Hydraulic dock ramp is a modern enterprise commonly used auxiliary handling equipment, simple operation, high efficiency, used and station terminals, warehouses, logistics platforms and other places.

1. Hydraulic Ramps safety rules
Hydraulic dock ramp is a modern enterprise commonly used auxiliary handling equipment,
simple operation, high efficiency, used and station terminals, warehouses, logistics platforms and
other places. Thing has two sides, usually using Ramps should pay attention to safety, to follow
the procedures. Here are some of the provisions of a hydraulic dock leveler safety rules:
First, non-corporate professional or a designated officer is prohibited to operate this loading
ramp.
Second, rainy day, prohibited the boarding operation with this device, to prevent slipping and
generate security incidents.
third, were boarding operation, you should first check Ramps all parts without exception. Ramps
and then placed Kongkuo, safe place, and the corresponding required handling of containers, car
safety after a good butt, in good safety cushion beneath wagon wheels wooden triangle.
Fourth, the power is loading dock ramp, turn on the power switch and the hydraulic cylinder
valve, press Ramps front cylinder lift button, adjust height after good Ramps Close cylinder valve;
then the middle of the cylinder Ramps adjustment to the appropriate height
five, ramps between truck safety chain leash, and produce to prevent accidents when loading and
unloading trucks, cabinets and Ramps detachment.
Sixth, on the front flap Ramps lap in the car plate placed on the ground after the flap.

2. Seven were boarding job, unrelated persons shall not enter the workplace; truck drivers can not
enter the cab of the vehicle; forklift drivers, should focus on the spirit, in strict accordance with
"Truck Safety Operation" operation.
Eight, boarding operations, such as warning lights flicker, it means that there is a gap between the
truck and the widening Ramps, please check, adjust and then conduct operations.
Nine, after boarding the job is complete, the operator should be collected, collated site tools and
instruments, will be moved to storage areas Ramps company policy prohibits arbitrarily placed.
Ten, use, such as abnormal situation, the operator should immediately stop boarding operations
and inform electromechanical safety department for maintenance.