we select cantilever beam having I,C,T section and we select material cast iron, stainless steel, steel and analyze base upon modal and static analysis.we see here deformation,stress ,strain and based upon it we conclude.
CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record
Design and analysis of cantilever beam heading
1. A Project Report on
DESIGN & ANALYSIS OF CANTILEVER BEAM
Submitted in partial fulfillment of the requirements for the award of the Degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
Submitted by
MD ZEESHAN 13X01A0366
SANDEEP KUMAR SINGH 13X01A0392
ZAFARYAB HAIDER 13X01A03C2
MD RIZWAN 13X01A0367
Under the esteemed guidance of
Mr.G.SATISH KUMAR
Associate professor
DEPARTMENT OF MECHANICAL ENGINEERING
NARSIMHA REDDY ENGINEERING COLLEGE
Affiliated to JNTUH, Hyderabad- Approved by AICTE, New Delhi
Accredited by NAAC with A Grade
2013 - 2017
2. CERTIFICATE
This is to certify that the project entitled “DESIGN & ANALYSIS OF CANTILEVER
BEAM” is a bonafide work carried out and submitted SANDEEP KUMAR SINGH by, Regd
No. 13X01A0392 to the department of Mechanical Engineering Narsimha Reddy Engineering
College, Hyderabad, in partial fulfillment of requirements for the award of degree of
BACHELOR OF TECHNOLOGY IN MECHANICAL ENGINEERING during the
academic year 2016-2017.
Guide Head of the Department
Mr.G.SATISH KUMAR Mr.P.PRAMOD KUMAR
Associate professor Associate professor
Dept. of ME, Dept. of ME,
Narsimha Reddy Engineering College Narsimha Reddy Engineering College
Hyderabad. Hyderabad.
INTERNAL EXAMINER EXTERNAL EXAMINER
3. DECLARATION BY THE CANDIDATE
I hereby declare that the work which is being presented in this dissertation entitled,
“DESIGN & ANALYSIS OF CANTILEVER BEAM”, submitted towards the partial
fulfillment of the requirements for the award of the degree of BACHELOR OF
TECHNOLOGY IN MECHANICAL ENGINEERING, Narsimha Reddy Engineering
College is an authentic record of my own work carried out under the guidance of Mr.G.SATISH
KUMAR, Associate professor, Department of Mechanical Engineering, Narsimha Reddy
Engineering College, Hyderabad.
The matter embodied in this report has not been submitted by me for the award of any
other degree or diploma. Further, the technical details furnished in the various chapters in this
project are purely relevant to the above project.
SANDEEP KUMAR SINGH 13X01A0392
4. ACKNOWLEDGEMENT
The satisfaction and euphoria that accompany the successful completion of any task
would be incomplete without the mention of people who made it possible, whose constant
guidance and encouragement crowned our efforts with success. It is a pleasant aspect that I have
now the opportunity to express my guidance for all of them.
The first person I would like to thank is my guide Mr.G.SATISH KUMAR, Associate professor
in Department of Mechanical Engineering, Narsimha Reddy Engineering College, Hyderabad.
His understanding, encouragement and personal guidance have provided the basis for this
project.
I wish to thank Mr.P.PRAMOD KUMAR, Associate Professor and Head of the Department of
Mechanical Engineering, Narsimha Reddy Engineering College, Hyderabad who has extended
his support for the success of this project.
I wish to thank Dr.C.N.V.SRIDHAR, Principal of Narsimha Reddy Engineering College,
Hyderabad who has extended his support for the success of this project.
I sincerely thank our Management and all the teaching and non-teaching staff of the Mechanical
Engineering Department for their timely suggestions.
Last but far from least, I also thank my family members and my friends for their moral support
and constant encouragement. I am very much thankful to one and all that helped me for the
successful completion of the project.
MD ZEESHAN 13X01A0366
SANDEEP KUMAR SINGH 13X01A0392
ZAFARYAB HAIDER 13X01A03C2
MD RIZWAN 13X01A0367
5. ABSTRACT
This study investigates the deflection and stress distribution in a long, slender cantilever
beam of uniform rectangular cross section made of linear elastic material properties that are
homogeneous and isotropic. The deflection of a cantilever beam is essentially a three
dimensional problem. An elastic stretching in one direction is accompanied by a compression in
perpendicular directions.
In this project, static and Modal analysis is a process to determine the stress, strain and
deformation. Vibration characteristics (natural frequencies and mode shapes) of a structure or a
machine component while it is being designed. It has become a major alternative to provide a
helpful contribution in understanding control of many vibration phenomena which encountered
in practice.
In this work we compared the stress and natural frequency for different material having
same I, C and T cross- sectional beam. The cantilever beam is designed and analyzed in ANSYS.
The cantilever beam which is fixed at one end is vibrated to obtain the natural frequency, mode
shapes and deflection with different sections and materials.
i