1. Electrical Instrumentation and Controls Engineer (EI&C)
Advance Level
My Ability to Perform the Following Jobs:
My Essential Duties and Responsibilities
 Works with project manager and clients
 Develops scopes of work for EI&C systems, networks and projects
 Leads I&C design teams for medium and large projects
 Designs PLC/DCS and SCADA networks for medium and large systems
 Specifies industrial fiber optic networks, systems and components
 Designs SCADA network block diagrams
 Selects instrumentation
 Develops P&IDs
 Develops control strategies
 Designs control panel layouts
 Prepares ISA data sheets and instrument sites
 Develops input/output point lists
 Reviews submittals
 Prepares specifications for instruments, computers, networking equipment, PLCs and
associated components
 Develops preliminary and final construction cost estimates for I&C
 Meets with clients for design-related workshops, including instrument preferences, HMI
graphics design and standard development
 Designs RTU telemetry for SCADA systems implementing new technologies
 Mentors and trains Staff Instrumentation Engineers
 Prepares technical memorandums and reports
 Manages the instrumentation portion of medium to large sized instrumentation and
control projects for power utilities, industrial plants, water and wastewater treatment
facilities
 Conducts quality management reviews of instrumentation and control designs
 Participates in continuing editing and development of I&C master specifications
 Develops project specific specifications for unusual or unique instrumentation
applications
 Prioritizes and balances competing project demands and conflicting project
requirements
 Manages other instrumentation and control engineers and CADD technicians to
effectively complete work with attention to detail
 Delegates tasks to others and follows ups on completion and quality of work
 Identifies and consults with others on solutions to unusual, difficult, or complex tasks
 Effectively participates in client contacts and business development efforts
 Identifies alternatives, evaluates each, and determines appropriate actions to move
forward
 Makes solid and implementable decisions in a timely manner
 Reduces complex aspects of instrumentation and control engineering to terms
understandable to others
 Attends to details in preparation or review of calculations, drawings, and specifications
 Monitors scope, schedule, and budget and controls the work to the project plan

2.  Understands, implements, and enforces company and client technical standards on
projects
 Travel required when requested
 Makes site visits to observe during construction and operation
My Skills
 Expert in the design of industrial instrumentation and control systems, selection and
specification of instruments, and design of industrial facilities
 I have full knowledge of the using smart field devices, PLC/DCS and SCADA
 Expert in developing, reading and understanding P&IDs and control schematics
 Expert in design and development of industrial communication control networks
 Highly motivated self-starter with the ability to work with minimum supervision on
medium to large instrumentation and control systems for water and wastewater
treatment facilities
 Understands projects at the conceptual level, and develops corresponding
instrumentation and control engineering scope of work, budget and schedule
 Ability to work independently to effectively complete routine or moderately complex
tasks
 Ability to simultaneously think beyond past approaches and propose practical
approaches to instrumentation and control design and construction
 Listens and understands the concerns and needs of other project teammembers
 Ability to control behavior under situations involving pressure, conflict and uncertainty
 Communicate clearly and concisely in speech, writing, and contract documents
 Presents communications in an organized fashion and with appropriate level of detail
 Positively influences both peers and subordinates to move toward overall project goals
 Actively looks ahead to plan for and respond to project challenges
 Seeks long term benefits to the overall project when determining instrumentation and
control design approach
 Sensitive to political issues and client preferences in determining instrumentation and
control engineering approach
 Aware of the "business" of instrumentation and control engineering as well as the
technical design issues
 Strong verbal and written communications skills that are well organized and persuasive
 Proficient in public speaking roles
 Proficient in MS Word, Access, and Excel