2. 2 // Engineering and Product Solutions Contact us: 13 15 52 | technical@coateshire.com.au
At Coates Hire, we offer not only the highest quality equipment, we equip our customers with the
best expertise in the industry. We can provide expert advice on evaluating the risks associated with
equipment supply, performance and operation. Our Engineering Services Team offers
comprehensive technical support and we can assist in the concept and design of all engineering
solutions. All of which ensures that your site is always performing to its full potential.
Our unique ability to provide total equipment solutions helps you drive both time and cost
efficiencies. We have the expertise to ensure you have everything you need, anytime you need it. So
no matter how big or small your project is, you can count on Coates Hire to help make it happen.
• Commitment to Safety: We are passionately
commited to safety, helping deliver your
project on time whilst ensuring you’re
meeting duty of care obligations.
• 130 Years’ Experience: We have a track
record that spans every market sector,
helping to deliver successful projects across
a wide range of industries
• Project Support: Over 600 branch managers,
field sales and product specialists are
committed to providing complete solutions
to your specific project needs.
• Industry Leading Customer Service: At
Coates Hire we take customer service
seriously and ensure we are continually
improving your experience.
• Engineering and Technical: Our dedicated
team of experts can provide technical
solution, design, certification and installation
services for temporary works requirements.
• R&D Capabilities: Our research,
development & innovation arm constantly
strives to find new and better solutions,
systems and equipment for our customers.
OUR EXPERTISE:
3. // 3 Engineering and Product Solutions
Technical and Engineering Solutions
At Coates Hire, we have been providing a wide range of specialist equipment and services for over 130
years. We pride ourselves in providing much more than just our product range. Our specialist solutions
team has a wealth of experience in the provision of:
• Traditional trench shoring
• Specialist excavation temporary works
• Structural propping solutions
• Synchronised jacking
• Traffic management
• Ground water management
• Water treatment solutions
Our aim is to meet our customers’ productivity, safety, environmental and cost management
expectations.
Our equipment offering is supported by a highly trained and motivated team of qualified engineers,
Regional Sales Engineers and Product Specialists. These experts are assisted by knowledgeable hire teams
based at specialist supply depots throughout Australia.
Coates Hire has a solid reputation for quality and service, whilst ensuring we meet all of our legislative
requirements. No job is too large or too small, we have the equipment and expertise to add value to any
construction project and we look forward to servicing your needs.
4. 4 // Engineering and Product Solutions Contact us: 13 15 52 | technical@coateshire.com.au
Safety
• Safety is embodied in everything we do and we work closely with our customers to create the safest
working environments
• All products and engineering work we do is compliant with relevant Australian Standards
• ‘Safety in Design’ is incorporated into all of our engineering solutions
• Our engineers are all members of Engineers Australia with qualification to NER RPEQ status
• Our safety related products, such as the new Shoring, Access and Egress solutions along with Handrails
and Trench Davit systems are NATA accredited and compliant to Australian Standards
Engineering & Technical Services
At Coates Hire, we aim to supply cost effective custom designed solutions for all our specialist product
areas and in particular projects where temporary works play a key part in the construction process.
To achieve this we have set up a team of fully qualified structural, civil, mechanical and environmental
engineers with many years of industry experience to work with our clients at all stages in the project
process from design right through to commissioning and handover.
This enables us to support our clients, along with their consultants and contractors, delivering the best and
most cost effective engineering solution for their project.
We can now support you at the very early planning stage, manage the installation process via a range of
turnkey solutions and also provide engineering sign off for designs and installed schemes when needed.
We provide full project support, which includes a team of qualified experts offering support and advice
ranging from simple enquiries to highly complex project challenges.
