These presentation is made up for internship. I have many skills gain in these company. How to make a programme of design for punching and bending operations for machine.
2. SANJIVANI RURAL EDUCATION SOCIETY’S
SANJIVANI COLLEGE OF ENGINEERING KOPARGAON 423603 (M.S.)
• Name :- Kanade Vithoba Santosh
• Class :- B.Tech
• Roll No :- 103
• Div :- B
• PRN No :- UME19M1085
• Guide Name :- Mrs.S.M.Gujrati
4. INTRODUCTION
COMPANY NAME :- VAIBHAV ENERGY EQUIPMENTS PVT.LTD
These company makes Electric panels. These panels is
essential for Industrial Automation.These company is
Established in the year 1989, They are one of the top notch
manufacturers and suppliers of LT and HT panels. They also
provide the job work for the panels as per the requirements of
our clients. The raw materials used for production are steel,
copper flats, wires, lugs, ferrule and many others and these are
procured from steel mills.
4
6. CHAIN MANAGEMENT
6
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Design and Material
Managements
Department
FABRICATION
DEPARTMENT
1.Punching 2.Bending
Weding And Finishing
Department
Colouring And
Poweder Coating
Department
Assembly CSS
7. PUNCHING DEPARTMENT
7
In these Departments 2 operator and 3 helpers are working the programmer makes the code and
save the programme in pendrive. The operator takes these pendrive and put in the CNC punching
machine then the operator turn on the machine and put the pendrive Then the helpers are take the
plane sheet and put in the machine. In these machine many tools or components are available. These
CNC punching is from AMADA company made by Japan.In these Machine two options are available to
read the programme 1.Pendrive (USB) 2.Barcode
currently operators are used pendrive because it is easy to operator to operate these programme.
In these processes different software are used to make the Design of punching for plane sheet. In these
industry RADAN And APTOO these two software are used to make the code
15. REMOVING THE WASTAGE MATERIAL
15
A short step after punching is
finished There is small step
after that is to remove the
main part from punched
sheet and give special id to
the part because after the
punching operation is
finished the part is given an
id to make the work is fast or
to understand quickly in
bending operation
17. BENDING DEPARTMENT
Total 4 workers are required in these department 2 operators or 2 helpers required on
these machine. These department is used to work wherever there is a need to bend in the
punched sheet from punching machine.These bending machine also AMADA company made
by Japan
The operator on this machine also work according the out body and inbody design of
the panel given by Engineer. Bending machine is complicated the comparison of punching
machine. A lot of manual work has be done in these machine
17
22. NEXT DEPARTMENTS
22
WELDING & FINISHING
• In these department Total
5 Welders And 1
Supervisor are work in
these department
punched and bended
parts are connected to the
body of panel given in the
design
COLOUIRING & POWEDER
COATING
• In these Department
approximately 7 to 8
workers are work in these
departemnet colour the
parts and coated with
poweder coating
ASSEMBLY
• Connect the parts and
make Fully assembly of of
panel
STE
P 3
STE
P 4
STE
P 5