1. SADDAM AL-AMIN MOHD KHAYRY
No. 4 Jalan Makmur,
Bandar Tun Razak,
56000 Kuala Lumpur
MALAYSIA
Mobile +60166319946
e-Mail saddam_aa91@yahoo.com.my
Excellence interpersonal, known for versatility, great in team work, tremendous independent
work, eagerness to learn and ability to “wear many hats”.
PERSONAL DATA
Age : 26 years
Date of Birth : 15th January 1991
Place of Birth : Kuala Lumpur
Sex : Male
Marital Status : Single
Race : Malay
Religion : Muslim
Expected Salary : RM3000
SUMMARY OF QUALIFICATION
More than 2 years’ experience as an Executive Controller for a Biodiesel plant which
using Distributed Control System (DCS).
5 month experience as a Trainee at Petrochemical plant which required me to
involved in process and production field.
Distributed Control System (DCS) Expert which required high focus and attention to
control this system.
Lead the non-executive level to operate the processing plant and control the quality of
the product.
Bachelor in Chemical Engineering Technology major in Process from University
Kuala Lumpur Malaysian Institute of Chemical and Biochemical Engineering
Technology.
EDUCATION
Educational Background
Name of Institution Field of Study
Grade/C
GPA
Graduation
Date
University Kuala Lumpur
(MICET)
BACHELOR OF CHEMICAL
ENGINEERING
TECHNOLOGY IN PROCESS
3.02 2014
Kolej Mara Kulim (KMK)
FOUNDATION IN SCIENCE
AND TECHNOLOGY
3.06 2009
2. WORKING EXPERIENCE
Working Experience
BRIGHT INTEGRITY Sdn. Bhd
Executive Controller
(From April/2016 – Now)
Duties and responsibilities:
Supervises and coordinates activities of MATERIAL COORDINATORS engaged in
expediting flow of material, parts, and assembles within or between departments of
industrial plant.
Operates the DCS control console to coordinates and regulate process variables and to
direct flow of various process and utility streams according to prescribe schedule.
Read processing schedules, operating logs, test result of sample, and laboratory
recommendations to determine changes in required controls to produce specified
quantity and quality of product.
Set control to adjust process variables such as flows, temperature, level and pressure
(both positive and vacuum pressure).
Coordinate the start-up, shut-down (normal and emergency) and normal operations
with field operator in charge.
To take full responsibility of the shift in terms of management of staff, management
of production and quality targets and to ensure the smooth running of the production
processes.
To take full responsibility of the quality and product that is produced within the shift
in line with the companies’ quality systems, processes and procedures.
To ensure that Health and Safety rules and regulations are adhered to during the shift
and all matters relating to this are dealt with using the resources within the company
in line with the companies Health and Safety policy.
Problem solving and troubleshooting skills are used to ensure that all team members
can identify root causes and take fast effective action to resolve the problems in hand.
To work closely with other DCS/Shift Supervisors to ensure production
handovers/turnover are effective communication tools.
Testing and verification of newly repair equipment with the consent of engineering
department or personal in charge.
Inspect all the operating units to ensure that all are functioning and to maintain
maximum efficiency.
LERENO Sdn. Bhd
Process Controller
(From September/2014 – July/2015)
Duties and responsibilities:
1. DCS controlling and monitoring. Monitor and maintain the whole process for every
unit in plant and make sure it at optimum level. This including flow, temperature,
pressure and level.
2. Study the whole process of the biodiesel and glycerin production including start-up
and shut down based on safety operation procedure (SOP).
3. 3. Control the settings to make necessary adjustments on equipment units involving
speed of chemical reaction, quality or yields.
4. Monitor instrument or equipment, flowmeter, panel light or others indicator and alert
for warning signal to verify the process condition.
5. Record operating data such as process condition, test result or equipment reading.
6. Regulate or shutdown equipment during emergency situation.
7. Patrol work area to make sure that the plant run smoothly and not cause problem such
as overflowing.
8. Notify maintenance or other person in charge to identify and fix the malfunctioning
equipment.
9. Inspect all operating units to ensure that all are functioning and maintain at maximum
efficiency.
10. Make sure the processing oil is on spec. Low contamination and acid value.
11. Sounding expert. To measure the oil level inside the tank and compare it with the
level transmitter in DCS.
12. Conducting Pitch Drain. The process that was used to remove the formation of salt
during Glycerin purification process.
MTBE Malaysia Sdn. Bhd. (Petronas Subsidiaries)
Industrial Trainer
From January/2014 - May/2014
Duties and responsibilities:
1. Propane and propylene sampling. To check the purity of the feed and product.
2. Spent and regen catalyst sampling. To check the coke formation and the regen
ability.
3. Taken of Hydrogen Sulphide (H2S) reading. To make sure the reading in optimum
level. H2S high, high formation of coke. H2S low, increase differential pressure.
4. Weighing of fine catalyst. This was conducted to check how many bids of catalyst
were escaped.
5. Line up and isolate heater. This was conduct to increase or decrease the temperature
of the heaters.
6. Conducting dumping process for spent caustic. Dumping it to spent caustic tank
before been treated.
7. Conducting survey for level and pressure gauge and transmitter. To compare the
reading between gauge with transmitter.
8. Taken of Hydrogen Chloride (HCL) reading. To test the ability/breakthru of the bed
inside the Chlorite Treater.
9. Conducting sampling point and hoses survey. To check the condition of the
sampling point and hoses in the plant.
10. Conducting Low Explosion Limit (LEL) check. To check the explosion level of the
area by using LEL meter.
4. SKILLS
Individual Skills
Management and leadership Interpersonal communication
Willingness to Learn Teamwork
Honesty and Integrity Problem-solving
Reliability and Responsibility Loyalty
Self-Confidence Ability to Work Without Supervision
Computer Skills
Microsoft Office Expert
Microsoft C++ Intermediate
DCS Expert
REFERENCES
References
Mohd Fadhil Mohamad Ali
Managing Director of BRIGHT
INTEGRITY Sdn. Bhd.
Level 29, Unit 29-6
Wisma UOA II, Jalan Pinang
50450 Kuala Lumpur, Malaysia
Tel: +603 2858 5578
Fax: +603 2300 2958
HP: +60176511289
Younis Jon Flores Alano
Production Manager of BRIGHT
INTEGRITY Sdn. Bhd.
Plot C3 (A/East) Lumut Port Industrial Park
Mukim Lumut, Jalan Kg. Acheh, 32000
Setiawan, Perak.
Tel: 05-6913018
HP: +60125398224