1. Vijayakumar PANDI
Mail: charmingvijay@gmail.com
Mobile: +91 98941 79264
Education Bachelors in Mechanical Engineering from College of Engineering, Guindy, Anna University, Chennai,
INDIA, April 2007
Years Total 9.5 years of work experience in Aerospace Industry with INFOSYS at ENG unit;
Experience 4.5 years of experience in Concessions creation;
2.5 years of experience with Electrical Systems design and Installation;
2.5 years of experience with Structural (Metallic) design and Installation;
Onsite Total 3 years of hands-on experience at SPIRIT Saint-Nazaire factory in France (07/2013 – 07/2013);
Experience Worked at this prime factory location where the panels of Section 15 from USA are
assembled; Then, delivered to the AIRBUS factory for further integration and completeness to
delivery;
Handled Defects analysis by QN validation and Concession creation;
Co-ordinated with the client to manage their expectations and deliveries from the offshore
team;
Work
Experience 10/2012 – till date, Airbus A350 XWB _ Section 15, Concessions (-900 & -1000 Variants)
• Analyze the non-conformances identified, at the QN validation level.
• COD creation, Concession creation- T0 (managing RETs), interaction with higher task personnel
• Review of concessions using Standard documents, Technical notes
• Direct interaction with respective stake holders from LE, Inspection, SCM, NDI, ME, Quality
leads.
• Using Airbus standards, Airbus process and Methods during Concessions activity
• Coordination with offshore team for concessions activity
• Sharing KPIs and delivery status to the client.
• Possess sound knowledge of M2852 and Airbus Technical notes related to non-conformities
• Have good design knowledge of composites and metallic structures
• Tools used - CatiaV5, Airbus SAP PAC, Net Inspect, VPM, PDM
04/2010- 09/2012, Boeing 787_ Structural design & installation
• Involved in the detailed design of various structural components like PF stanchions, Fuse Pin-
Clevis Assembly, Intercostals, Stiffeners & Stabilizers, FCF Vertical stanchions etc. and its
installation details onto the fuselage.
• Developing concepts and maturing the design, based on load change and results from Stress
analysis.
• Finalizing the design for its requirements and then followed by reviews and approvals.
• Involved in the MBD creation for Machined, Extruded & Sheet metal Parts.
• Design validation & reviews for standard conformance & other specifications & the creation of
release documents and Release actions in ENOVIA.
• Tools used - CatiaV5, ENOVIA V5, IVT
11/2007- 03/2010, Boeing 787_ System Support design & installation (Wiring & ECS systems)
• Worked on providing supports to Wiring & ECS systems using Clips, Spanners, Stand-offs,
Grounding blocks, Spacers, Jumpers, Ducts, Clamps, Grommets, Ring posts, Saddle etc.
• Requirement Analysis, including the evaluation for feasibility & sustainability of structures &
systems, & consequential evaluation of scope of work & development of work methodology.
• Closely worked with suppliers doing Wire routing & involved in negotiating the Provision of
System Supports & Other Interface issues.
• Detailed design of System components like Sheet metal & Extruded brackets & Clips made of
Aluminum & Composites.
• Study of design improvement for cost & weight reduction opportunities in system brackets &
electrical equipment supporting components.
1

2. Vijayakumar PANDI
Mail: charmingvijay@gmail.com
Mobile: +91 98941 79264
• Migration of complete Wiring & ECS system supports to its respective Structural installations &
Assemblies without affecting the routing of those systems.
• Tools used - CatiaV5, ENOVIA V5, IVT
Tool CATIA, ENOVIA VPM, PDM, SAP, IVT and MS Office
Knowledge
Job Related
Training APR 2013 - PDMLINK SSCI DEF.PH.
APR 2013 - VPM A350-DESIGN IN CONTEXT
AUG 2013 - NET INSPECT
AUG 2013 - CERP TRAINING
DEC 2013 - 20 STRU CONCESSION CREATION IN SAP PAC
Hobbies & Formula 1, Automobile and Aerospace Industry - Technical developments and Updates
Interests Swimming, Yoga, Skating and Shuttle Badminton
Personal
Details Name : Vijayakumar PANDI
• Gender : Male
• Date of Birth : 2nd
June 1986
• Life Partner : Married to T. Ramya
• PAN card no : AFWPV6960R
• Passport no : G7090898, Valid till Feb2018
• Father’s Name : M. Pandi
• Mother’s Name : P. Kala
• Address : Flat A108, GK Jewel City,
Kudlu Village, Haralur road,
Bangalore - 560068
Declaration
I do hereby declare that the particulars of information and facts stated herein above are true, correct and
complete to the best of my knowledge and belief.
Place : Signature :
Date : Name : Vijayakumar PANDI
2