FAGERHULT | Fagerhult 2015 2016 catalogue

Indoor & Outdoor 2015–2016
lighting solutions

The catalogue was produced by Fagerhults Belysning. We reserve against any errors and we reserve
the right to make changes in the collection.
Contents
112–177
178–221
222–261
372–389
342–371
262–341
10–111
390–421
422–431
432–465
466–
recessed
downlights
system & spotlights
industrial
architectural
pendant/surface
emergency
bollards
amenity lighting
technical info
Luminaires for suspended and surface
mounted installation.
Luminaires for recessed installation.
Downlights for recessed or
surface mounted installation.
Post tops and floodlights for illuminating
green areas, entrances, parks and pedes-
trian or cycle paths.
Technical information – lighting planning,
light control, etc.
Luminaires for industrial environments.
Track and luminaires for system
installation and accent lighting.
Luminaires and products for
emergency lighting solutions.
Bollards for lighting pathways,
entrances and parks.
Decorative luminaires.
wall & ceiling Wall and ceiling luminaires for surface
mounting and recessed installation in
outdoor environments.

2
Light is everything
What is light? It helps us to see and dis-
cover, it wakes us up in the morning and
keep us attentive during the day. Light also
raises emotions. The feeling of security in a
well-lit exterior space, alert in a workspace
or energised in the staff room.
With smart control and energy efficient
fixtures, we produce lighting that comple-
ments the natural light, that steps in when
the sun is absent. Our research shows that
artificial light and ambient light can pro-
vide the same alertness as the sun. In the
workplace or in a classroom offering great
opportunities for creating creative environ-
ments where people thrive. By using effi-
cient and comfortable LED solutions we can
also achieve a sustainable lit environment.
With light and human needs in focus,
we create indoor and outdoor lighting
solutions for the present and the future.
Because light is our passion and our drive.

4
References of light
Finnair Headquarters, Helsinki, Finland
The new Finnair Headquarters was built with a firm focus
on energy performance, resulting in an LEED Gold certifi-
cate. Presence and daylight controls contributed towards an
ultra-efficient workplace, where nine suspended Freedoms
provided the centre-piece of the design.
Fagerhult has supplied lighting solutions for a variety of public environments
around the world. Here we proudly present some of them. Be inspired and see
more lighting possibilities on our website.
Photo: Sini Pennanen

5
The Bünting Group, Nortmoor, Germany
The Bünting Group's new central building in Germany
houses approximately 400 workspaces within 16 000 square
meters of office space across three floors. The lighting expe-
rience from 568 Appareos, provides both ambient and task
lighting, complemented with automatic light controls fulfills
the requirements for efficiency as well as ergonomics.
Microbiology Laboratory & Pathology,
Hengelo, the Netherlands
The Microbiology Laboratory & Pathology in Hengelo wanted
an exterior lighting solution which would add a decorative
element to building while still providing functionality and
security within the parking yard, realised through a combina-
tion of Rondo and Conledo.

6
Psykiatrins Hus, Uppsala, Sweden
Western Transit Shed, London,
the United Kingdom
Leading M&E consultants Hoare Lea’s multi-award winning
new office, in the new Kings Cross Central development, is an
ideal showcase for their approach to aesthetic sustainable
lighting design. Tibi pendants add a touch of glamour to their
meet-and-greet spaces with the offices lit by iTrack Dual for a
flexible and glare-free lighting solution.
Green, purple, turquoise and orange – Psykiatrins Hus is a
dynamic experience of light and colour. Fagerhults award
winning Avion created pockets of individual spaces within
the open-plan office environment.
Photo: Redshift Photography

7
Egedal, Copenhagen, Denmark
Arag Legal Expenses Insurance,
Leusden, the Netherlands
Embracing the Activity-Based-Office concept the new interior
at the Dutch insurance company Arag utilised a mixture of
T5, LED and compact fluorescent luminaires, optimised with
DALI, for an efficient and easily adaptable lighting solution.
When the street lighting in Egedal municipality near the
Danish capital Copenhagen needed to be replaced, the
choice fell on the LED luminaire Vialume 1 with light control.
The Nordic design, the visual comfort and the energy
efficiency were of great importance to the customer.
Photo: Bigandt Fotografi

8
Thales Nederland B.V., Hengelo,
the Netherlands
The renovation of the Thales Netherlands headquarters
has complimented the buildings striking design. Colour and
indirect lighting was an essential aspect of the concept,
developed through a close collaboration between the
architects, technicians and Fagerhult. By using a mixture of
Tigris, Pleiad G3 and Tibi luminaires an exciting, playful and
natural building was created.

9
Tågaborgs School, Helsingborg, Sweden
Nowy Styl, Moscow, Russia
Office, showroom, meeting room, the furniture company Nowy
Styl wanted a versatile space based on a concept of eco, natural
and inspiring. A wide range of Fagerhult luminaires, including
Avion and Wrap, are controlled by motion sensitive DALI which
enhances the showroom experience.
Tågaborgs school is located in a long established residential
area. For the outdoor lighting the requirements on Fagerhult
as a supplier were glare-free lighting that not only lights up
the schoolyard, but also withstands rough play during day-
time. For the facades and entrances, Rondo G2 Power were
chosen. For a homogeneous impression, Rondo G2 Power post
top fittings were installed on the schoolyard.

Pendant/Surface
Luminaires for suspended and surface mounted installation
Closs
IP 20 p. 50–59
Avion
IP  20 p. 40–46
Basic T5
IP 20 p. 110–111
Classic
IP 20 p. 28–29
Combiform
IP 20 p. 90–92
DTI
IP 20 p. 60–69
Diva II
IP 20 p. 109
Indigo Clivus
IP 44 p. 93–95
Excis
IP 20 p. 96–98
Lento
IP 20 p. 106–108
Loop Light
IP 20 p. 78–89
Notor G2
IP 20 p. 34–39
Sektor
IP 20 p. 105
Open Box
IP 20 p. 48–49
Tigris
IP 20 p. 75–77
Wrap
IP 20 p. 22–26
Vidi
IP 20 p. 100–104
Ten° Line
IP 20 p. 70–74
Appareo intro 12–13
Appareo 14–15
Avion intro 40–41
Avion 20 45
Avion 50 44
Avion 80 43
Avion 100 42
Avion accessories 46
Basic T5 intro 110
Basic T5 111
Classic intro 28
Classic 29
Closs intro 50–51
Closs Beta direct 52
Closs Beta direct/indirect 53
Closs Delta direct 54
Closs Delta direct/indirect 55
Closs Terazza direct 56
Closs Terazza direct/indirect 57
Closs accessories 58–59
Combiform intro 90
Combiform Beta 91
Combiform accessories 92
Combilume intro 16–17
Combilume direct 19
Combilume direct/indirect 18
Combilume ceiling 20
Combilume wall 21
Diva II 109
DTI intro 60–61
DTI type 1 Beta 62
DTI type 1 Lamell 64
DTI type 1 Terazza 63
DTI type 2 Beta 65
DTI type 2 Terazza 66
DTI type 3 Beta 67
DTI type 3 Lamell 68
DTI accessories 69
Excis intro 96–97
Excis 98
Indigo Clivus intro 93
Indigo Clivus Beta 94
Indigo Clivus Delta 95
Lento intro 106
Lento 107
Lento accessories 108
Loop Light intro 78–79
Loop Light Beta 80
Loop Light Gamma 81
Loop Light Honeycomb 84
Loop Light Indirect 85
Loop Light Lamell 83
Loop Light Spacers 86
Loop Light System 87
Loop Light Terazza 82
Loop Light accessories 88–89
Notor intro 30
Notor G2 intro 34
Notor LED intro 31
Notor G2 ceiling 38
Notor G2 direct 35
Notor G2 direct/indirect 36
Notor G2 indirect 37
Notor G2 accessories 39
Notor LED 32
Notor LED accessories 33
Open Box intro 48
Open Box 49
Sektor 105
Ten° Line intro 70–71
Ten° Line Beta 72
Ten° Line Lamell 73
Ten° Line accessories 74
Tigris intro 75
Tigris Beta 76
Tigris Delta 77
Vidi intro 100–101
Vidi 1 102
Vidi 2 103
Vidi 3 104
Wrap intro 22–23
Wrap direct 25
Wrap direct/indirect 26
Wrap LED 24
Appareo
IP 20 p. 12–15
Combilume
IP 20 p. 16–21
Notor LED
IP 20 p. 30–33
11www.fagerhult.com • www.fagerhult.co.uk
pendant/surface

