1. 5806W3
WIRELESS PHOTOELECTRIC
SMOKE DETECTOR
Honeywell’s 5806W3 is a 3V battery operated, photoelectronic eliminate nuisance alarms and virtually eliminates non-billable
smoke detector with a built-in wireless transmitter. It facilitates service calls and fines resulting from false alarms. The
fire verification for false alarm reduction requirements by microprocessor allows the detector to automatically maintain
ANSI/SIA CP-01standards and is intended for use with any of proper operation at factory calibrated detection levels,
Honeywell’s 5800 Series wireless receiver/transceivers for even when sensitivity is altered due to the presence of
residential installations. The 5881ENHC or 5883H receivers are contaminants settling into the unit’s smoke chamber.
required for commercial installations. A removable detector cover and chamber top allows the
technician to quickly and easily clean the detector chamber
The transmitter can send alarm, tamper, maintenance (when
without disassembling the detector head.
control panels are equipped to process maintenance signals)
and battery condition messages to the system’s receiver. The Since there are no holes to drill or wires to run, installers can
maintenance signal fully complies with the sensitivity test preserve the beauty of the protected premise while protecting
requirement specified in NFPA 72, 7-2.2 and is UL approved. it. The 5806W3 is an ideal smoke detector for difficult to wire
locations, applications where room aesthetics are critical or
The 5806W3 incorporates a state-of-the-art optical sensing
where hazardous materials exist.
chamber and advanced microprocessor. It also helps
FEATURES
• Smoothing Algorithms chamber without disassembling the • Improved Robust RF Field
Mathematical calculations in the detector head. Strength
detector’s software that minimize The distance between the detector
• Approved UL Listings for
nuisance alarms by smoothing out and receiver has been significantly
Residential and Commercial
short term spikes from dust and increased.
Applications
smoke.
Both residential and commercial Additional Features:
• Smart Check installation requirements are met. • Utilizes one long-life 3V lithium battery
A signal is sent to the control panel
• Additional LED Status Indicators • Microcontroller runs on an
when the detector requires cleaning.
Identifying between alarm or trouble 4.0 MHz clock
This allows a regular, non-emergency
conditions is easier with green and
service call to clean the detector • Horn operates at 3.3 KHz with
red LED status indicators. The green
before it goes into alarm. sound pressure level of 85dBA
LED denotes a normal condition
at 10 feet
• Drift Compensation while the red LED indicates an
Virtually eliminates nuisance alarms abnormal condition. • Built-in wireless transmitter, temporal
from long-term dust build-up by code 3 sounder
• Easy-to-install Mounting Base
automatically adjusting the detector’s
The sturdy mounting base allows the
sensitivity.
detector to be more easily installed
• Removable Detector Cover and on uneven surfaces (i.e. stucco). The
Chamber Top mounting base has larger mounting
Provides the technician the ability to ports to accommodate drywall
quickly and easily clean the detector anchors for easy surface mounting.
