Power-CEOTM patented smart technology provides new levels of savings
1. What sets POWER-CEO™ apart from all other products currently on the market?
Power-CEO™ patented smart technology provides new levels of savings by independently and
dynamically adjusting each phase to almost perfect efficiency while consuming less power than a pen light!
DUNS: 967622361 CAGE: 6C0U6
816-533-7373
www.powerceosales.com
Benefits:
UL Approved
Green Technology: Less strain on the Power
Grid
=less demand for power generation.
=less pollution.
Compensates for voltage drops during peak
demand periods.
Substantial reduction of current.
Improvement in power quality.
Reduces total load current.
Correction will reduce the KVAH, usage, total
power, time of use sensitivity, and
increase the energy efficiency.
Reduction in distribution system
temperatures.
NO over-capacitance.
NO switching spikes.
NO reactor coils.
NO arcing.
NO maintenance.
NO leading PF.
NO winding heating.
NO creation or amplification of harmful
harmonics.
Lowers feeder stress.
Lowers transformer stress.
Facilities with utility charges benefit if they
have the following:
PF penalty
Line loss penalty
Peak KVA/KW demand charges
KVA or KVAH billing methods
Any other low efficiency related
penalty
Available Options:
Surge Protection
ENF-Electric Noise Filtration
EMF-Electromagnetic Field Reduction
WER-CEOComputerized Energy Optimizer
P
TM Power CEO™ Computerized Energy Optimizer is the
superior new standard for Dynamic Inductive Load
Control!
Over 4000 different sized models available.
Scalable from 110V to 600V in 50Hz or 60Hz.
Single, Split Single, Two and Three Phase Applications.
IE voltage application 110,110/190, 115, 120, 120/208, 127, 127/220, 190, 200,
215, 220, 230, 240, 240/415, 277, 330, & 347 Volts.
System uses 5 milliwatts while monitoring up to a maximum of 100 milliwatts at
peak demand.
Logically separates each phase/hotline in Split Single, Two, and Three phase
systems.
Independently analyzes each phase/hotline in Split Single, Two, and Three phase
systems.
Maintains a power factor of .98 or greater on all phases/hotlines independently
without delay.
Aligns the phase angle by correcting the power factor of each phase within a
range .98 to .99 with precise increments of capacitance applied to each phase.
Uses precise steps of capacitance to allow for the most accurate adjustments
every cycle, with adjustment steps as small as .03 kVAR available per
phase/hotline.
Operates in parallel, not in series, which helps correct unbalanced loads.
Computer smart chip technology onboard.
Uses computerized triggering.
Continually adjusts, often many times per minute.
POWER-CEO™ always saves more power than it uses, in some cases a 35%
total energy reduction has been achieved.
Does NOT:
Cause switching spikes.
Create over-capacitance.
Use reactor coils.
Create sparks.
Create harmonics.*
* Harmonics Package Available.
PowerCEO
L.L.C.