12 www.fagerhult.com • www.fagerhult.co.uk
Appareo
Designed by Howl Design Studio
The luminaire is lit but where is the light source? Appareo
is a suspended luminaire which maximises the design
flexibility offered by LED’s – without compromising on the
requirements for efficiency and ergonomics.
The starting point was a new type of
prismatic acrylic diffuser which acts as
both the reflector and the louvre. The
light is distributed indirectly towards the
ceiling and directly down towards the work
surface, providing the ambient and task
lighting levels demanded in contemporary
office spaces.
Unlit the transparent acrylic screen is
housed with a slender aluminium frame for
the height of discretion. When lit, the LEDs
positioned across the slide of the luminaire
bring the screen to life, increasing the
opacity and guiding the light for an optimal
visual experience. The result is a fresh, crisp
light that does not dazzle.

523
1255
374
28
444
38
99
Ballast box
1164
283
1106
Installation
Two-point wire pendant. Wire sus-
pension and friction lock included
with luminaire. Balanced. External
driver box is mounted directly to cei-
ling or placed loosely above ceiling.
Connection
Luminaire is connected via remote
LED driver, 230 V. Cable entry on top
or through the knockout in the side.
Snap-in terminal block 5⊗2.5 mm²,
1-phase through-wiring possible.
The luminaire is equipped with a
1.5 m mains cable 3⊗0.75 mm²
between the luminaire and the
external driver box.
Design
Luminaire body in extruded
aluminium and ends in cast metal.
The luminaire is lacquered in black
(RAL 9005) structured or white
(RAL 9016) structured. Driver box in
plastic.
Louvre
Edge-lit clear prismatic acrylic dif-
fuser (PMMA). Average luminance
<3000 cd/m².
Dimming
DALI or e-Sense ActiLume as stan-
dard.
Miscellaneous
Appareo has side-emitting LEDs,
as a result the luminaire’s acrylic
diffuser is completely transparent
when switched off and provides an
evenly luminated surface when lit.
The distance between the luminaire
and the driver can be increased to
10 metres if required.
e-Sense ActiLume is integrated into the
ends of the luminaire.
Appareo
Luminaire
System, W Colour temp., K Light distr. Luminous flux, lm Efficiency, lm/W kg White Black
65 4000 40/60 5210 80 4.7 11070- 11071- ■
Luminaire must be completed with desired function. See table with suffix codes.
For current information on output and luminous flux, please refer to our website.
Suffix code
■ -402 DALI/Phase-pulse control
■ -442 e-Sense ActiLume single luminaire
Add suffix code to the end of the luminaire part number to indicate
required function. Only one suffix can be added.
Information LED
Colour temp, (CCT) Ra (CRI) Life Colour quality
4000 K ≥ 80 L70 50.000 h MacAdam 4 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.

523
675
31
330
2500
444
38
99
Ballast box566
Installation
Wire suspension (4 m) with ceiling
bracket and friction lock, is included
with the luminaire. External driver
box is mounted directly to ceiling or
placed loosely above ceiling.
Connection
Luminaire is connected via remote
LED driver, 230 V. Cable entry on top
or through the knockout in the side.
Snap-in terminal block 5⊗2.5 mm²,
Supplied with a 3 m white fabric
cord between luminaire and exter-
nal driver box.
Design
Luminaire body in cast aluminium.
The luminaire is lacquered in black
(RAL 9005) structured or white
(RAL 9016) structured. Driver box in
plastic.
Louvre
Edge-lit clear prismatic acrylic dif-
fuser (PMMA). Average luminance
<3000 cd/m².
Dimming
DALI/Phase-pulse control as stan-
dard.
Miscellaneous
Appareo has side-emitting LEDs,
as a result the luminaire’s acrylic
diffuser is completely transparent
when switched off and provides an
evenly luminated surface when lit.
The distance between the luminaire
and the driver can be increased to
10 metres if required.
When switched off, the diffuser is
completely transparent.
Driver boxes can be placed above
ceilings or surface mounted directly to
the ceiling.
Appareo
Circular
Luminaire
System, W Colour temp., K Light distr. Luminous flux, lm Efficiency, lm/W kg White Black
55 4000 40/60 4747 86 4.6 53751-402 53752-402
Information LED
Colour temp, (CCT) Ra (CRI) Life Colour quality
4000 K ≥ 80 L70 50.000 h MacAdam 4 SDCM
pendant/surface

Combilume
Combilume is an inventive family of large surface area
luminaires designed so you can develop imaginative light
settings. Combilume is available in wall, ceiling or pendant
versions, with direct or indirect light, in a number of sizes.
Combine them together in creative clusters or use each
one as a separate light feature.
In Combilume, LED technology is really in
its element. The modern light technology
and side-emitting light diodes result in
pleasant, even surfaces both for individual
office work stations and for large rooms
where people come together.

523
Luminaire
System, W Colour temp., K Luminous flux, lm Efficiency, lm/W kg White Alu-grey
50 300⊗800 4000 4700 94 4.0 11908 11928 ■
63 300⊗800 2700–6500 4.0 11950 11951
Information LED
Colour temp. (CCT) Ra (CRI) Life Colour quality
4000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
600
33
382
832
Delta 300⊗800
Installation
Wire suspended via friction locks
secured to the luminaire. Wire
suspension ordered separately, see
Accessories.
Connection
Connections are made at the end of
the luminaire, see the dimensional
drawing. 5-way snap-in terminal
block at one end of the luminaire,
Design
Luminaire body of extruded alumin-
ium in white (RAL 9016) or alu-grey
(RAL 9006) textured enamel.
Louvre
Delta – microprism louvre in acrylic
(PMMA) with good optical charac-
teristics.
Miscellaneous
Combilume uses side emitting LED
technology for a glare-free light.
Luminaire with Tunable White
(2700–6500 K) is equipped with
driver DALI Device type 8.
Combilume Direct/indirect achieves
the required for 3000 cd/m² as per the
EN 12464-1 standard.
Despite its compact dimensions, the
technical solution is contained within
the frame.
Combilume
Direct/indirect
Suffix code
■ -448 e-Sense ActiLume single luminaire with 1 pull dim-cord
■ -449 DALI/Phase-pulse control, with 1 pull dim-cord
■ -458 e-Sense Connect
■ -457 e-Sense Connect with sensor
■ -459 e-Sense ActiLume master luminaire
Accessories
Complete wire suspension, ceiling cup and mains cable
3⊗1.0 mm². L=1.0 m.
Small + large ceiling cup, white/pair 94301
Large ceiling cups, white/pair 94444
Small + large ceiling cup for T-bars 25 mm, white/pair 94302
Large ceiling cups for T-bars 25 mm, white/pair 94445
5⊗1.0 mm². L=1.0 m.