5. // 5 Engineering and Product Solutions
Key capabilities of the design service
ü Full Temporary Works support packages, including
installation services for shoring, propping, traffic and
water management solutions
ü Well presented, design solutions using the latest CAD
software
ü Method statements, both generic and scheme specific,
pictorial or written word
ü Tender support packages for estimators and planning
functions including schemes and budget costing
ü Support for site teams to develop best solutions and
cost effective design options to keep within timescales
and budget expectations
ü Risk Assessments both generic and scheme specific
ü Safety in design
ü Competitive pricing solutions
ü Develop safe and sustainable solutions
ü Training and coaching of site staff in all products via
a range of tool box talks and ongoing support to help
keep projects on track and provide safest possible
working environment
ü Advice and support on installation and extraction
techniques
ü Engineering design sign off and installed equipment
sign off available both internal and third party
PARTS LIST
PART NUMBERQTYITEM
STANDARD TILT PROP167
SYSTEM-30-BEAM-2000368
SYSTEM-30-BEAM-100049
SYS30-JACK ASSEMBLY810
SYSTEM 30-SH RACK BRACKET ASSY411
SYSTEM-30-BEAM-05001212
SYSTEM-30-END CONNECTOR1213
6 m x 2.4 m Steel Road Plate 32 mm thick214
Hard Wood Full Sleeper- 200 x 100 , 2400 long2016
1
1
2
2
3
3
4
4
A A
B B
C C
D D
RMS, Southern Road Service Concept
S.Raina
22/03/2013
This design is the property of COATES HIRE Ltd. A.B.N 99 074 126 971
STANDARD DISCLAIMER
THE ADVICE PROVIDED IN THIS DOCUMENT (TOGETHER WITH ANY DRAWINGS, IF APPLICABLE) HAS BEEN PREPARED AND DESIGNED, BASED
SOLELY UPON THE INFORMATION, WEIGHT, LOAD BEARING DATA, SURFACE CONDITIONS AND THE REQUIRED USE OR PURPOSE PROVIDED
BY THE CUSTOMER. COATES HIRE HAS NOT, NOR WAS IT REQUIRED BY THE CUSTOMER, TO VERIFY THE ACCURACY OF ANY INFORMATION
OR DATA PROVIDED.
IT IS STRONGLY RECOMMENDED THAT THE CUSTOMER OBTAIN INDEPENDANT ADVICE AND A REVIEW OF THE MATERIAL AND INFORMATION
CONTAINED IN THIS DOCUMENT.
COATES HIRE DOES NOT WARRANT THE ADVICE AND MATERIAL CONTAINED IN THE DOCUMENT AS SUITABLE FOR ANY OTHER PURPOSE OR
EVENT OTHER THAN THOSE PURPOSES OR EVENTS PROVIDED BY THE CUSTOMER. COATES HIRE DENIES ANY LIABILITY IN THE CASE OF
DAMAGE TO PROPERTY OR INJURY TO PEOPLE CAUSED THROUGH THE INCORRECT OR IMPROPER USE OF THE ADVICE OR MATERIAL
CONTAINED IN THIS DOCUMENT OR IF THE ADVICE WAS USED FOR A PURPOSE OTHER THAN THAT SPECIFIED BY THE CUSTOMER TO COATES
HIRE.
SUBJECT TO ANY OTHER TERMS OR CONDITIONS CONTAINED WITH THE SUPPLY OF THIS SERVICE, LIABILITY OF COATES HIRE ARISING FROM
THIS ADVICE (INCLUDING NEGLIGENCE) IS LIMITED TO FIVE TIMES THE FEES PAID FOR THE PROVISION OF THIS SERVICE.
Drawn By
Drawing Number
Date
BU
Thornes Bridge Support
Concept ( four required)
CLIENT
NOTES
-All connections for System 30 must be fastened using 4 of M18 nuts, bolts & washers
positioned in the corner holes.
-For connecting Tilt Props, use 1 of M18 Nut & Bolt on each end
-Please note that this drawing is issued for confirming dimensions only.
The foot pint and the height of the tower will be changed according to the dimensions required.
Parts list shows all components required to construct 1 complete tower as shown.
Four of these will be required, two on eac side.
- The Qty required will change if the dimensions are changed dimensions.
PLAN VIEW
FRONT ELEVATION SIDE ELEVATION
ISOMETRIC
5000
4690
6000
2400
400-610
7000400-610
100
32
10
9
8
12
7
11
14
16
1.0m EXT. 5.0m EXTENSION 3.0m EXTENSION
1.0
m
EX
T.
