1. RYAN L. FOSTER
4801 Cedar Hammock ct.
Fort Myers, FL 33905
Cell: 239-738-0888 Home phone: 239-693-0029
E Email: ryriver69@yahoo.com
NCCCO CERTIFIED CRANE OPERATOR LBC, TWR, TLL, TSS, BTF, STC
QUALIFIED RIGGER AND SIGNAL PERSON
NCCCO CERTIFICATION NUMBER 100857466
CDL CLASS A F236-732-77-366-0
TANKER,DOUBLE /TRIPLE,HAZARDOUS MATERIALS
10 HOUR OSHA CONSTRUCTION SAFETY AND HEALTH TRAINING COURSE
AMERICAN RED CROSS
CPR/AED PROFESSIONAL RESCUERS & HEALTH CARE PROVIDERS CERT
TWIC CARD
PASSPORT UNITED STATES OF AMERICA
I’m an experienced crane operator with my certification with NCCCO, OSHA, ASME,
ANSI standards for my occupation and the way of safe work ethics. I have been on
various turn around job operating Manitowoc,Grove,Terex,Link
Belt,Tadano,Kobelco,Liebherr,ComeDil,Comansa,American friction
cranes for more than 10 years on all types of cranes & Equipment like Hammer Head
tower cranes , lattice crawlers, friction crane large hydro, small hydro, RT cranes. The
jobs have all been different from new construction high rise
buildings,to power plants, bridges ,chemical plants ,steel,taxi fleet
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
2. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
3. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
4. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
5. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
6. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
7. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
8. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
9. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
10. . Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
11. and turn arounds buildings ,houses, mobile homes ,cell huts, energized transmission
line work with power companies. I did the planning the size of cranes an d maintaining
the proper rigging to size of cranes and maintaining the proper rigging to size of the
loads for crane lifts per job site.
Knowing how to rigging a load and how it will affect the crane once the crane has the
weight of the load. I would like to work for a great company that is well established in
the crane industry and help the company in any way possible to completely satisfy the
customer and the company.Maintain a safe work place making sure the job was done
safely in a productive manner keeping the people and jobs equipment running safe and
on a schedule.
. Crane operator for 10 years lifting needs up to 800 tons.
. Set high standards for my occupation and way of safety enforced
. work ethics with heavy movements and transportation.
Sales and rentals representative for 12 years.
. Complete daily, weekly, bi-weekly, monthly, yearly inspections.
. Mechanical abilities with equipment and electrical wiring diagrams.
. Completed many different types of lifts like fly tables, fly shear walls big
and small, unload steel, and stack tractor truck trailers on top of each other.
. Fly man basket with people in it and know what the regulations and
codes are for man basket.
. Crane Training Operator Network.
. Completed NCCCO crane classes at Crane Tech in Tampa FL.
. Rigging experience includes but not limited to industrial needs in the
erection of cranes.
. Technical knowledge includes the operating needs for the Hammer head
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
12. tower crane, lattice boom crawlers, friction crane, conventional / tower
truck, tower mounted large and small hydro, rough terrain and all terrain
cranes.
Also friction rigs up to 4100 Manitowoc ringers American.
. Able to perform job function very safely.
. Able to work a clean safe work area.
. Know safe rigging of equipment and materials to meet OSHA and ASME
regulations.
. Able to train new members and provide leadership and motivation to
them.
. Computer experience with software and hardware.
. Twic Card is a high security clearance for power plants, airports and ship
yard ports.
. I received a 5 year safe driving award at UPS.
Experience
Barcelona Equipment
12850 34th st.. N Clearwater, FL 33762
Phone Joe 904-222-1931 727-561-9200
Nov 2014 - 2015
$38.00 Hourly $100 daily premium
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
13. I built the 8 stores of Golisano Children Hospital building in Fort Myers FL
with precast forms. The weights of the precast forms where 25,800 to
6,000. I had to roll the forms sometimes to get the picking points in the right
area to set the precast forms properly. The Load cell don't work on the
crane most of the job so I had to be really safe and use my experience
when making a pick. I was the crane operator on the manitowoc triple 888
luffer with 120’ feet of main boom and 140’ feet of luffer with a 2 part block
good for 59,000 and the single part whipline good for 29,500. Some of the
other lifts I made with the crane where fly concrete bucket,sheet metal,
welding machine, pipe, steel, stack truck trailer one on another. I also did
all the maintenance greasing weekly,monthly. I also was the crane operator
on a 90 Ton R/T Grove building a parking garage. I did all the lifts on the
job like unload trucks set steel,set colums. fly anything they needed for the
first floor also built aluminum tables for the 2nd threw 5th storeys they
brought a 4100 manitowac crawler crane for the rest of the building.