1200
1218
380
36
1209 1218
600
660
660
630 660
523
Installation
secured to the luminaire. Wire
suspension ordered separately, see
Accessories.
Connection
Connection is made at the end of
drawing. 5-way snap-in terminal
Design
Louvre
teristics.
Opal – plate in frosted acrylic
(PMMA).
Miscellaneous
Combilume can be continuously
mounted.
The luminaire’s position can be easily
adjusted via friction locks.
Combilume
Direct
Luminaire
Opal
53 300⊗1200 3000 4400 83 8.0 11934 11944 ■
53 300⊗1200 4000 4400 83 8.0 11904 11924 ■
53 600⊗600 3000 4500 83 7.6 11935 11945 ■
53 600⊗600 4000 4500 83 7.6 11905 11925 ■
Delta
55 300⊗1200 3000 4700 86 8.0 11937 11947 ■ ●
55 300⊗1200 4000 4700 86 8.0 11907 11927 ■ ●
Information LED
3000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
4000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
Opal 300⊗1200 Delta 300⊗1200Opal 600⊗600
Suffix code
● -448 e-Sense ActiLume single luminaire with 1 pull dim-cord
● -458 e-Sense Connect
● -457 e-Sense Connect with sensor
● -459 e-Sense ActiLume master luminaire
Accessories
Continuous coupler 91136
Cluster connector for 4 pcs 600⊗600 luminaires 91137
3⊗1.0 mm². L=1.0 m.
5⊗1.0 mm². L=1.0 m.
pendant/surface

523
1218
380320
1130
565
660
572
36
660
36
380
320
572660
Installation
Surface mounted.
Connection
drawing. Option of cable entry in
the end caps and middle of the
luminaire. 5-way snap-in terminal
Design
Louvre
teristics.
(PMMA).
Miscellaneous
Combilume ceiling mounted with Delta
louvre .
Surface mounted connection cable
entry is possible at the side of the
luminaire .
Combilume
Ceiling
Information LED
3000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
4000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
Suffix code
Opal 300⊗1200 Delta 300⊗1200Opal 600⊗600
Luminaire
Opal
28 300⊗600 3000 2300 81 4.5 11931 11941 ■
28 300⊗600 4000 2300 81 4.5 11901 11921 ■
53 300⊗1200 3000 4400 83 9.9 11932 11942 ■
53 300⊗1200 4000 4400 83 9.9 11902 11922 ■
53 600⊗600 3000 4500 83 9.0 11933 11943 ■
53 600⊗600 4000 4500 83 9.0 11903 11923 ■
Delta
55 300⊗1200 3000 4700 86 9.9 11936 11946 ■ ●
55 300⊗1200 4000 4700 86 9.9 11906 11926 ■ ●

523
Luminaire
13 300⊗600 4000 1100 84 6.0 11909-402 11929-402
20 600⊗600 4000 1800 91 9.0 11910-402 11930-402
Information LED
4000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
36
380
320660
572660 572660
Opal 300⊗600 Opal 600⊗600
Installation
For wall installation.
Connection
drawing. Optional cable entry in the
end caps or middle of the luminaire.
5-way snap-in terminal block at
one end of the luminaire. Option of
1-phase through-wiring.
Design
Louvre
(PMMA).
Dimming
DALI/Phase-pulse control as
standard.
Miscellaneous
The frame is easily removed via an
insertion on the side.
Combilume
Wall
pendant/surface

Wrap
Designed by Ola Granlund and Leif Igelström
To replicate the experience of being in daylight you
need a luminaire that releases light from all direc-
tion. At the same time we should be able to influ-
ence the intensity of the light, since we all see in
different ways and have different tasks to complete.
Wrap addresses both of these requirements.
Wrap is an ideal solution for both gener-
al and working environments and other
public spaces. The suspended version
provides the desired combination of direct
and indirect light, either through separate
T5 light sources or LED. The luminaire can
be controlled, making it easy for the user to
adjust the light to their own requirements.
Wrap is also available in a ceiling model
for areas where a pendant solution is not
viable. Both pendant and ceiling luminaires
are available as either single or tandem
models with three different choices of lou-
vre, depending on the light source selected.

Wrap
2
1
3
5
2
43
2
5 6
1. Wrap is a range of luminaires available in a variety
of styles. The direct version has light slots on the
sides to create incidental light – a detail that pro-
vides visual comfort.
2. The T5 luminaire can be equipped with three
different louvre types; Beta, Lamell and Delta. The
LED version is Lamell only.
3. Wrap is mounted via sliding brackets. Both Wrap
Direct and Wrap Direct/indirect have these flexible
mounting points.
4. All connections take place in the end-caps of the
luminaire, facilitating easy installation without
needing to open or take the luminaire apart.
5. Wrap is available with Fagerhult’s lighting control
system, e-Sense. Choose between single or master
luminaires depending on the design and complexity
of the installation. Wrap can also be supplied with a
variety of different control options.
6. The Wrap Direct version can be mounted on T-bars
via a special adapter which is ordered as an accessory
– highlighted on the product page.
pendant/surface

523
128369
105
43
Lamell
Information LED
4000 K ≥ 80 L70 50.000 h MacAdam 4 SDCM
Installation
secured to the luminaire. The
bracket slides along the luminaire
for flexible pendant spacing.
Connection
the luminaire and are concealed by
the end-cap. 5-way snap-in terminal
block at one end of the luminaire.
Design
Body in extruded aluminium and
end-caps in cast metal. White (RAL
9016) structured finish. Opal acrylic
plastic cover on top of the luminaire.
Louvre
Lamell – lamell louvre in grey enam-
elled sheet steel.
Miscellaneous
Wrap LED has a specially developed
lamell louvre with excellent me-
chanically shielding, avoiding glare
from the diodes at certain angles.
Wrap LED has an average luminance
of 3000 cd/m², fulfilling the lighting
standard EN 12464-1.
Wrap is suspended via flexible brackets
which allows sideways movement. The
bracket is supplied with the luminaire.
Wrap
LED
Suffix code
■ -16 With one pull-cord
■ -448 e-Sense ActiLume single luminaire, 1 pull dim-cord
■ -449 DALI/Phase-pulse control, 1 pull dim-cord
Luminaire
System, W Colour temp., K Light dist. Luminous flux, lm Efficiency, lm/W kg
48 4000 30/70 3840 80 4.4 16870 ■
For current information, please refer to our website.
Accessories
3⊗1.0 mm². L=1.0 m.
Small + large ceiling cup for T-bars 25 mm, white/pair 94302
Large ceiling cups for T-bars 25 mm, white/pair 94445
5⊗1.0 mm². L=1.0 m.
Small + large ceiling cup for T-bars 25 mm, white/pair 91693
Large ceiling cups for T-bars 25 mm, white/pair 91694

