island.pptx