Austin Commercial, LP
P.O Box 2879 Dallas, TX 75221 USA P: 214-443-5700 $46.00 Hourly $80.00
daily per dium
4/2015 - 6/2015
I operated the 80 Ton Tadano R/T starting the new Marriott Hotel in Marco Island
Florida. I was setting steel & colum to be pored with concrete by bucket with the
Tadano crane. I helped organize the project with supplies like unloaded steel
from semi trailers. Gave a hand on job with what ever they needed to do that day.
Computer Sales & Web design
4801 Cedar Hammock ct.
Fort Myers, FL 33905
1-239-738-0888 - 1-239-693-0029
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
14. 01/2005 - 2015
I have a professional computer business that I run out of my own home on
the side for extra money. I sale products on eBay,amazon,craigslist,ext. I
also provide web design to customers that meet my expectations for a
business. I provide professional advice on how and where to stat with your
web design.I have a few websites at googleacloud.com I am always adding
to it.So keep checking back from time to time. I have computer skills on
hardware and software also programming with apple computers, PC
computers with excel.word,iCloud,one drive ext.
Baker Concrete Construction
900 North Graver Road
Monroe, Ohio 45050
1-513-539-4000
Nov. – Dec. 2012
Hourly $34.00 Per Diem $80.00 Daily
Operator of a Pioneer tower crane on several different jobs located in
Texas. I was a swing operator on three different job sites. One was an
Exxon Oil facility with16 other tower cranes working together at one time.
We always had to know where and what the other tower cranes were doing
because we were in swinging radius of each other. We had lift plans for
each day. The second tower crane job was job was a 12 story building. It
was right down town close to a lot of structures, power lines, people, roads
with cars traveling in the middle of downtown Houston, Texas.
ZACHRY INDUSTRIAL
527 Logwood
SanAntonio, TX 78221
F1-877-560-4084
August 2012
Hourly $34.00 PerDiem $65.00 daily
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
15. I operated two all-terrain cranes. On one of FPL new power plant projects
in W.Palm Beach, FL. It was a very tight job with 8 cranes operating at one
time. Most of the time I was in the lay down yard feeding the job all the
different pieces to the plant; smaller Hershey sections, stack sections of
steel and other parts and pieces to the power plant. Helped erect the bigger
cranes for the heavy lifts. Operated a70 Ton RT Grove and a 65 ton Link
belt.
HUNTER CRANE
1360 NW 33RD ST.
Pompano FL, 33064
Ron 1-954-818-3135
hourly $36.00 $ 100.00 per diem daily
Feb 2012 – Aug 2012
Operator of Comansa Lin 440 Tower Crane building Three story motel in beautiful down
townNaples Florida. Some of the picks where unloading steel from trucks and placing
the steel in the areas for the crew members to continue with job also had block forks
and unloaded trucks of block and put the block inside the build in the right area. Had
pallets of wood come in on trucks to form Colum’s and sections of building and along
with more materials and tools. Wright nowwe are waiting for some bids to come in so we
can start building more building in this beautiful downtown naples florida .
STROM ENGINEERING CORPORATION
10505 Wayzata BLVD.
Minnetonka, MN 55305
1-952-544-8644
$25.00 hourly+ per diem $85.00 daily
Jan-2012
I worked at the Manitowoc factory in Wisconsin where they build most of there
Manitowoc cranes along with Grove. I was with the crane operator and rigging
group. My job was to erect the new cranes for the first time and test the cranes
for load capacity tests and go through all the cranes confegerations & fuctions
and make sure the computer software and hardware are working correctly in
each model. Now we also put together the struceture of the crane for top to
bottom checking for every nut and bolt to fit properly in place along with the rest
of crane. Most of the time I set at the controls operating the crane lessening for
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
16. the next function to be tested. Manitowoc really takes good care of there cranes
and employees. The Manitowoc and Grove crane have the best engineers in the
world and I feel proud any time I operate a Grove or Manitowoc crane.