523
W A
25/28/50/54 1283
32/35/45/49 1583
Tandem
W A
25/28/50/54 2452
32/35/45/49 3052
A
69
80
8
Beta DeltaLamell
Installation
For surface mounting or wire
suspension via friction locks secured
to the luminaire. The bracket slides
along the luminaire for flexible
pendant spacing.
Connection
Connections are made at the end
of the luminaire and are concealed
by the end-cap. 5-way, snap-in
terminal block in one end of the
luminaire with the possibility of
further connections.
Design
end-caps in cast metal. White
(RAL 9016) structured finish.
Louvre
Beta – double parabolic reflector
louvre with satin matt metallised al-
uminium side and cross-blades with
excellent reflection characteristics
(> 92 %), integrated into a single
unit. The louvre remains attached
when opened. Earthed.
elled sheet steel.
Delta – diffused micro-prism in
acrylic TPb (PMMA) with good opti-
cal characteristics.
Reflector
Beta – the louvre acts as a reflector.
Lamell, Delta – reflector in metal-
lised aluminium.
Miscellaneous
Wrap is equipped with a multi-
ballast.
Wrap direct is equipped with light slots
on the sides of the luminaire to create a
decorative, incidental light around the
luminaire.
Connections are made in the luminaire
end-cap.
Wrap
Direct
Luminaire
FDH Beta Lamell Delta
1⊗25/28/50/54 16811 16801 16806 ■ ●¹⁾
1⊗32/35/45/49 16813 16803 16808 ■ ●¹⁾
¹⁾e-Sense can only be supplied in the Beta version.
Luminaire tandem
2⊗1⊗25/28/50/54 16812 16802 16807 ■
2⊗1⊗32/35/45/49 16814 16804 16809 ■
Suffix code
■ -436 DALI/DSI/switchDIM
■ -409 Phase-pulse control, one pull-cord
● -384 e-Sense ActiLume single luminaire pull dim-cord
Accessories
Complete wire suspension, ceiling cups and mains cable
3⊗1.0 mm². L=1.0 m. ¹⁾
5⊗1.0 mm². L=1.0 m. ¹⁾
Bracket for direct mounting on T-bars
Bracket for T-bars 25 mm. 94050
¹⁾Requires wire lock (94329/pair) to complete set.
pendant/surface

523
A
69
105
43
W A
25/28/50/54 1283
32/35/45/49 1583
Tandem
W A
25/28/50/54 2452
32/35/45/49 3052
Beta DeltaLamell
Installation
secured to the luminaire. The
Connection
the luminaire and are concealed by
the end-cap. 5-way snap-in terminal
block at one end of the luminaire.
Design
end-caps in cast metal. White
(RAL 9016) structured finish. Trans-
parent acrylic plastic cover on top of
the luminaire.
Louvre
elled sheet steel.
Reflector
Beta – the louvre acts as a reflector.
Lamell, Delta – reflector in metal-
lised aluminium.
Miscellaneous
Wrap is equipped with a multi-
ballast.
Wrap is suspended via flexible brackets
which allows sideways movement. The
bracket is supplied with the luminaire.
Fagerhult’s lighting control system
e-Sense is discreetly integrated in the
end-cap.
Wrap
Direct/indirect
Luminaire
2⊗25/28/50/54 16831 16821 16826 ■ ●
2⊗32/35/45/49 16833 16823 16828 ■ ●
Separate lighting
2⊗25/28/50/54 16845 16841 16843 ■ ▲
2⊗32/35/45/49 16846 16842 16844 ■ ▲
Luminaire tandem
2⊗2⊗25/28/50/54 16832 16822 16827 ■
2⊗2⊗32/35/45/49 16834 16824 16829 ■
Suffix code
● -16 With one pull-cord
● -384 e-Sense ActiLume single luminaire pull dim-cord
● -409 Phase-pulse control, one pull-cord
▲ -17 With two pull-cords
▲ -410 Phase-pulse control, two pull-cords
Accessories
3⊗1.0 mm². L=1.0 m
5⊗1.0 mm². L=1.0 m.
Large ceiling cups for T-bars 25 m, white/pair 91694

Classic
By combining the latest in light sources with inno-
vative solutions, Classic is a luminaire with superior
efficiency and optimal lighting comfort.
Classic has been developed to meet the need
for working and general light in offices and
schools, where the focus is on creativity and
well-being, without compromising economic
and environmental requirements.
A double parabolic reflector louvre, a
well-balanced light pattern and a max-
imised light yield from the diodes are the
three factors that combine to produce a
very viable payback time. With a measured
effect of around 110 lm/W, it is also possible,
in certain cases, to reduce the number of
luminaires required to light a space. Variable
suspension spacing facilitates both planning
and installation.

523
1152 110
92
Information LED
3000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
4000 K ≥ 80 L70 50.000 h MacAdam 3 SDCM
Installation
Installation via wire suspension.
Luminaire bracket with friction lock
included with the luminaire. The
Connection
2.4 m mains cable 3⊗1.0 mm² and
an earthed plug. The connecting
mains cable comes out on the same
side as the pull cord. Additional
suffix codes -402 and -459 indicate
that the luminaire is delivered with
a 2.4 m mains cable 5⊗0.75 mm²
excl. plug.
Design
Body in white (RAL 9016) extrud-
ed aluminium. The upper side is
covered by a lined diffuser that
serves as a light distributor and a
dust cover.
Louvre
Beta LED – double parabolic
reflector louvre with satin matt
metallised aluminium side and
cross-blades with an integrated opal
lined diffuser that minimises the
risk of uncomfortable glare from
the diodes.
Reflector
Reflector made of enamelled
aluminium, giving wide light distri-
bution of the indirect light.
Classic LED has a flexible mount for
wire suspension, which can easily be
adjusted lengthways.
Classic
LED
Accessories
Wire suspension with white ceiling cups. L=1.5 m.
Small ceiling cups, pair 94414
Small ceiling cups for T-bars 25 mm, pair 94415
Luminaire
System, W Colour temp. K Luminous flux, lm lm/W
60 3000 6400 107 16006 ■
60 4000 6400 107 16007 ■
Suffix code
■ -16 One pull-cord
■ -448 e-Sense ActiLume single luminaire, one pull-cord
■ -449 DALI/Phase-pulse control, one pull-cord
■ -457 e-Sense Connect with sensor
■ -458 e-Sense Connect
■ -459 e-Sense ActiLume master luminaire
pendant/surface

Notor
Designed by Julle Oksanen and Vesa Honkonen
LED or T5, Notor’s expansive range spans suspended,
surface mounted and recessed variations, offering
the flexibility to maintain a consistent aesthetic
across numerous applications.
Notor is characterised by discretion. Its
minimalist style and clean line design is
constructed of aluminium with a natural
anodised finish. In continuous runs Notor
provides an unbroken line of light in the
ceiling while the L-coupler offers the scope
to create more varied installations. The LED
variation is lit all the way to the end-caps of
the luminaire housing, further enhancing
its visual appeal with illuminated corners.
The luminaires can be connected using
a snap-in connector for safe and efficient
installation, while providing additional
protection to the light sources and other
technology during installation.
Notor recessed, p. 126–137.

