1. Résumé of James HawkinsRésumé of James Hawkins
Mobile : 0427 026 925
Email: jameshawkins05@yahoo.com.au
5 Harbinger Court
Nerang, QLD 4211
INTRODUCTION
To whom it my concern;
I have been on barrow island working for MAS (AGC group)
on the CB&I & Kent’s joint venture. This was a short term
project. On the project I was on the mechanical installation
team Woking on the gas compression trains. We worked with
structural steel drawings. We were installing heavy structural
steel, gantry cranes, walkways, stairs, grid mesh, platforms &
hand railing systems & pipe supports this all had to be stick
built, we also worked on the mixed refrigerant compressors
and propane compressors, the enclosure for the compressors
& also laser motor alignments including soft foot alignment on
compressor helper motors, pump motors & fan motors to
name a few.
Before this I was a leading hand working at Giovenco
Industries Curtis Island for Bechtel on the gas train compressor
system that compressors gas to a liquid at the rate of 600lt to
1lt. I looking after a nine-man crew doing P&id mark-up, Line
identification, QA, Line walk downs, Punch listing, redline
mark-up’s, Diagnostics of piping vales & instrumentation
throughout a functional gas plant under the permit to work
system.
Previous to this I was a leading hand working at East coast
Development Engineering between Dalby & Roma in the gas
industry doing gas gathering, shutdown works and redesign of
piping installation works under the permit to work systems in
field compressor stations with in the area between Dalby &
Roma. We installing well head separator packages, as well as
Resume of James Hawkins 0427 026 925 Page 1 of 8

2. Piping and Instrumentation, Commissioning pressure testing
gas & hydro, installing well head double block & bleeds, Also
the hydraulic pump & water separator unit’s this consists of
using the QGC permit to work system, QGC Isolation systems,
Commissioning & LAAR’S.
I am a Trade Qualified Mechanical Fitter Engineering. I have
Extensive experience in Construction heavy industrial, Gas
plant operations, Metal fabrication, Piping & Instrumentation,
Commissioning, Isolations, P&id mark ups, Line walk downs,
Punch listing, & Production engineering.
My career objective is to work in a progressive organisation &
be part of a team culture that promotes safety, development
& open communication to further my experience & skill set in
my chosen career, also demonstrate to an employer how my
abilities can be of value to their business.
Previous to this I was at Condabri at the water treatment
facility for Leighton’s / Origin as a leading hand mechanical
fitter, which includes staff development, Redlining, P&id mark-
up’s, ISO tracking, Rl positioning, Motor alignment, Actuated
& manual valve fitment & alignment, may press & George
fisher products, Hydro testing, Commissioning, Piping &
instrumentation, permit to work systems Leighton’s & Origin,
lock out tag out, to name a few.
I am a very skilled tradesman with extensive knowledge
across various trades.
Licences / Tickets / Professional Development
Certificate lll Engineering Mechanical (fitting & turning)
Night shift supervisor
Leading hand Leighton’s (Condabri & ready creek)
Leading hand Giovenco (Curtis island aplng)
Team leader (EDE)
Elevated Work Platform over 11mtrs (EWP)
Working at heights
LF Forklift licence
4x4 drivers training (RACQ & AUSTRALIAN 4X4)
Resume of James Hawkins 0427 026 925 Page 2 of 8

3. Permit accepter & issuer (LEIGHTONS)
Permit accepter (Bechtel)
Permit accepter (QGC / EDE & ORIGIN)
Lockout tag out course (Leighton’s, Origin, QGC, EDE)
Hydrostatic & gas testing officer
Advanced gas testing officer
Isolation officer (QGC & EDE)
Commissioning
MISC Card
CPR Course
First Aid
Current QLD ‘C’ Class Driver’s Licence
White card (201300130)
Fire safety course
On seen controller course
May press course
Cold Fusion welding course (George fisher)
Pipeline technician course
Isometric drawing course
P&id’s drawing course
Time management coarse
Leighton’s Induction (Condabri & Ready Creek)
Origin Induction module 0, 1, 2 (Condabri & Ready Creek)
QGC Induction (Kumbarilla Park & Woleebee Creek)
EDE Induction
Exceptional problem solving skills
Workshop safety officer
OHS General Safety Induction (Construction industry)
Overhead crane (3 ton)
Overhead crane (4 ton)
Overhead crane (5 ton)
Key Strengths and Skills:
Site / Manufacturing , maintenance Skills in the heavy
industrial sector:
• Over 10 years Experience in Project management, within the heavy
industrial sector of manufacturing & maintenance of industrial
caravans, CGC mobile camps semi trailer & also skid mounted camps
and trailers including Government tenders. Including estimating,
Workforce management, Maintenance management, Design
management, Production management, Able to run multiple projects
simultaneously and handover to client.
• Over 20 years Experience in the Mechanical trade including, race
engines, engines, diesel engines, gearboxes, diffs, hydraulics,
Resume of James Hawkins 0427 026 925 Page 3 of 8

