1. PROFILE:
o I am a Qualified Mechanical Engineer with total 5.5+ years of experience and knowledge in Mechanical
system Design, Projects, Installation, Testing and Commissioning, Operations and Maintenance in Rolling
Stock Industry, predominantly in MONORAIL and EMU Projects.
ACADEMIC QUALIFICATIONS:
Qualification Institute/University Year Score
o Diploma in Rail Transport and Management
Institute of Rail Transport, New Delhi.
(Ministry of Indian Railways)
2016 Pursuing
o P.G.D.M. (MBA in Operations) Welingkar Institute of Management 2015 80.00%
o Bachelor of Mechanical Engineering Mumbai University 2011 65.27%
o Diploma in Mechanical Engineering Fr. Agnel Polytechnic, Vashi 2008 69.41%
o S.S.C. / Xth
(English Medium - Technical) Maharashtra State Board 2004 80.53%
WORK EXPERIENCE:
RST Warranty Engineer – BOMBARDIER TRANSPORTATION June, 2015 – Present
o Testing and Commissioning of 12car 25kV AC 50 Hz state-of-the-art EMU Rakes for MRVC II (Mumbai
Rail Vikas Corporation) project of Indian Railways Western Mumbai Suburban Trains.
o Successfully demonstrated Drives Assembly with fixtures at W.R. Mahalaxmi Workshop and Vendor
assessment for Traction Motor repair done jointly with Hennigsdorf, Germany TOP team.
o Managed POH (Periodic overhaul) of 2 Prototype trains at Client’s WR MX workshop.
o Leading, Planning & Execution of Traction motors and gearbox replacement.
o Co-ordinate Retrofit campaigns in conjunction with the PI Manager for the Electrical system and upload
the MITRAC TCMS and CCON software for microprocessor based IGBT VVVF propulsion system.
o Troubleshooting with Schematic of Control unit, IP and MVB, HMI, Digital and Analog I/O devices.
o Conducted Routine Test (IEC 61133) on initial Series Rakes at Integral Coach Factory (ICF) Chennai.
o Static and Dynamic testing of Rakes with client WR, MRVC and RDSO.
o Liaison and discussion with Client for commissioning & operations major failures.
o Warranty repair planning/prioritization, Troubleshooting Analysis, Customer support Management.
o Manage field data reporting process with Work Order, Failure Report for input to RAMS and 8D Report.
o Team Leading and delegation after Tool-Box Talk to use Safety PPE’s, Electrical Lock out and Tagout.
o Propose MR to Engineering in order to improve the availability and reliability of the trains.
o Training of Client's personnel for train operation and maintenance.
o Address technical issues of sub-systems with suppliers like Telvik GPS based PIS & PA system, Knorr-
Bremse Air Compressor, Lloyd Ventilation Unit, Schunk Pantograph, etc.
o Preparation of Predictive Maintenance measures of trains and Failure trend analysis.
o Rectification of faults reported by EMU Control to reduce the delay in daily operation on mainline route of
124 Km from Churchgate to Dahanu including Peak hours with Super Dense Crush Load.
o Responsible for issue rectification on HV and LV components, Motor and Auxiliary converter, MCG, etc.
o Verification and Validation of Design Documents, Drawings and SOP’s of Mechanical Systems.
o Comply and fulfill all applicable requirements of audits like ISO, IRIS, 5S. Firefighting, Basic First Aid
and Electrical Safety Training completed.
Rolling Stock Supervisor – SCOMI - UTPL, MUMBAI MONORAIL. May, 2013 – June, 2015
o Testing and Commissioning of India’s 1st
Monorail system 4car 750VDC trains for MMRDA (Mumbai
Metropolitan Region Development Authority).
SANTOSH G NAIK
Date of birth: 24th
September, 1988
Male, INDIA.
Sai Kripa, B-2/17/6, Sector-15, Vashi,
Navi Mumbai, Maharashtra.
