The R-NC8000 nozzle cleaning machine adopts the multi-nozzle spray cleaning method, uses fluid mechanics to break up the water, produces extremely fine water mist, forms a strong kinetic energy at the speed of sound, and sprays onto the suction nozzle, forming on the top of the suction nozzle to be cleaned. A constant energy field that breaks down dirt on and inside the nozzle. The machine does not require any solvents and can be cleaned with industrially pure water. Cleaning: The machine is fully automatic cleaning, 30 suction nozzles can be cleaned each time, different types of suction nozzles are equipped with different fixture trays, any type of placement machine suction nozzles can be cleaned, and compressed air is automatically dried after cleaning. Inspection: Take out the jig tray and put it on a special nozzle inspection device for inspection, and you can observe the real cleanliness of the nozzle after cleaning.

1. Nozzle cleaner
Model: R-NC8000
Technical Specification
1. Equipment overview:
The R-NC8000 nozzle cleaning machine
adopts the multi-nozzle spray cleaning
method, uses fluid mechanics to break up the
water, produces extremely fine water mist,
forms a strong kinetic energy at the speed of
sound, and sprays onto the suction nozzle,
forming on the top of the suction nozzle to be
cleaned. A constant energy field that breaks
down dirt on and inside the nozzle. The
machine does not require any solvents and
can be cleaned with industrially pure water.
Cleaning: The machine is fully automatic cleaning, 30 suction nozzles can be
cleaned each time, different types of suction nozzles are equipped with
different fixture trays, any type of placement machine suction nozzles can be
cleaned, and compressed air is automatically dried after cleaning.
Inspection: Take out the jig tray and put it on a special nozzle inspection
device for inspection, and you can observe the real cleanliness of the nozzle
after cleaning.
2. Equipment features:
* Clean 30 suction nozzles at a time, with short cleaning time and high efficiency
* Instead of traditional manual cleaning, it solves the problem of ultrasonic cleaning
and reduces the occurrence of patch throwing
* Atomized water supersonic jet cleaning, completely solves the dirt and impurities
that cannot be cleaned by ultrasonic waves
* The cleaning will not be unclean due to the smaller and smaller nozzle aperture
* Cleaning is more thorough, directly prolonging the life of the suction nozzle, the
cleaning rate is over 99%
* Easy to operate, the interface can be switched between Chinese and English
* Never use cleaning agent, only clean with environmentally friendly pure water or
deionized water
* Using the touch screen control interface, the operation is simple and easy to
understand
* Suitable for all kinds of placement machine nozzles, the cleaning effect is more
obvious for cross-shaped, I-shaped and special-shaped nozzles
NOZZLE CLEANER MODEL: R-NC8000

2. 3. Equipment specifications and parameters
Model : R-NC8000
Equipment size: 440×500×530mm( L×W×H)
Equipment weight: 35KG
Cleaning fluid type: industrial pure water
Cleaning fluid consumption: ≤400CC/H
Air source: compressed air
Operating pressure range: 0.5 - 0.65Mpa (during cleaning)
Injection pressure: ≤0.4Mpa
Air consumption: ≤ 500NL/min
Power supply voltage: AC220V, 50HZ
Rated power consumption: MAX 100W
Nozzle tray specification: 30 stations
4. Working principle
High-pressure jet technology: A. Fine water mist particles, continuously
pressurized to crush the water, and produce 3-10um particles of water mist to
clean the dirt on the inner wall of the small nozzle aperture.
Pulse power: B. Form a powerful pulse power jet at the speed of sound
(V=360m/s) to the nozzle, which can reach a pulse frequency of 30 times per
second, forming a continuous impact on the nozzle to be cleaned. Crush the
dirt on the surface and inside to achieve the purpose of cleaning.
5. Installation conditions
1). Power supply (two-phase two-wire): 220VAC, 50HZ, 10A
2). Air source 0.4-0.65MPa (φ8 air pipe)
3). Drain pipe size: φ8
4). Equipment dimensions 440×500×530mm( L×W×H)
NOZZLE CLEANER MODEL: R-NC8000