American Bridge Company
1000 American Bridge way
Coraopolis, PA 15108
!-813-254-4127 1-412-631-1000
Hourly $ 30.00 per dium $100 daily
Oct 10 -2011 - Dec 25 2011
Platt street job repair I operator 22 ton broderson grove crane for company
onbridge repair. I pored concrete in bucket. Also did work in man basket on
side andbottom of bridge also moved pipe, railing and moved concrete and
aluminum light poles.
TRADESMEN INTERNATIONAL
9760 Shepard Rd.
Macedonia, OH 44056
1-440-349-3432 1-407-854-7801
Kenneth wood
Hourly $32.00 per Diem $100 daily
July-1-2011
I worked full time for Tradesmen in Tampa FL. I operated an 18 ton grove
crane rebuilding parts of a bridge. Some of the work I did was lifting the
man basket, pour concrete with bucket,
set steel. Also set concrete railing forms for sides of bridge. I kept records
of crane maintence and did all maintence for crane.
DILLARD SMITH CONSTRUCTION COMPANY
2723 17th street East
Palmetto, FL. 34221
1-941-721-3400 Mr. Blum
July -2010
Hourly $29.50 per diem $ 85.00
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
17. Crane operator truck driver and loader, skedster operator and some other equipment as
needed.This job was a transmition distribution line job. That’s when we replace the
hardware, wire and poles . I helped move the equipment around the work area to
improve their work environment. Iwould make sure all the parts where accounted for
and in the right area. Did maintenance and operated the equipment to get the job done
and also clean up the job area and prepared for next area to be worked on.
ZEIGER CRANE RENTAL INC.
4651 Dyer Blvd.
Riviera Beach FL. 33407
1-800-785-5005 Mr. Bo
Hourly $32.50 per diem $100 daily
May – 2010
In South Carolina I operated a 50 Ton RT TEREX hydro crane at the federal navy base.
Most of the time I was moving the crane around the job to position the crane in the
safest area for a lift to be performed .I was lifting brace poles, steel, supplies for the job,
whatever they needed to prepare for the next tilt walls to be set in place. I did all the
maintenance for the crane and made sure all the rigging is in good condition and be
looking for any damage to any of it.
BAXTER CRANE
P.O. Box 62066
Fort Myers FL, 33906
239-229-5273 Supervisor: Mark Proskauer
Salary and Commission
Jan.-09 - Dec.09
Sales rep for LTD4000 Eagle Hoisting Platform Transform Deck. Did alot of searching
on the internet for building projects big and small. I would email and talk with company
owner’s supervisors contractors,foremen, superintendents, ect. to present to them the
new LTD4000 Eagle Hoisting Platform Transform Deck and how this equipment will
save them time and money on new and old buildings.
BILL BRANCH CHEVROLET
3980 Fowler St.
Fort Myers, FL. 33901
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
18. 239-936-1810 Supervisor: Dean Snell
Salary and Commission
April 2008 - June 2008
Sales rep responsible for new and used cars sales. Completed in-house sales tranning.
ALL CRANE RENTAL OF FLORIDA
10614 Highway 92 East
Tampa, FL 33610
Supervisor: Robert Suza 1-206-953-9939
Hourly $28.00 per Diem $100 daily
Aug-07- Oct 07
Crane operator of various cranes. To name a few the Manitowoc lattice boom crawler
triple 777,888,999, Manitowoc 2250,16000 series one configuration was with luffing jib
and the other was with jib off set or just working of main boom. One of the jobs was
operating the Manitowoc triple 777 with 280' of main boom building the Jackson
Memorial Hospital in Miami fl. The building was made out of precast forms that would
come in on trailers daily with anywhere from1 to 5 pieces on each trailer. There were
also crane jobs to like Operating Grove 70 ton RT, 700E, RT 760 E also 70 ton linkbelt
hydro operating on the job with the power company setting new poles and removing the
old power poles and loading them on a trailer or off to the side in a safe place to be
picked up at a later time . I did trusses for houses and I also worked with the erection
crew sometimes I would truck parts of the crane to and from the job. Me and the crew
would work most of the day and night putting the crane together or taking it down and
moving the crane to the next job
LEWIS EQUIPMENT
1212 Shady Oak Lane
Grand Prairie, Texas
Supervisor: Robert Suza 1-206-953-9939
Hourly $45.00 per diem $100.00
January 2007- August 2007
Operator of Tower cranes ComeDil 561/531, Liebherr 200 LC,440 Comansa Lin and
lattice boom crawler with luffer or jib on small and large telescopic boom truck cranes.
