2. Alatas Hong Kong
Alatas has been in Hong Kong since
2005 and we are providing technical
services to owners and operators of
deck-cranes, offshore-cranes, mobile
cranes and construction cranes.
Our workshop is set up to give us
the flexibility to provide repairs for
components of cranes in the shortest
possible time and to get cranes back into
operation a.s.a.p.
This is complemented by our on-site
service team performing installations,
trouble-shooting and testing on site,
around the clock, in and out of Hong
Kong.
Where spare parts are required we have
our dedicated spare parts sourcing team
and a network of Alatas service stations
all over the world with established
connections to many of the major
component makers.
Alatas operates according toTotal Quality Management (TQM) principles
This means we have documented working procedures for everything we do and
we continuously improve these procedures
It also means that we test every repair before delivery
3. Hydraulic Repairs
Alatas Hong Kong’s Hydraulic Workshop
is fully equipped with an automated
test-stand capable of testing pumps and
motors up to 200kW.
Also automated are our lapping tables, this
ensures that otherwise tedious manual
work is completed by machines and to the
highest possible standards.
We only use original spare parts for
our repairs and overhauls and with a
exstensive stock of spares we can also
offer short turnover times of 1 to 2 days.
With base units for many common pump
and motor models in stock, along with
the necessary parts to configure most
variations, we are able to offer very short
delivery times for complete units.
In addition to axial piston units we repair
radial piston units, vane type units, valves
and valve blocks.
We repair components from the following
makers using only original spare parts.
4. Electronic Components Repair
In the electronic repair workshop we repair
everything “electronic”.
This includes PCB’s from control systems
for cranes, but also standard electronics
like Amplifiers, DC/DC Converters, Power
Supplies, PLC cards, Variable Frequency
Drives.
Our state of the art diagnostic equipment
allows us to perform:
• VI tests (active and passive components)
• Circuit tracing
• Identification of IC’s and CPU’s from a
library of over 50,000 elements
• Comparison of PCB response to
previous tests
• Thermographic imaging for temperature
related matters
PCB’s will also be renewed by shot-blasting
and applying new lacquer to reinstate the
insulation properties.
Repairs will be tested on simulators or
in bench tests and a repair report will be
available.
Thermographic imaging is used to
diagnose heat-related problems.
5. Gearbox Repairs Specialist
Successful gearbox repairs and overhauls
require high standards of workmanship
and a strict attitude to quality.
We have the expertise, flexibility and the
tools to carry out such professional repairs
of gearboxes.
In our gearbox workshop we repair:
• Winches
• Distributor gearboxes
• Travelling gearboxes
• Slewing gearboxes
• Torque Converters
• Rotators and Swivel Joints
Where original gearbox spares are not
available anymore, we can provide high
quality replacements from our precision
machining shop in Europe.
Frequently a problem are damages to cast
gearbox housings, in such cases we will be
able to offer a welding construction as a
replacement.
6. We Also Provide...
SPARE PARTS SUPPLY
BY A WELL CONNECTED SOURCING TEAM
ENGINEERING & DESIGN
Our spare parts engineers are able to supply hydraulic parts, mechanical parts
and electronic parts from around the world. With a network of global offices
we can source “locally”.
Established relationships with most components manufacturers speed up
communication and the offering process.
Where replacements are needed we can involve our experts in each field for
technical advice. Parts supply includes complete booms and operators cabins,
joysticks and limit switches, track parts and load moment limiting systems,
engines and wire ropes.
Our Design Team in Austria is able to carry out structural calculations and
FEM-analysis for new designs, modifications, structural repairs and welding
procedures. Compliant with class requirements.
We also offer consultative advice and re-certification.
In addition to our structural design team are our experts for hydraulic system,
new designs, modification and control system specialists.
Allowing us to meet our clients needs when it comes to flexible and professional
technical solutions.
Our Service Engineers can attend on-site to Mechanical, Electrical and
Hydraulic problems at short notice.They are experienced inTrouble-shooting,
On-site Repairs, Regular Inspection Regimes and Large Scale Commissioning
Projects.
In line with our quality policies we prepare detailed Service Plans for larger
scale projects and Regular Inspection Schemes.
We have mobile oil filtering systems, remote control load cells, data-logging
tools and various bolt tensioning tools available, designed for on-site use.
ON-SITE SERVICES
7. GANTRY AND EOT CRANES
55t DUTY CYCLE EOT CRANE
30t GANTRY CRANE
2 x 10t EOT CRANES
3.2t ROPE HOIST
Alatas are the distributor and service provider for GH gantry and EOT cranes
8. MIDDLE EAST
Jebel Ali Free Zone - South
P.O. Box 263 007
Dubai, United Arab Emirates
Tel: +971 4 885 7954
Fax: +971 4 885 7229
dubai@alatas.ae
USA / PANAMA
Houston Office, 22015 South Frwy
Manvel,Texas
77578 USA
Tel: +1 281 431 0707
Fax: +1 281 431 0799
houston@alatas.com.us
UK / AFRICA
Arthur Drive
Hoo Farm Ind Est
Kidderminster DY11 7RA UK
Tel: +44 1562 747050
Fax: +44 1562 747053
uk@alatas.com
HONG KONG
2203 Winning Centre
29TaiYau Street, San Po Kong
Kowloon, Hong Kong
Tel: +852 2153 2153
Fax: +852 2153 2163
hongkong@alatas.com.hk
GERMANY
Sachsenring 11 D-27711
Osterholz-Scharmbeck
Bremen, Germany
Tel: +49 4795 957 1460
Fax: +49 4795 957 4102
germany@alatas.net
SINGAPORE
1 International Business Park
#03-01EThe Synergy
Singapore 609917
Tel: +65 6861 2336
Fax: +65 6861 6261
singapore@alatas.com.sg
www.alatas.com
