1. ROGER L. BECK
SR. MECHANICAL DESIGNER/CADD ENGINEER
7035 Angelo Ln.
Gilroy, Ca 95020
Phone: (408) 757-3171
E-mail: beck.roger@gmail.com
PRIMARY SKILLS:
Frames, Skins, Gas lines, Forelines, Sheetmetal design, Top level tool design, Machined parts
PRIMARY INDUSTRIES WORKED
• Semiconductor
• Heating tools
• Medical
• Fiber Optics
• Mainframe Computers
• Optics
CADD EXPERIENCE:
Pro-Engineer and Wildfire 2.0 – 5.0, Using Intralink and PDMLink, Wildfire 5.0 with PDMLink 9, Creo-Pro-
Engineer.
KLA-Tencor Mechanical Design Engineer Feb 16 to Sep 16
• Redesign parts of frame and associated parts to adapt a new UI and new cooling unit to optimize recovery
time after a panel was opened. Designed a water overflow containment unit for the cooler. Redesigned doors
to incorporate hinges for easier access and incorporate new interlock switches.
NORTHROP GRUMAN Drafter Aug 15 to Sep 15
• Creating models from sketches.
• Performing ECO tasks.
AIXTRON, INC. Sr. Mechanical Designer FEB 14 TO JAN 15
• Designed Frame, Skins, Water Manifold, Gas Lines, etc. for a new process module in addition to a new Gas
Box Enclosure and Controls box for both systems to increase throughput by 10X.
• Designed a frame and skins for a pre-clean module.
• Worked with vendors for cost reduction and manufacturability of frame and skins.
• Was also responsible for the top level assy to ensure fit and compatibility for all components.
NOVELLUS SYSTEMS, INC./LAM RESEARCH SR. MECHANICAL DESIGNER JAN 12 TO JAN 14
• Working on a new multi station wafer handler system for two different customers, one for the rest of the
world, one for a specific customer requiring unique specifications.
• Designing the EFEM’s and Back End Frames, Skins, Floor Tiles and an access ladder.
• Responsible for the top level assembly and keeping everyone updated on changes for a more seamless design.
Requiring customer input to design to their specifications and following through to give them their tool.
This was done to improve throughput and cost of ownership.
• Designed multiple iterations of end effectors for a new robot. Designed a wafer carrier to use 300MM wafers
in new 450MM processing tools.

2. CROSSING AUTOMATION CADD ENGINEER SEP 11 TO JAN 12
• Working with Pro-E and PDMLink 9.1 to design and detail assembly, test, and reliability tooling for a
450MM Pod loader (FOUP Loader, Loadport etc.) to confirm functionality, reliability and conformance to
SEMI standards.
• Design, detail and test various injection molded, sheetmetal and machined parts for the aforementioned Pod
loader.
• Using Solidworks to design a lift mechanism to install 300MM Pod Buffer on top of EFEM after tool
installation at customer site. (Tool was too tall to ship).
NOVELLUS SYSTEMS, INC. CADD ENGINEER JUL 10 TO SEP 11
• Designed Frame, Skins, and Facilities Interfaces, Plumbing and various parts and assemblies for a Gapfill
Process Module in the HDP end of the business.
• Working on insulators for hi-rf systems.
GENERAL DYNAMICS CADD ENGINEER MAR 09 TO JUN 10
• Working with Pro-E Wildfire 2.0 to recreate lost parts, assemblies and drawings.
• Designed, documented and released several sub-system units for use on a ground based satellite receiving
station.
NOVELLUS SYSTEMS, INC. APR 97 TO DEC 08
CADD ENGINEER 3/07 – 12/08
SR. MECHANICAL DESIGNER
• Working with Pro-Engineer to design and detail components for a new 300mm Wafer Transfer Module.
• Used Pro-Sheetmetal to design the Frame, Skins, Brackets and various parts.
• Using Piping to design Vacuum and Gas Lines.
• Worked with manufacturing on any issues they had.
• Worked on CIP on various tools to improve the tool and improve manufacturing process.
• Listed as company technical expert on Frames and Skins.
• Worked with Cardinal Paint to develop a custom color of Powder paint.
• Worked with Cardinal Paint to develop a Static Dissipative Powder paint.
METCAL INC. MECHANICAL DESIGNER/DRAFTER/CHECKER OCT 92 TO APR 97
• Working with Pro-Engineer and Autocad 13 to design and detail parts and complex assemblies for a
soldering system power supply and associated accessories utilizing:
o Aluminum castings
o Injection moldings
o Machined parts
o Manufacturing tooling for assembly.
• Using Autocad 12, designed, detailed and checked a variety of mechanical assemblies.
• Designed and detailed sheetmetal parts for a cooking grill.
IDENTIX INC. MECHANICAL DESIGNER/DRAFTER/CHECKER JAN 91 TO JAN 92
• Designed sheetmetal, machined and injection molded parts for electronic fingerprint scanning and recording
devices, including a fingerprint scanning system for law enforcement and the FBI.
• Designed and detailed assembly and test fixture to aid in production, assembly, test and quality control.
Previous Experience:
Various places and jobs
Please ask for more details if desired.