5.0m
EX
TE
NS
IO
N
3.0m
EX
TE
NS
IO
N
1.0
m
EX
T.
5.0m
EX
TE
NS
IO
N
3.0m
EX
TE
NS
IO
N
HY
DR
AU
LIC
RA
M
1.5m
EX
T.
5.0m
EX
TE
NS
IO
N
HYDRAULIC RAM 1.5m EXT.5.0m EXTENSION
HY
DR
AU
LIC
RA
M
1.5m
EX
T.
5.0m
EX
TE
NS
IO
N
ALL DIMENSIONS ARE IN mm
DISCLAIMER
1. This design is provided to You subject to the Coates Hire Terms of Hire and
Special Conditions as amended from time to time.
2. Any designs, calculations, drawings, specifications and sketches produced by
Us for You are prepared solely on the information supplied by You and We are
not responsible for the accuracy of the details contained therein.
3. All designs, calculations, drawings, specifications and sketches produced by
Us are indicative only and are prepared for the sole purpose of assisting You in
assessing and comparing quotations.
4. You acknowledge and agree that We are not liable for any loss or damage
arising from the use of such designs, calculations, drawings, specifications and
sketches. You indemnify Us against all liability, claims, damage, loss, costs and
expenses (including, without limitation, legal fees, costs and disbursements on
a full indemnity basis, whether incurred or awarded against Us and any
environmental loss, cost, damage or expense) in respect of:
(a) personal injury;
(b) damage to tangible property; or
(c) any claim of direct or indirect loss or damage by a third party, in relation to
Your use or reliance on the designs, calculations, drawings, specifications and
sketches produced by Us.
5. You warrant that You will seek Your own independent advice from a qualified
professional in relation to the proper installation and use of the Propping
Equipment for Your required purpose. Prior to the hire, You must advise us of
your Propping Equipment requirements upon receipt of advice from the
qualified professional, including any proposed alterations and adjustments the
qualified professional requires to any designs, calculations, drawings,
specifications and sketches provided by Us.
6. You acknowledge that We have made the operating and safety instructions
for the Propping Equipment You have hired available to You to read.
7. Subject to clause 16 of the Terms of Hire and the general waiver of liability
contained therein, We are additionally excluded from all liability related to the
hire and use of the Propping Equipment by You, including, but not limited to,
liability arising from:
(a) damage to all adjacent or surrounding structures and
(b) damage to utilities or services.
NOTES
1. All bracing components to be restrained with
hanging chains connected at the positions
indicated in this drawing.
2. Frame 1 & 2 to be restrained directly to the top of
the sheet pile.
3. Frame 3 to be restrained directly to the underside
of Frame 2.
4. Suitable edge protection to be supplied by the
contractor.
5. Suitable means of access/ egress to be supplied by
the contractor.
6. Appropriate site specific risk assessments should
be performed by the contractor prior to
commencement of any work.
7. This design has NOT been certified
HANGING CHAINS
(To be attached at these
locations in accordance with
the installation instructions)
HANGING CHAINS 18 No.
Mega Brace Hydraulic Ram
Mega Brace 3.0m Beam Extension
Mega Brace 5.0m Beam Extension
Mega Brace 1.5m Beam Extension
Mega Brace 1.0m Beam Extension
Mega Brace 10.0m Beam Extension
Mega Brace 7.0m Beam Extension
1,120kg
410kg
585kg
760kg
1,120kg
1,475kg
2,008kg
Schedule of Weights: MEGA BRACE
Item Description Item Weight
Mega Shear Clamp 120kg
194kg
Schedule of Weights:TRENCH SHEETING
Item Description Item Weight
6.0m STS500/6 Trench Sheet
ISSUED FOR
CONSTRUCTION
Title
PROJECT NUMBER
Client
FAX: (02) 9829 2177PH: (02) 8796 5000
46 Williamson Road Ingleburn NSW 2565
www.coateshire.com.au
A.B.N: 99 074 126 971
REV DATE COMMENTS
A 19/10/13 PROPOSAL
DESIGNED DRAWN CHECKED DATE FIRST ISSUE
REVISIONDWG NUMBER
0 0.5 2mscale @
1:75
PAPER SIZE: A3 SCALE: AS INDICATED
1.51
B 21/10/13 PROPOSAL
C 18/12/13 PROPOSAL
D 18/03/14 ISSUED FOR CONSTRUCTION
6. 6 // Engineering and Product Solutions Contact us: 13 15 52 | technical@coateshire.com.au
Turnkey Solutions & Installation Model
Our turnkey solution began as a customer project site support offering, focusing on dewatering and
structural propping services. This includes not only the provision of engineering support and great product
solutions but also a team of qualified site engineers that can install the products safely and then support
the project at every stage up to completion.