Notor LED
2 3 4
5 6
1
2)
1) Wall bracket with connecting part, left
2) Wall bracket
3) Wall mount
Notor LED wall bracket
1)
Notor LED system dimension
3)
1263
StartCont.Left
1168632
598
1. Notor LED utilises the benefits of LEDs. The
luminaire has an exceptional level of uniformity in
the diffuser and a high luminous efficacy. Notor LED
can be surface mounted or suspended via a wire
pendant.
2. The system is connected via the end-cap of the
start luminaire which hides the wiring. The start
luminaire can also be used in a single installation.
3. For continuous and system installations,
through-wiring is achieved via a snap-in connection:
the luminaires are clicked together and then secured
with a screw joint. Each luminaire unit has an inte-
grated ballast.
4. The continuous luminaires have an unbroken line
of light without dark fields at the transition between
the luminaire units.
5. The L-joints provide full lighting, creating an aes-
thetically pleasing transition in corners.
6. The LEDs are protected against contact by a plas-
tic cover which prevents external influences.
pendant/surface

523
A+6
A₁ A₂
W A A₁ A₂
11 684 195 385
22 1266 195 969
44 2433 195 2136
W A A₁ A₂
11 584 99 385
22 1168 99 969
44 2335 99 2136
A
A₁ A₂
99 385
632
100
89
406 595
Start Continuous
60
60
All versions
Installation
Designed for single or continuous
installation. Surface mounted or
suspended via a wire pendant and
special loops that give flexible c/c
spacing. Can also be mounted on
the wall via the wall bracket, see
accessories.
Connection
The luminaire is equipped with
an access hole for cabling on the
top. A special short end with cable
entry is used for a surface mounted
mains cable, see accessories. The
luminaire unit is equipped with a
through-wiring cable (5⊗1.5 mm²)
and a snap-in connection in each
end-cap. In a continuous instal-
lation, the luminaire row should
always begin with a start luminaire.
Design
Luminaire body in natural anodised,
extruded aluminium finish.
Louvre
(PMMA).
Accessories
Assembly fittings and supplementa-
ry components, see accessories.
Miscellaneous
Illuminated corners with wiring
option can only be suspended. The
illuminated corners can be used as
a start luminaire and are equipped
with through-wiring and quick con-
nection in one end. The corners can
only be used in closed systems.
LED provides uniform luminance and
completely illuminated corners.
With continuous installation, all
wiring needed is performed in the start
luminaire, which provides a safe and
efficient installation.
Notor LED
Information LED
3000 K ≥ 85 L70 50.000 h MacAdam 3 SDCM
4000 K ≥ 85 L70 50.000 h MacAdam 3 SDCM
Suffix code
required function.
Luminaire
Modular length Colour temp., K System, W Luminous flux, lm Efficiency, lm/W kg Start/single Continuous
Straight luminaire
600 4000 10 880 91 2.0 26310 26313 ■
600 3000 10 780 80 2.0 26316 26319 ■
1200 4000 18 1850 102 3.0 26311 26314 ■
1200 3000 18 1650 90 3.0 26317 26320 ■
2400 4000 36 3700 101 6.0 26312 26315 ■
2400 3000 36 3300 90 6.0 26318 26321 ■
Illuminated corner
Right
600⊗600 4000 18 1760 96 3.0 26332* 26330 ■
600⊗600 3000 18 1560 85 3.0 26336* 26334 ■
Left
600⊗600 4000 18 1760 96 3.0 26333* 26331 ■
600⊗600 3000 18 1560 85 3.0 26337* 26335 ■
* Only for suspension and in closed systems.

123 274
3 3
1
2
1. Wall bracket for direct- and direct/indirect lighting luminaire
Wall bracket 92468
Wall bracket with connection part (to the left) 92469
2. Wall socket
Wall socket 91962
End-cap
End-cap, with connection part/each 92470
End-cap with hole for surface mounted cable to ceiling luminaire/each 92471
Wire bracket incl. wire lock
Wire bracket incl. wire lock, alu grey (excl. wire)/pair 91960
3. Wire suspension with alu-grey wire bracket and ceiling cups. L=1.5 m.
Small ceiling cups, white/pair 91980
Small ceiling cups, grey/pair 91982
Small ceiling cups for T-bars 25 mm, white/pair 91981
Small ceiling cups for T-bars 25 mm, grey/pair 91983
4. Complete wire suspension, ceiling cups and mains cable 3⊗1.0 mm². L=1.0 m.
Small + large ceiling cup, grey/pair 94761
Large ceiling cups, grey/pair 94763
Complete wire suspension, ceiling cups and mains cable 5⊗1.0 mm². L=1.0 m.
Small + large ceiling cup, grey/pair 94767
Large ceiling cups, grey/pair 94769
Notor LED
Accessories
4 4
pendant/surface

Notor G2
2 3 4
75 6
1
W
A1
A2
A3
A4
A5
A2
A3
A4
A5
1⊗21/39 1098 1038 933 1083 978
1⊗20/24 798 738 633 783 678
1⊗25/28/50/54 1398 1338 1233 1383 1278
1⊗32/35/45/49/73/80 1698 1638 1533 1683 1578
2⊗1⊗21/39 1971 1911 1806 1956 1851
2⊗1⊗25/28/50/54 2571 2511 2406 2556 2451
2⊗1⊗32/35/45/49/73/80 3171 3111 3006 3156 3051
A1
2)
3) 5)
7)
1) Exchanger, direct/indirect
2) emLED-unit
3) L-connection
4) T-connection
5) X-connection
6) Wall bracket with connection, left
7) Wall bracket
8) Wall socket
Notor G2 system connections
Notor G2 wall holdings
1)
6)
Notor G2 system dimensions
4)
8)
1. The range is provided with connections integrated
into the luminaires. The opening on the luminaire
runs to the opposite end-cap instead of terminating
with a connection module.
2–3. The connection takes place at the end of the
start luminaire and is concealed by a cover plate on
the bottom.
4–5. Continuous mounting can provide aesthetic
and practical advantages. The continuous mounting
is made completely without any visible details, the
screw fixing gives the mechanic stability. Contin-
uous- or system mounting always start with a
connection luminaire that connects to continuous
luminaires. Continuous connecting creates an
unbroken line of light.
6–7. Notor G2 also offers possibilities to mount a
system using L-, T- or X-connections. If you want to
mix direct and indirect luminaires in the system, you
can use an exchange unit.

