srmcem front page

1. Page - 1
A
SEMINAR REPORT
ON
ELECTRONIC FUEL INJECTION
Submitted for the Partial Fulfilment of Award of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
(2017)
BY
PUNEET KUMAR SINGH
ROLL NO – 1312240153
Under the guidance of
Prof. P.C. TRIPATHI
AND
Mr. AKHILESH KUMAR RATHORE
(SEMINAR COORDINATOR)
SHRI RAMSWAROOP MEMORIAL GROUP OF
PROFESSIONAL COLLEGES, LUCKNOW
Affiliated to
Dr. A.P.J. ABDUL KALAM TECHNICAL UNIVERSITY, LUCKNOW.

2. Page - 2
DEPARTMENT OF MECHANICAL ENGINEERING
SRMGPC
CERTIFICATE
Certified that seminar report entitled “ELECTRONIC FUEL
INJECTION” submitted by PUNEET KUMAR SINGH (1312240153) in
the partial fulfilment of the requirements for the award of Technology of DR. A.P.J.
ABDUL KALAM TECHNICAL UNIVERSITY, LUCKNOW, is a
record of student’s own work carried under our supervision and guidance. The project
report embodies result of referred work and studies carried out by student himself and
the content of the report do not form the basis for the award of any other degree to
the candidate or to anybody else.
Prof. P.C. TRIPATHI Prof. D.V. MAHENDRU
AND Head of Department
MR. A.K. RATHORE
( Asstt. PROFESSOR )
(Seminar Guide)

3. Page - 3
DEPARTMENT OF MECHANICAL ENGINEERING
SRMGPC
DECLARATION
I thereby declare that the seminar report entitled “ELECTRONIC FUEL
INJECTION” submitted by me in the partial fulfilment of the requirements for the
award of the degree of Bachelor of Technology (Mechanical Engineering) of DR.
A.P.J. Abdul Kalam Technical University, is record of my own work carried under
the supervision of Prof. P.C. TRIPATHI and Mr. A.K. RATHORE.
To the best of my knowledge this report has not been submitted to Dr. A.P.J.
Abdul Kalam Technical University or any other university or institute for the award
of any degree.
PUNEET KUMAR SINGH
1312240153
Mechanical engineering
SRMCEM, Lucknow.

4. Page - 4
DEPARTMENT OF MECHANICAL ENGINEERING
SRMGPC
ACKNOWLEDGEMENT
"It is not possible to prepare a report without the assistance & encouragement of other
people. This one is certainly no exception. "
On the very outset of this report, I would like to extend my sincere & heartfelt
obligation towards all the personages who have helped me in this endeavour. Without
their active guidance, help, cooperation & encouragement, I would not have made
headway in the project.
I am ineffably indebted to Prof. D.V. MAHENDRU, HOD, Mechanical Department
for taking pain-staking efforts & Prof. P.C. TRIPATHI and Mr. A.K. RATHORE for
conscientious guidance and encouragement to accomplish this assignment.
I extend my heartiest gratitude to SRMCEM for giving me this opportunity. I also
acknowledge with a deep sense of reverence, my gratitude towards my parents and
member of my family, who has always supported me morally as well as
economically.
At last but not least gratitude goes to all of my friends who directly or indirectly
helped me to complete this report and for providing me with the journals & research
papers and thus providing the overall support to me.
Any omission in this brief acknowledgement does not mean lack of gratitude.
Thanking You
PUNEET KUMAR SINGH
1312240153
Mechanical engineering
SRMCEM, Lucknow.