We have decided to further develop the turnkey solutions model to other areas of our specialist product
portfolio and to enhance the offering by building a team of fully trained and accredited riggers and
engineers that can project manage from conceptual designs through to installation.
Qualified Project Managers oversee the process from start to finish and with the full support of our
engineering team we can now partner with our customers to supply an exceptional and unique installation
service. This single point of contact streamlines the process and means we can react quickly to fulfil
customer expectations.
Our engineers are able to sign off installations and quickly manage any variations to an agreeable outcome,
reducing down time and speeding up processes. This provides our customers with great value and peace of
mind knowing that a single source solution is eliminating the need for multiple contractors on the project
to achieve the same goal, reducing valuable down time and saving time and money along the way.
7. // 7 Engineering and Product Solutions
Specialist Products and Services
• Largest range of structural propping equipment in Australia, with national branch footprint
• Fleet consisting of Acrow Props, Tilt Props, Titan Props, Tri-shores and Heavy Duty System props, along
with all associated products
• Ongoing support from design through to site installation
• Widest and largest fleet of Standard Shoring equipment available in Australia through a specialist
branch network
• Includes light weight Aluminium Shoring boxes, light duty and heavy duty Steel range of shoring boxes
with both ‘Digging’ and ‘Shield’ types available
• Super high strength range of SBH Slide Rail trenching solutions capable of supporting linear
trenches and standard excavations up to 9m deep and 9m wide dependent on construction method
and soil types
• A unique and fully NATA accredited range of Access, Egress and trench safety equipment, including
Hand Rails, Fall Arrest and Rescue Davit solutions, all products designed and compliant to Australian
standards
STRUCTURAL PROPPING
STANDARD SHORING
8. 8 // Engineering and Product Solutions Contact us: 13 15 52 | technical@coateshire.com.au
Specialist Products and Services
HYDRAULIC SHORING
• High strength large span Hydraulic perimeter shoring frames ideally suited to support large scale
excavations for the construction of Tank Farms, Water Holding Structures, large scale Manholes,
cofferdams and excavations associated with infrastructure projects
• Range of high strength Hydraulic tubular Shoring props suited to complement our range of heavy
duty perimeter systems or work independently to support major construction excavations such as
underground basements, large infrastructure Cofferdams and major water related excavations such as
pumping stations
• Combinations and solutions are endless and only restricted by engineering design loads. Our 250 ton
capacity Hydraulic shoring prop can span in excess of 40m across the site
• Turnkey solutions can be offered for more difficult installations
• Hydraulic Shoring products can be pre-stressed as part of the installation process to limit the deflection
in the supported wall
• Loads can be monitored inside the props via latest technology Telemetry systems, giving peace of mind
for both contractors and their clients
9. // 9 Engineering and Product Solutions
We provide expertise and equipment to safely control lifting and weighing of heavy structures, especially
major infrastructure assets and mining equipment:
• Our synchronous jacking system provides one of the safest methods of lifting and lowering heavy
assets
• High degree of accuracy and rapid productivity
• Centre of gravity and weight functionality
• User friendly software with out of tolerance alarms and data recording capabilities
• Controls uneven distribution of loads
• End-to-end solutions with project site support
Coates Hire has a range of options to treat waste water.