523
Lamell
W A
Start
1⊗21/39 993
1⊗20/24 693
1⊗25/28/50/54 1293
1⊗32/35/45/49/73/80 1593
2⊗1⊗21/39 1866
2⊗1⊗25/28/50/54 2466
2⊗1⊗32/35/45/49/73/80 3066
W A
Continuous
1⊗21 873
1⊗20/24 573
1⊗25/28/50/54 1173
1⊗32/35/45/49/73/80 1473
2⊗1⊗21 1746
2⊗1⊗25/28/50/54 2346
2⊗1⊗32/35/45/49/73/80 2946
A+6
60
60
A
60
60
Start Continuous
Opal
pendant/surface
Notor G2
Direct
Suffix code
Wire suspension permits flexible c/c
spacing along the length of the lumi-
naire unit.
Luminaire Lamell
FDH kg Start/Single Continuous
1⊗20/24 1.7 26902 26912 ■
1⊗21 2.0 26901 26911 ■
1⊗25/28 2.3 26903 26913 ■
1⊗32/35 2.6 26904 26914 ■
1⊗39 2.0 26905 26915 ■
1⊗45/49 2.6 26770 26772 ■
1⊗50/54 2.3 26906 26916 ■
1⊗73/80 2.6 26907 26917 ■
2⊗1⊗21 3.7 26921 26931 ■
2⊗1⊗25/28 4.3 26923 26933 ■
2⊗1⊗32/35 4.9 26924 26934 ■
2⊗1⊗39 3.7 26925 26935 ■
2⊗1⊗45/49 4.9 26771 26773 ■
2⊗1⊗50/54 4.3 26926 26936 ■
2⊗1⊗73/80 4.9 26927 26937 ■
Installation
Designed for single or continuous
installation using wire pendant and
special loops that give flexible c/c
spacing. Can also be wall mounted
with special brackets, see Acces-
sories.
Connection
The single luminaire is equipped
with 2.4 m connection cable
3⊗1.5 mm². The luminaire unit is
equipped with through-wiring cable
(5⊗1.5 mm²) and a snap-in terminal
block at each end. Luminaries for
dimming, suffix -436 and -368, are
delivered with 5-core. In a continu-
ous installation the luminaire row
should always begin with a start
luminaire.
Design
Luminaire body in natural anodized,
Louvre
elled sheet steel.
Opal – opal acrylic diffuser (PMMA).
Reflector
Lamell – reflector of metallised
aluminium.
Opal – reflector of white enamelled
sheet steel.
Light distribution
Symmetrical.
Emergency lighting
There is a unit with integrated
emLED available for Notor G2, see
Accessories.
Dimming
Most models can also be equipped
with other ballasts for dimming.
Accessories
Installation fittings and supplemen-
tary details, see Accessories.
Luminaire Opal
1⊗21 2.0 26998 26990 ■
1⊗25/28 2.3 26938 26939 ■
1⊗32/35 2.6 26948 26949 ■
1⊗45/49 2.6 26774 26776 ■
2⊗1⊗21 3.7 26958 26959 ■
2⊗1⊗25/28 4.3 26968 26969 ■
2⊗1⊗32/35 4.9 26978 26979 ■
2⊗1⊗45/49 4.9 26775 26777 ■
Start/single luminaire.

523
W A
Start
1⊗25/28/50/54 1293
1⊗32/35/45/49/73/80 1593
W A
Continuous
1⊗25/28/50/54 1173
1⊗32/35/45/49/73/80 1473
A+6
60
60
A
60
60
Start Continuous
All versions
20%
80%
Installation
For single or continuous installation
using wire suspension and special
loops that give flexible c/c spacing.
Can also be wall mounted with
special bracket, see Accessories.
Connection
block at each end. Luminaires for
luminaire.
Design
Louvre
elled sheet steel.
Reflector
Metallised aluminium reflector.
Light distribution
Symmetrical
Emergency lighting
Accessories.
Dimming
Accessories
Luminaire
1⊗25/28 2.3 26881 26891 ■
1⊗32/35 2.6 26882 26892 ■
1⊗45/49 2.6 26883 26893 ■
1⊗50/54 2.3 26884 26894 ■
1⊗73/80 2.6 26885 26895 ■
Notor G2 can be combined with acces-
sories. Here wall bracket 91962.
Notor G2 direct/indirect provides the
indirect light through slots on the top.
Suffix code
Notor G2
Direct/indirect

523
All versions
W A
Start
1⊗21/39 993
1⊗20/24 693
1⊗25/28/50/54 1293
1⊗32/35/45/49/73/80 1593
2⊗1⊗21/39 1866
2⊗1⊗25/28/50/54 2466
2⊗1⊗32/35/45/49/73/80 3066
W A
Continuous
1⊗21 873
1⊗20/24 573
1⊗25/28/50/54 1173
1⊗32/35/45/49/73/80 1473
2⊗1⊗21 1746
2⊗1⊗25/28/50/54 2346
2⊗1⊗32/35/45/49/73/80 2946
A+6
60
60
A
60
60
Start Continuous
pendant/surface
Notor G2
Indirect
Suffix code
The light opening is covered by an
acrylic plastic diffuser. Supplied with the
luminaire.
The wire suspension permits flexible c/c
spacing. We recommend a black wire
bracket to limit the luminance.
Luminaire
1⊗20/24 1.7 26842 26852 ■
1⊗21 2.0 26841 26851 ■
1⊗25/28 2.3 26843 26853 ■
1⊗32/35 2.6 26844 26854 ■
1⊗39 2.0 26845 26855 ■
1⊗45/49 2.0 26778 26780 ■
1⊗50/54 2.3 26846 26856 ■
1⊗73/80 2.6 26847 26857 ■
2⊗1⊗21 3.7 26861 26871 ■
2⊗1⊗25/28 4.3 26863 26873 ■
2⊗1⊗32/35 4.9 26864 26874 ■
2⊗1⊗39 3.7 26865 26875 ■
2⊗1⊗45/49 4.9 26779 26781 ■
2⊗1⊗50/54 4.3 26866 26876 ■
2⊗1⊗73/80 4.9 26867 26877
Installation
For single or continuous installation
using wire suspension and special
loops that give flexible c/c spacing.
Connection
block at each end. Luminaires for
luminaire.
Design
Reflector
Metallised aluminium reflector.
Emergency lighting
Accessories.
Dimming
Accessories

523
Lamell
W A A1
A2
Start
1⊗21/39 993 220 670
1⊗20/24 693 200 410
1⊗25/28/50/54 1293 220 970
1⊗32/35/45/49/73/80 1593 220 1270
2⊗1⊗21/39 1866 220 1543
2⊗1⊗25/28/50/54 2466 220 2143
2⊗1⊗32/35/45/49/73/80 3066 220 2743
W A A1
A2
Continuous
1⊗21 873 100 670
1⊗20/24 573 80 410
1⊗25/28/50/54 1173 100 970
1⊗32/35/45/49/73/80 1473 100 1270
2⊗1⊗21 1746 100 1543
2⊗1⊗25/28/50/54 2346 100 2143
2⊗1⊗32/35/45/49/73/80 2946 100 2743
A+6
60
A2
60
A1
A
60
A2
60
A1
Start Continuous
Opal
Notor G2
Ceiling
Suffix code
Unbroken light opening in continuous
installation.
The ceiling luminaire is equipped with
keyhole slots for easy installation.
Luminaire Lamell
1⊗20/24 1.7 26942 26952 ■
1⊗21 2.0 26941 26951 ■
1⊗25/28 2.3 26943 26953 ■
1⊗32/35 2.6 26944 26954 ■
1⊗39 2.0 26945 26955 ■
1⊗45/49 2.6 26782 26784 ■
1⊗50/54 2.3 26946 26956 ■
1⊗73/80 2.6 26947 26957 ■
2⊗1⊗21 3.7 26961 26971 ■
2⊗1⊗25/28 4.3 26963 26973 ■
2⊗1⊗32/35 4.9 26964 26974 ■
2⊗1⊗39 3.7 26965 26975 ■
2⊗1⊗45/49 4.9 26783 26785 ■
2⊗1⊗50/54 4.3 26966 26976 ■
2⊗1⊗73/80 4.9 26967 26977
Installation
Surface mounted.
Connection
Cable entries fitted with blanking
grommets on top. A special short
end with cable entry is used for a
surface mounted mains cable, see
accessories. The luminaire unit is
(5⊗1,5 mm²) and a snap-in terminal
block at each end. In a continuous
installation the luminaire row
luminaire.
Design
Louvre
elled sheet steel.
Opal – opal acrylic diffuser (PMMA).
Reflector
Lamell – reflector of metallised
aluminium.
Opal – reflector of white enamelled
sheet steel.
Emergency lighting
Accessories.
Dimming
Accessories
Luminaire Opal
1⊗21 2.0 26898 26899 ■
1⊗25/28 2.3 26838 26839 ■
1⊗32/35 2.6 26848 26849 ■
1⊗45/49 2.6 26786 26788 ■
2⊗1⊗21 3.7 26858 26859 ■
2⊗1⊗25/28 4.3 26868 26869 ■
2⊗1⊗32/35 4.9 26878 26879 ■
2⊗1⊗45/49 4.9 26787 26789 ■