Fly tables, fly shear walls big and small, fly steel, fly man basket, jack pumps for next
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
19. floor, fly concrete buckets, fly pole shores, precast forms and a lot of other materials for
building a high rise up to 33 stores. Also jumped tower crane to next level every couple
of monthes. I maintenance the tower cranes mechanical & electrical and oiled as
needed. Inspection report daily, weekly , Biweekly, monthly and yearly. Managed 30-45
workers in crews from tower crane daily also worked with second tower crane next to
me within swing distance so I always had to know where all the cranes where at all
times. Some days there were also small & large hydro cranes on the ground .I Keep job
site running smooth and safe. Assembled the tower cranes and did all required testing
and setting limit switches and buffers. All work was done independently. Always
keep a watch at what kind of weather conditions for the day and always keep close with
the crew and warn them of conditions so that way where a team and look out for one
another.
SIMS CRANE & EQUIPMENT
2535 6th Street West
Lehigh Acres, FL 33907
Supervisor: Alan Johnson 239-369-1000
Hourly $ 17.50
June 2005 – December 2005
Truck driver, crane operator, Oiler, Rigger, Mechanic and delivering & assembling
crawlers and truck cranes at job site and oiled and did rigging for a lot of different
cranes jobs like Power plants, precast forms, communication towers, cell huts,
factories,tilt wall ,houses, condos, roads,steel buildings and many more.
UNITED PARCEL SERVICE
2901 Cargo Street
Fort Myers, FL 33901
239-332-0050 Supervisor: Bill Cox
Hourly $26.80
Nov-96-April-05
Package truck driver delivered packages to local businesses and residential in a timely
and professional manner. Other responsibilities included delivering certain packages on
time for the service the customer paid for. Pick up costumes packages at a certain time
daily with proper paper word. Also loading/unloading, sorting, scanning ,packing
packages ,tagging loading or unloading a package truck. In my early years I was one of
the tractor trailer shifters going and switching trailers on the dock keeping the sort
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
20. running smooth. Airport operations on Saturdays we would go to the airport and sort,
load and delivered are Saturday air packages to their customers.Contract Sales to
obtain new customers.CDL with double and triple endorsements
Education
Local union member crane training
Crane Training Operator Network
Crane Tech Tampa FL courses
Red Cross Certified CPR,AED,Professional Rescuer
10 HOUR OSHA Construction Safety and Health
courses
2008 Edison
College –
basic courses
Riverdale High
School, Fort
Myers, Florida.
Alva Middle
School Fort
Myers, Florida
Orange River
Elementary
Skills &
Licenses
1. CDL
CLASS A
Endorsements,
tanker, doubles
and triple
trailers.
2. NCCCO,
TLL, TWR.
3. Twic Card
4. OSHA 10
hour
Construction
Safety and
Health
5. Crane
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.
21. operator training
6. Computer skills Certificate for word,
excel.Microwsoft excel,PC hardware
knowledge
and Apple computer
hardware&software knowledge
7. Operation of backhoe, bull dozer,
skedster, excavating equipment,
loader operator,
and forklift.
8. Intimate knowledge of the Lee
County area and the united stated.
9. Excellent customer service and
communication skills.
10. All conference baseball for pitcher.
11. Certificate of completion National
bartenders and Casino Games and
hospitality school.
Reference• Available on request.
. Driving piles by vibration or diesel drive or drilling as well Rigging
experience including but not limited to heavey industrial needs in the
erection of cranes.