3. THINGS
We had many things. We
think do a militar
aeroplane, a 4x4, also a
limousine. We choose
the F1 because is the
best candidate and we
can do many thinks and
we can squeeze the
maxium. We wait that
this election be the
good and we obtain a
good mark.
1
4. PLANS
Before to cut the wood, we did
a plans. We decided that the
width of the car are 6 cm and
the start 28 cm. The diameter
of the wheels is 5,5 cm
aproximate. Thinking that the
solar panel put above the
wood, we take the correctly
measures. The photo of the
plan, isn’t the definitive, only
is a first draft. The alieron
isn’t here but we will put this
in the model car.
2
6. ELABORATION
1. Take measures.
2. Check all the materials.
3. Cut the wood.
4. Cut four wheels and drill the middle of this.
5. Take a guia and put the fronal wheels and the back wheels in other guide.
6. Weld many cables.
7. Connect all the cables in the engine.
8. Connect others cables of the switch in the engine.
9. And enjoy the car!
4
7. HOWARENOW?
Now the car is like this. Still
we have to connect the engine
and do more things. This
photos only are the principe.
The next session we try to
connect the wires to the
engine. The last session we
soldered a metal and we
connected the cables to the
switch. Every week on the
blogs we will put some photos
and information.
(Our blogs are in the final of this presentation).
5
8. OBJECTIVE
Our objective is simple.
Do a car that function
very good and his
aesthetic also will be
good. All the group, we are
striving many. Also we can
do this car maxium similar
to a F1 car.
6
9. CONCLUSION
● Our experience is and will be reconfortable. We exert all the group
to obtain a good result. All the people we learn to live in group and
work all together. Also, the group did accept the incorporaion of
Claudia. All of the group, we help each other. We wait that the result
will be positive.
7