4. compressed air, auto electrical, trailers including semitrailers &
multifitment.
• Over 20 years of experience in the Maintenance management,
maintenance & Premaintenance of heavy industrial, fixed plant
machinery, machinery, forklifts, excavators, bobcats, frontend loaders,
cars, trucks, semi-trailers & trailers.
• Over 20 years Experience in light industrial sector Sheet metal
fabrication- stainless steel, aluminum, galvanized, zinc & black steel
including design, cutting, folding & welding with MIG, TIG, Oxy and Arc.
• Over 12 years Experience in auto electrical trucks, trailers, forklifts,
caravans & excavators.
• 7 years Experience in generator, maintenance, fitment, wiring (single
pole & double pole) & noise reduction.
• 5 years’ experience in heavy industrial Maintenance management of
mining camps. (over 14 mobile camps with 6 semi trailers in each
camp) Day to day running of maintenance staff for field work.
• 4 years’ Experience in commutations including cat5, cat6, remote aerial
internet yagi & 3g, rg213, rg6, rg8, rg58, patch panel & telescopic aerial
brackets.
• Supervisor / leading hand for Leighton’s pty ltd
• Able to train Manage, supervise & place staff into the most suitable
position, I am very diversified in many trades.
• 7 years’ Experience in Pipe Fitting/ Plumbing – sullage tanks, macerator
pumps, electric toilets, pipe work, grey water, black water, gas, tank
installations & design.
• 7years Experience in Electrical –design following wiring diagrams, ruff ins
fit-off, generators, solar installation and inverters, Electrical in 3phase,
240 volts (single & double pole) & 12volt.
• Shop fitting- design layout, cool rooms, stainless steel & timber fitment.
• Procurement officer, Stock control- ordering & store man work.
• Highly experienced- in design, marking out (dumpy & laser levels)
reading plans, iso’s, rl’s, pnid’s, following diagrams, fault finding, design
improvement, training and quality control.
• Staff management skills- including recruitment, rostering, time
management and training.
• Strong knowledge- in the safe use and selection of fixed plant,
machinery, hand and power tools.
Resume of James Hawkins 0427 026 925 Page 4 of 8

5. • Excellent understanding of and commitment to workplace health and
safety.
• Computer skills; Experience in multiple programs, MS Word, Excel, quick
books and email to name a few.
Personal Attributes:
• Excellent verbal, written and interpersonal communication skills.
• Phenomenal time management and organisational skills with the ability
to prioritise tasks and meet deadlines in high pressure work
environments.
• The ability to work effectively in a team environment or independently.
• Able to talk to management, tradies & staff all on different levels.
• Always striving to learn and apply new skills in my work.
• Self motivated approach with a strong work ethic and high personal
integrity
Employment History:
7/2015 – 1/2016
Leading hand mechanical fitter/Pipefitter: at giovenco industries at
Curtis Island for Bechtel.
At Gio I am a leading hand of a nine-man crew doing p&id mark-up,
line identification, QA, line walk downs, diagnostics of piping vales &
instrumentation throughout a functional gas plant.
4/2014 – 7/2015
Mechanical Fitter/Pipe Fitter East coast Development Engineering
At EDE I work in a team environment of 6-person crew building well
heads.
We install double block & bleeds for the well heads under the permit
system, also the construction of the well gas separator’s. This involves
commissioning, iso drawings placement & fitment of pumps & pipework,
hydraulic pump station, water separator, solar panels & wiring also the
fencing off of the well head. This is done across a lot of different sites
from Dalby to Roma.
3/2013 – 4/2014
Mechanical Fitter/Pipe Fitter Leading Hand/night shift supervisor
Leighton’s pty ltd, Condabri & Reedy Creek
Summary of role:
Resume of James Hawkins 0427 026 925 Page 5 of 8