135
105
105
135
210
135105
105
210
210
105
105
123 274
1
2
3
4
7
65
1. L-coupler for direct- and direct/indirect lighting luminaire, incl. wire lock
L-coupler left, direct 92453
L-coupler right, direct 92454
L-coupler for luminaire surface mounted
L-coupler left, surface mounted 92448
L-coupler right, surface mounted 92449
L-coupler for indirect lighting luminaire, incl. wire lock
L-coupler left, indirect 92455
L-coupler right, indirect 92456
2. T-coupler for direct- and direct/indirect lighting luminaire, incl. wire lock
T-coupler connecting left, direct 92457
T-coupler connecting right, direct 92458
T-coupler connecting centre, direct 92459
T-coupler for indirect lighting luminaire, incl. wire lock
T-coupler connecting left, indirect 92460
T-coupler connecting right, indirect 92461
T-coupler connecting centre, indirect 92462
3. X-coupler for direct- and direct/indirect lighting luminaire, incl. wire lock
X-coupler 92451
X-coupler for indirect lighting luminaire, incl. wire lock.
X-coupler 92452
4. Wall bracket for direct and direct/indirect lighting luminaire. Used in combination
with continuous luminaires. End-caps included.
Wall bracket with connection part (to the left) 92467
Wall bracket 92468
5. Wall socket
Wall socket 91962
6. Alternating unit
Changes between direct and indirect luminaire, L=120 mm 92450
7. emLED-unit, only in combination with HF-standard
emLED-unit for direct lighting luminaire, L=210 mm 92466
emLED-unit for indirect lighting luminaire, L=210 mm 92463
End-cap
End-cap/each 92464
End-cap with hole for surface mounted cable to ceiling luminaire/each 92465
Wire suspension bracket incl. wire lock (excl. wire)
Anodised/pair 91960
Black/pair 91961
Wire suspension with alu wire bracket L=1.5 m with plastic ceiling cups ∅ 57 mm
Wire suspension for indirect lighting luminaire with black wire bracket and ceiling
cup. L=1.5 m. L=1.5 m.
Notor G2
Accessories
pendant/surface

Avion
Avion has a delicate beauty masking a robust design.
An elegant flow of light which creates an impres-
sion of weightlessness, designed to act as a striking
solitary luminaire, or to form a system where its long
dimensions create a fascinating linear interaction.
Avion is an extensive range of pendant
luminaires. Behind the clean lines hides an
innovative design and advanced lighting
technology. The assortment comprises of
four different combinations of direct and
indirect light distributions. Efficiency and
visual comfort are ensured via Fagerhults
Lamell and Beta r5 louvres.
The light source for the indirect distribu-
tion are discreetly positioned in a subtle
elevation at the top of the luminaire, while
the thin lines and the concaved edges pro-
vide the essence of the design. The distinc-
tive colour contrasts along the side attracts
attention and enhances its form.
Avion can be continuously installed,
seamlessly integrated via continuous con-
nectors. The addition of flexible connectors
offers the potential to create curved lines,
with variations at each connection point.
Avion achieved an honourable mention
in the 2009 red dot design awards.

Avion
2
1
3
5
2
3
6
3
4
7
8
Avion 100 Avion 80 Avion 50 Avion 20
pendant/surface
1. The body of the luminaire is finished in two
contrasting colours – adding to the visual appeal. All
parts are manufactured in aluminium, giving Avion
a robust construction behind its delicate appear-
ance.
2. Avion is available with two different louvres –
Lamell and Beta r5.
3. Avion is designed for both single and continuous
installation. The range includes two accessories for
continuous mounting, a straight connector or Avion
Flex for a varied system design. The protractor on
the flexible coupling makes adjustment of system
assemblies easy.
4. With Fagerhult’s system for light control, e-Sense,
the sensor is integrated discreetly at the luminaire’s
end-cap – offering an aesthetic and flexible solution.
5. All Avion models with an indirect light distribu-
tion are equipped with a dust cover for the light
opening on top – helping to keep the luminaire and
louvre clean.
6. Avion has a special lamp holder which significantly
simplifies re-lamping.
7. Avion can be supplied fully assembled with a
protective plastic cover, simplifying installation and
protecting the luminaire against dirt during the
construction process.
8. With its large selection of light distributions, Avion
is a luminaire range that satisfies most needs in a
lighting project. Each luminaire is named after its
proportion of direct light, making it easy to identify
which one to select.

523
52
D²
D⁴
D¹
D⁶
D⁵
D³
206
W D¹ D² D³ D⁴ D⁵ D⁶
25/28 1200 1275 1350 1330 1460 1335
32/35 1500 1575 1650 1630 1760 1635
45/49 1500 1575 1650 1630 1760 1635
50/54 1200 1275 1350 1330 1460 1335
1⊗32/35 W, Beta 2⊗32/35 W, Beta 1⊗32/35 W, Lamell 2⊗32/35 W, Lamell
Installation
Wire suspension via wire lock
secured directly to the luminaire.
Balanced.
Connection
Single installation – the luminaire
is equipped with a 2.4 m mains
cable 3⊗0.75 mm² and an earthed
plug as standard. Luminaires
ordered with switchDIM or DALI are
equipped with 2.4 m mains cable
5⊗0.75 mm² excl. plug.
Continuous installation – 5-way
snap-in terminal block at each end
and 3⊗1.5 mm² through-wiring
as standard. With dimming, 5-way
snap-in terminal block,1-phase
through-wiring possible.
Design
end-caps in cast aluminium. The lu-
minaire is finished in a white/black
(RAL 9016 structured/RAL 9005)
or alu-grey/white (RAL 9006
structured/ RAL 9016) design. The
top cover is transparent acrylic
plastic. Luminaires for continuous
installation require end-caps – must
be ordered separately.
Louvre
elled sheet steel.
Reflector
Reflector material of metallised alu-
minium with satin matt surface.
Accessories
Assembly fittings and supplementary
components, see Accessories.
Luminaire, single installation incl. end-caps
FDH kg White/Black Grey/White
Beta
1⊗25/28 6.6 29021 29051 ■
1⊗32/35 8.1 29022 29052 ■
1⊗45/49 8.1 29023 29053 ■
1⊗50/54 6.6 29024 29054 ■
2⊗25/28 6.6 29026 29056 ■ ●
2⊗32/35 8.1 29027 29057 ■ ●
2⊗45/49 8.1 29028 29058 ■
2⊗50/54 6.6 29029 29059 ■
Lamell
1⊗25/28 6.6 29001 29031 ■
1⊗32/35 8.1 29002 29032 ■
1⊗45/49 8.1 29003 29033 ■
1⊗50/54 6.6 29004 29034 ■
2⊗25/28 6.6 29006 29036 ■ ●
2⊗32/35 8.1 29007 29037 ■ ●
2⊗45/49 8.1 29008 29038 ■
2⊗50/54 6.6 29009 29039 ■
Luminaire, continuous installation excl. end-caps
Beta
1⊗25/28 6.5 29332 29341 ■
2⊗25/28 6.5 29337 29346 ■
1⊗32/35 8.0 29333 29342 ■
2⊗32/35 8.0 29338 29347 ■
1⊗45/49 8.0 29334 29343 ■
2⊗45/49 8.0 29339 29348 ■
1⊗50/54 6.5 29335 29344 ■
2⊗50/54 6.5 29340 29349 ■
Avion 100 is for direct lighting only.
The aluminium cover adds to the solid
appearance of the luminaire.
The Beta louvre provides excellent effi-
ciency and a controlled luminance.
Suffix code
● -218 e-Sense smartSWITCH absence detector
● -219 e-Sense smartSWITCH on/off
● -220 e-Sense smartSWITCH pull dim-cord
● -384 e-Sense ActiLume single luminaire, pull dim-cord
Avion 100
Beta, Lamell