+91 9221702484, +91 9172216401
santosh24naik@gmail.com
https://in.linkedin.com/in/santosh24naik
Passport No.: K4554450 (till 28.06.2022)

2. o Performed Testing with client and Consultant Louis Berger, Traction Motor Gearbox Vendor HYOSUNG,
Thompson CV Joint Vibration Analysis and Michelin / MRF Tyre investigation.
o Troubleshooting and repair through schematic diagram of Rolling Stock subsystems, Brake Control Unit
by Knorr Bremse, Ultimate Transport Automatic Door Control System (DCU), etc.
o Responsible for leading the Team for Troubleshooting of the RST system throughout the Alignment.
o Analyze, Develop and implement improved methods of troubleshooting Mechanical Systems.
o Detail system level Analysis and specify modifications to Design issues.
o Coordination with Design and Engineering team in Malaysia for RST Open Issues.
o FRACAS and Maintenance planning for ensuring Train Operation worthiness to OCC.
o Perform in-depth troubleshooting of faults on Bogie, Gangway, KB Pneumatic System, VOITH
Scharfenberg Automatic Couplers and MERAC HVAC and resolve issues with Ansaldo for ATP.
o Providing On-Job Training to RST Technicians and carrying out Technical document review and analysis.
o Supervision of Emergency Response Team, Interface and Depot Equipment Management, Train The
Trainers program done. Complying with requirements of SMRT Singapore and CRS safety audit.
Jr. Research Fellow / Engineer - Heat Pump Lab, IIT BOMBAY. Jun, 2011 – May, 2013
o Designed efficient and low maintenance multi-rotor transmission system for Heat Pump.
o Basic Air flow duct layout detailing for Condenser Heat Recovery based Desalination System.
o Design calculation and Selection of Planetary Gearbox and Alternator, commissioning and testing for
Plastic Wind Mill, a consultancy project of M/s Mahindra & Mahindra, Mumbai.
o Developed new concept mechanism on SolidWorks and 3dPrinting for converting Reciprocating motion to
Rotary as suggested by Project Incharge Dr. Milind .V. Rane for Energy Efficient Steam Expander.
o Design Consultancy for 3D Modeling in SolidWorks, Unigraphics NX CAD and AutoCAD.
INTERNSHIPS:
Project Trainee - TATA POWER LTD. Jul, 2010 - Apr, 2011
o Performance and Efficiency Improvisation of Combined Cycle Power Plant.
o Covered General Layout and Operational aspects of Unit#5(500 MW), Unit#6(500 MW), Unit#8(250
MW), Unit#4(150 MW), Unit#7(180 MW) SIEMENS V94.2 Gas Turbine and BHEL's HRSG.
Inplant Trainee - SIEMENS LTD. Dec, 2007 - May, 2008
o Worked on SAP R/3. Implementation of 5’s and Kaizen in PC4. Production order release of A.C.B.
Inplant Trainee - AIR INDIA LTD. Jun, 2006 - Nov, 2006
o Worked in Composite Material Repair, Landing Gear, Brakes of Boeing 747, 777 and Airbus A310.
KEY SKILLS:
o Diploma in Product Design (UG NX 7.5, Solidworks 2012, GD&T ASME Y14.5M) - CADD CENTRE.
o Certification in Robotics - Mumbai University.
o Business English Certificate - Cambridge University.
o Maharashtra State Certificate in Information Technology (MS-CIT).
o Windows XP/Vista/7/8, MS OFFICE, AutoCAD, PRO-E Wildfire 5.0 (Creo Elements/Pro), Catia.
ACHIEVEMENTS:
o 1st
position in National Level Technical Paper Presentation at BVCOE, Kharghar; Abhiyaan 2010.
o 2nd
position in National Level ROBOWARS at IIT Bombay Techfest 2009.
o 2nd
position in HOVER JUNIOR at IIT Bombay Techfest 2006.
o 1st
position in inter-collegiate Technical Paper Presentation (TPP) by MEDA at F.C.R.I.T., Vashi.
o Diploma project 2008: AERO-AQUA-LANDER a 3in1 multi-mode transport vehicle was applauded and
interviewed by digital media - NDTV 24*7.
REFERENCES:
1) Mr. Atul Panchal, Manager - Testing,
Bombardier Transportation India.
Email: atul.panchal@rail.bombardier.com
Mobile no.: +91 9773111415
2) Mr. Jishith Maroli, Sr. Rolling Stock Expert,
Ansaldo STS/ Al-Safwah, Saudi Arabia.
Email: jishith_27@yahoo.com
Mobile no.: +91 9920892227