The document describes performing a slump cone test on a mixture of Fendolite MII fireproofing material and water. The mixture was created by mixing 20 kg of Fendolite MII with 15-19 liters of water for 3 minutes. The mixture was then poured into an empty 1 liter container and allowed to slump after removing the container, with the desired slump reading being between 40-55 mm. The observed slump of the sample described was 50 mm.
1. FIRE PROOFING SLUMP CONE TEST
Fendolite MII (20 kg) & water (15 to 19 litres) being mixed in mixer
2. FIRE PROOFING SLUMP CONE TEST
Mixing for 3 minutes the
mixture of Fendolite MII &
water in mixer
After 3 minutes of mixing time,
Fendolite MII & water mixture sample
removed from mixer into bucket for
slump cone test
3. FIRE PROOFING SLUMP CONE TEST
Pouring the Fendolite MII & water mixture sample in empty 1 litre container
4. FIRE PROOFING SLUMP CONE TEST
Pouring the Fendolite MII & water mixture sample in 1 litre container
5. FIRE PROOFING SLUMP CONE TEST
Fully poured Fendolite MII & water mixture
sample in 1 litre container.
Scraping off the excess sample
upto the brim level
6. FIRE PROOFING SLUMP CONE TEST
Gradually lifting & removing the 1 litre container allowing Fendolite
MII & water mixture sample to slump.
7. FIRE PROOFING SLUMP CONE TEST
From centre of Fendolite MII & water mixture sample to plastic container brim
the slump reading should be within 40 to 55 mm. Observed slump 50 mm.