Coefficient of Thermal Expansion and their Importance.pptx
Sam d chungath cv updated
1. SAM DEVASSY CHUNGATH
Phone: +97477109515 (Qatar), +918075736369 (India)
LinkedIn profile: https://www.linkedin.com/in/sam-devassy-chungath-223a0635/
Email:samdchungath@gmail.com
BMS DESIGN AND COMMISSIONING PROFESSIONAL
-Specializing in Airport and Luxurious Hotel Building Projects-
Results-oriented and hands-on Building management system design and commissioning engineering professional with more than
8 years expertise in all facets of the BMS industry. Verifiable track record for the successful completion of multimillion projects
through co coordinating with customers, local vendors with international standards. Well-versed in project estimation, design
,document preparations, material procurement and testing commissioning through certification of occupancy.
Areas of Expertise included:
Leadership and Team Building Testing and integrating other systems to BMS
Project Planning and monitoring MCC Panels installations and startup and maintenance
BMS Installation and Commissioning HVAC equipment start up and commissioning
Smoke ventilation systems commissioning for
Stair Case and Basement Parking system
EMPLOYMENT HISTORY
Organization : QATAR ELECTRO MECHANICAL SOLUTIONS, Doha .Qatar
Designation : BMS Control Engineer – (JCI-FX System , Trane) Building Management System.
Duration : Presently working from December 2014
Responsibilities:
• Designing of building management systems based upon client shop drawings and end user requirements.
• BMS (Johnson Controls, Trane) Components Selection (Chilled water Valves, Actuators, DDC Controllers, I/O Modules,
Sensors, Switches, etc)
• Commissioning of Johnson Controls (Facility Explorer) BMS in field wise and supervisory level with GUI.
• Coordination with site team for device (Trane and Johnson Controls) installation, cabling and Termination at Field vise
and DDC panel vise.
• Preparing Logic of Program for Controlling and monitoring HVAC, Electrical and Plumbing (Johnson
Controls) and necessary Shop drawings, System Architecture, DDC panel wiring diagrams and I/O Scheduling for Trane
and Johnson Controls BMS System.
• Preparing Necessary Submittal (Engineering, Operation and Maintenance Manual, Training activities) with
technical and functional specifications.
• Design and Estimation of JCI GRMS System for Home Automation.
• Monitoring & Control of project execution activities.
• Supervision and execution of Power Cable laying, pulling and termination at MCC Panel side and HVAC Equipment side
with necessary containment installation and supporting.
• Installation of all kind of MCC Panels and Control Panels for HVAC and BMS.
• Smoke ventilation system commissioning for stair case and basement parking.
Organization : SIEMENS W.L.L BUILDING TECHNOLOGIES, Doha .Qatar
Designation : BMS Design Engineer – Siemens Building Management System.
Duration : June 2012 to November 2014
Responsibilities:
• Designing of building management systems based upon client shop drawings and end user requirements.
• BMS (Siemens) Components Selection (Chilled water Valves, Actuators, DDC Controllers, I/O Modules, Sensors,
Switches, etc)
• Coordination with site team for device (Siemens) installation, cabling and DDC panel.
1
2. • Preparation Of necessary Shop drawings, System Architecture, DDC panel wiring diagrams and I/O
Scheduling for Siemens BMS System.
• Preparing Necessary Submittal (Engineering, Operation and Maintenance Manual, Training activities) with
technical and functional specifications.
• Monitoring & Control of project execution activities.
Organization : Manappuram Group of Companies,Banglore .India
Designation : IT Hardware and Networking Engineer – IT Department
Duration : January 2010 to April 2012
Responsibilities:
• Installation of IP Camera and its software installation and maintenance.
• All IT Assets installation and maintenance (PC,Laptops,Routers and switches)
• IT support for Accountant software and other software related finance operations.
SOFTWARE PROFICIENCIES:
• AutoCAD - For designing DDC panel wiring diagram and I/O point scheduling and also for Shop Drawings.
• TCPA Tool - TCPA Tools stands for Trane Chiller Plant Analyzer.
• JCI ASSET Tool - ASSET allows to select and refine Johnson Controls BMS systems and generate proposal,
submittal and ordering documents for the project
• JCI CST- The purpose JCI CST is to allow a user to quickly find the best hardware config. for his defined points
count.
• JCI PCT – The FX-PCT is used to configure, simulate, and commission the Facility Explorer Programmable
Controllers (FX-PCAs, FX-PCGs, FX-PCVs, and FX-PCXs).
• NIAGRA-WORKBENCH - FX Supervisory Controllers and FX Server are all built upon a software framework called
Niagara AX. This mainly for Graphics build up, Alarm Console, Trending, Totalization and scheduler of BMS.
• GOOGLE SKETCHUP TOOL - This is a 3D modeling computer. During my career, I used this to prepare 3D Floor
Plan for BMS Graphics works.
• MS OFFICE
ACHIEVEMENTS
Successful completion of following projects as BMS Design/Commissioning Engineer,
• Hamad International Airport Project in Qatar
• Abraj Quartier Gateway Hotel Buildings at Pearl Qatar
• Parcel Parking Building at Pearl Qatar
• Tawar Mall and Hotel facility in Qatar
• Rotana Hotel Building in Qatar
• Al Bustan Office buildings in Qatar
Training/Seminars,
• Trane SE Controls Training Program at Trane Academy; Business Bay; Dubai on 7th
to 9th
July 2015.
• Johnson Controls (FX System) Supervisory level Training Program at JCI Academy, API Towers; sheik zayed road,
Dubai on 5th
to 9th
June 2016.
• Johnson Controls GRMS (KNX) Home Automation Training Program at Qatar Electro Mechanical Solutions, Salwa
Road, Doha, Qatar on 20th
June 2017.
2