Our products generally require a small footprint while
maintaining discharge quality and managing cost
expectations. Our water management plans are bespoke
to individual site requirements. We base our designs on
achieving the ANZECC water guidelines and therefore
meet state and national legislation requirements for
water discharge. We offer basic water treatment solutions
to advance systems that have primary, secondary and
tertiary treatment regimes. We can facilitate the removal
of metals, Organics, Non-Organic compounds
(Hydrocarbons), basic pH correction and more.
Our latest product offering is an all in one CEPT water
treatment unit that provides data logging and deals with
the most difficult applications.
• Sediment Control units
• Turbidity Control units
• pH Dosing units
• Reverse Osmosis
• Modular and Scalable Water Treatment Systems
• Water management plans (ANZECC Compliant)
• Hydrologist and Environmental Engineers
Specialist Products and Services
SYNCHRONISED JACKING
WATER TREATMENT
10. 10 //Engineering and Product Solutions Contact us: 13 15 52 | technical@coateshire.com.au
Coates Hire look to supply cutting edge latest technology equipment along with the best engineering
support for our customers.
It is our goal to continue this approach through the introduction of new products to extract the water as
efficiently as possible and treat that water before discharging to an agreed source. We understand
sensitivities of environmental matters and that more emphasis is being placed on water treatment prior to
discharge. With this in mind, the Specialist Water Management team have searched the globe for best in
class products to provide this service to the market. Coupled with an experienced installation team in each
State, and Hydrologists in the engineering team to develop ‘Water Plans’ to satisfy stringent legislation we
truly can provide exceptional packages in this space.
• Specialists in Well Point dewatering, Sump Pumping and deep well construction
• Mine dewatering
• Horizontal dewatering capabilities
• Water Diversions and Sewer Bypass
• 24 hour management
• Water Treatment packages
• Solutions including design, approvals, specification, installation and management
• Data Logging/ Remote Telemetry
Specialist Products and Services
PUMPS & WATER MANAGEMENT
TRAFFIC MANAGEMENT
Our range of Steel, Concrete and Plastic road barriers is the most
comprehensive and up to date available in today’s market. With
enormous fleet holdings, no job is too large for our Traffic
Management team. Our dedicated traffic team, survey, design and
install for any application from specialist branches located
throughout Australia. Our range of complimentary products such as
Message Boards and Barrier Fencing Panels provide the complete
service for your project and our teams of installation engineers will
even lay them too.
• Traffic barriers, concrete, steel and plastic, including crash cushion
• Delineators
• Traffic lights, Variable Message Boards and Truck Mounted
Attenuators (TMA’s)
• Traffic - Plates, Bridges & Grids
• Temporary Fencing
• CCTV Cameras/Traffic Sensors
11. // 11 Engineering and Product Solutions
Access
Air & Air Accessories
Compaction
Concrete & Masonry
Earthmoving
Floor and Cleaning Equipment
Generators & Power Distribution
Industrial tools & Equipment
Ladders & Scaffold
Landscaping
Lift & Shift
Lighting
Materials Handling
Portable Buildings & Toilets
Propping
Pumps & Fluid Management
Shoring
Tools & Equipment
Traffic Management
Training (RTO)
Trucks, Vehicles & Trailers
Welding
COATES HIRE’S AVAILABLE PRODUCT RANGE:
At Coates Hire, you’ll find an unmatched range of equipment, available and ready to hire.
We stock Australia’s largest fleet from general hire gear and specialist products, to total site solutions.
With the largest branch network in Australia, you are backed by one of the country’s largest delivery
networks.
12. WhileCoatesHiremakeseveryefforttosupplytheequipment
described and pictured in this brochure, all equipment
offered is subject to availability. Should Coates Hire through
whatever circumstances need to offer an alternative make
or model, customers can be assured that this will be of the
same quality as the item shown or displayed in this brochure.
All information about equipment in this brochure is to the
best of our knowledge correct, but we would urge customers
to check all details at the time of hire or enquiry. Coates Hire
reserves the right to change information without prior notice.
