Equipment features: 1) Microcomputer intelligent control, cutting time and length can be set. One-button start/stop, easy to operate. 2) Limit switches are installed at both ends of the shearing stroke of the equipment, and the whole machine will be powered off if the stroke is exceeded. 3) A safety sensor is installed at the waste recycling place. When the material box is removed, the equipment will automatically stop working to prevent employees from extending their hands from the bottom of the equipment into the working area of the equipment and knives to ensure safety. At the same time, ensure that all the cut materials fall into the recycling box. 4) This machine has a one-year warranty and permanent after-sales service 5). This tape cutting machine is suitable for all kinds of SMT tapes. It can easily cut from 0.05mm to 1.5mm thick tape. 6). Patent (Patent No. ZL201520023125.6) The equipment is elegant in appearance, occupies a small area, and is convenient to use and store. specific The size can be customized according to the recycling area of the customer's various placement machines. 7). Blade: The material is imported DC-53, and it is guaranteed to be used for one year without sharpening. 8). Patent (Patent No. ZL201530007763.4) tooth knife rolling cutting mechanism, when cutting, it relies on eight springs at the bottom of the tooth knife The tension makes the cutting edge plane of the gear knife and the straight knife point contact tangent, which solves the problem of fast wear of the upper and lower straight knife blades on the market. Disadvantages, all our belt cutters are guaranteed for two years (including the blade), the four sides of the straight knife can be turned over for use, and the toothed knife can be ground repeatedly. same At the same time, it completely solves the phenomenon that the traditional tape cutting machine uses a small blade to cut back and forth and encounters the frequent jamming of the material tape.