6. At Leighton’s I am leading hand / supervisor of 20 employees, Tradesman &
trades assistants. We are building a water treatment facility located at
Condabri & Reedy Creek in the Surat basin.
We install Switch Room Buildings, Large Transfer Pumps, Steel work,
Containment tanks & A Mammoth amount of Fiberglass pipe (GRP), Stainless
steel pipe (May press) & Pvc pipe (George Fisher). Fitment of associate valves,
bellows, flanges, rings, supports & cradles
This includes commissioning, Isometric drawings, RL’s, Northerlies & Easterlies.
Red lining, also Redesign & mapping out of pipe work & pump position.
Achievements:
Working close with management & engineering team to fix problems
that arise on a day to day basis.
Been Able to get the work group to work as a team.
Great Safety record part of a team with 2’000’000 man hours without a
lost time injury.
7/2006 – 3/2013
Workshop Manager
Tray Mark Industrial Caravans, Currumbin QLD
Summary of role:
Tray Mark designs, manufactures and supplies industrial caravans and mining
accommodation including site offices, tool rooms and lunch rooms. Clients
include SANTOS, Geokinetics, Origin Energy, QLD Rail, Major Drilling, Coal Gas
Camps, Savannah, Government and private sector businesses throughout
QLD, NSW and SA.
As workshop Manager, I am responsible for supervising and project managing
all manufacturing in the following sections; cabinet making, shop fitting,
structural steel work, sheet metal, plumbing and electrical, and am employed
as the Safety Officer.
Duties include:
• Management – Supervision of 35 full-time staff plus sub-contractors (up
to 50 staff in total during peak production), relief manager in the heavy
industrial section, workflow management including scheduling and
production ordering.
• Deadlines, rostering and training of staff, quoting of upcoming jobs and
tenders.
• Manufacturing – Reading of plans and client specifications, liaising with
designer to make improvements and troubleshoot drawings, ordering of
materials, allocating jobs to staff, assisting staff in each section with
manufacturing including welding, fabrication, plumbing and electrical.
Resume of James Hawkins 0427 026 925 Page 6 of 8

7. • Quality Assurance – checking completed work of tradesmen for quality
fit-outs for electrical and air-conditioning, plumbing, gas-fitting,
cabinets, shop-fitting, metal fabrication.
Achievements:
• Improved output from 14 trailers per annum to 75 trailers per annum
whilst managing multiple million dollar contracts simultaneously
7/2000 – 6/2006
Proprietor
Ezy-Bak Trailers Pty Ltd, Burleigh Heads QLD
Summary of role:
Ezy-Bak Trailers was my own business which manufactured custom made
trailers, car trailers and racing trailers. My role was responsible for all aspects of
running a small business, manufacturing and managing a small team of
fabricators.
Duties included:
• Manufacturing – receiving client specifications, designing of plans,
quoting of jobs, metal fabrication and welding, panel beating and
spray painting, fit-outs of custom trailers, quality assurance, arranging
delivery of completed trailers
• Management – supervising staff, managing workflow, responding to
customer enquiries, business development
• HR functions – advertising and recruitment of staff, performance
management, training, rostering and payroll
• Business administration – accounts payable and receivable, BAS, PAYG
tax, superannuation, ordering of stock, stock control
Achievements:
• Creating a new business from inception to a highly reputable business
with a repeat customer base
10/1997 – 7/2000
Leading Hand / Programmer
Precision Cam Drives P/L & Romac Performance Products, Sumner Park QLD
Summary of role:
Commencing as a programmer and then promoted to leading hand, I was
responsible for the production of racing engines, differentials and gearbox
components, milled from CNC machines.
Duties included:
• Operation and programming of CNC milling machines with Fanuc
controllers
• Supervision and training of staff as leading hand in the workshop
• Preparation and maintenance of equipment to ensure precision
machining
• Troubleshooting and liaising with management and clients
Achievements:
• Improved the efficiency of a work process and reduced work time from
45 minutes to only 4 minutes by creating a new tooling method
Resume of James Hawkins 0427 026 925 Page 7 of 8

8. Referees:
Jason Rudman supervisor CB&I Kent’s 0412 657 981
Tony
Jenkins superintendent Giovenco 0408932973
Clint cairns mech supervisor Giovenco 0402 573 641
Theunis boshoff mech supervisor EDE 0459 669 222
Andy Luscombe supervisor Leighton’s 0455 283 341
Shane poulter electrical supervisor tray mark 0404 016 673
Robert Bloomfield carpentry supervisor tray mark 0410 669 001
Resume of James Hawkins 0427 026 925 Page 8 of 8