523
pendant/surface
52
D²
D⁴
D¹
D⁶
D⁵
D³
206
W D¹ D² D³ D⁴ D⁵ D⁶
25/28 1200 1275 1350 1330 1460 1335
32/35 1500 1575 1650 1630 1760 1635
45/49 1500 1575 1650 1630 1760 1635
50/54 1200 1275 1350 1330 1460 1335
1⊗32/35 W, Beta 2⊗32/35 W, Beta 1⊗32/35 W, Lamell 2⊗32/35 W, Lamell
Installation
Balanced.
Connection
snap-in terminal block at each end
and 3⊗1.5 mm² through-wiring
as standard. With dimming, 5-way
snap-in terminal block, 1-phase
through-wiring possible.
Design
Louvre
louvre with side and cross-blades of
satin matt, metallised aluminium
with very good reflection charac-
teristics (> 92 %), integrated into
a single unit. The louvre remains
attached when opened. Earthed.
elled sheet steel.
Reflector
Accessories
Beta
1⊗25/28 6.5 29081 29111 ■
1⊗32/35 8.0 29082 29112 ■
1⊗45/49 8.0 29083 29113 ■
1⊗50/54 6.5 29084 29114 ■
2⊗25/28 6.5 29086 29116 ■ ● ●
2⊗32/35 8.0 29087 29117 ■ ● ●
2⊗45/49 8.0 29088 29118 ■
2⊗50/54 6.5 29089 29119 ■
Lamell
1⊗25/28 6.5 29061 29091 ■
1⊗32/35 8.0 29062 29092 ■
1⊗45/49 8.0 29063 29093 ■
1⊗50/54 6.5 29064 29094 ■
2⊗25/28 6.5 29066 29096 ■ ●
2⊗32/35 8.0 29067 29097 ■ ●
2⊗45/49 8.0 29068 29098 ■
2⊗50/54 6.5 29069 29099 ■
Beta
1⊗25/28 6.4 29300 29311 ■
1⊗32/35 7.9 29301 29312 ■
1⊗45/49 7.9 29302 29313 ■
1⊗50/54 6.4 29303 29314 ■
2⊗25/28 6.4 29305 29316 ■
2⊗32/35 7.9 29306 29317 ■
2⊗45/49 7.9 29307 29318 ■
2⊗50/54 6.4 29308 29319 ■
Avion Flex – an aesthetic way to create
system luminaires with angles.
Avion with e‑Sense – the sensor is dis‑
cretely integrated into the end-cap.
Suffix code
Avion 80
Beta, Lamell

523
52
D²
D⁴
D¹
D⁶
D⁵
D³
206
W D¹ D² D³ D⁴ D⁵ D⁶
25/28 1200 1275 1350 1330 1460 1335
32/35 1500 1575 1650 1630 1760 1635
45/49 1500 1575 1650 1630 1760 1635
50/54 1200 1275 1350 1330 1460 1335
2⊗32/35 W, Beta 2⊗32/35 W, Lamell
Installation
Balanced.
Connection
snap-in terminal block at each
end and through-wiring cable
3⊗1.5 mm² as standard. With dim-
ming, 5-way snap-in terminal block,
Design
Louvre
louvre with side and cross-blades of
satin matt, metallised aluminium
with very good reflection charac-
attached when opened. Earthed.
elled sheet steel.
Reflector
Accessories
Beta
1⊗25/28 6.5 29141 29171 ■
1⊗32/35 8.0 29142 29172 ■
1⊗45/49 8.0 29143 29173 ■
1⊗50/54 6.5 29144 29174 ■
2⊗25/28 6.5 29146 29176 ■ ● ●
2⊗32/35 8.0 29147 29177 ■ ● ●
2⊗45/49 8.0 29148 29178 ■
2⊗50/54 6.5 29149 29179 ■
Lamell
1⊗25/28 6.5 29121 29151 ■
1⊗32/35 8.0 29122 29152 ■
1⊗45/49 8.0 29123 29153 ■
1⊗50/54 6.5 29124 29154 ■
2⊗25/28 6.5 29126 29156 ■ ●
2⊗32/35 8.0 29127 29157 ■ ●
2⊗45/49 8.0 29128 29158 ■
2⊗50/54 6.5 29129 29159 ■
Beta
1⊗25/28 6.4 29241 29251 ■
1⊗32/35 8.0 29242 29252 ■
1⊗45/49 8.0 29243 29253 ■
1⊗50/54 6.4 29244 29254 ■
2⊗25/28 6.4 29246 29256 ■
2⊗32/35 8.0 29247 29257 ■
2⊗45/49 8.0 29248 29258 ■
2⊗50/54 6.4 29249 29259 ■
The removable end-caps partially con-
ceal the friction lock from view.
Suffix code
Avion 50
Beta, Lamell
A continuous coupler is available as an
accessory.

523
pendant/surface
52
D¹
D⁶
206
W D¹ D² D³ D⁴ D⁵ D⁶
25/28 1200 1275 1350 1330 1460 1335
32/35 1500 1575 1650 1630 1760 1635
45/49 1500 1575 1650 1630 1760 1635
3⊗45/49 W, Beta 3⊗45/49 W, Lamell
Installation
Balanced.
Connection
2.4 m mains cable 3⊗0.75 mm² and
an earthed plug as standard. Lumi-
naires ordered with switchDIM or
DALI are equipped with 2.4 m mains
cable 5⊗0.75 mm² excl. plug.
Design
or alu-grey/white (RAL 9006 struc-
tured/RAL 9016) design. The top
cover is transparent acrylic plastic.
Louvre
elled sheet steel.
Reflector
Accessories
Beta
3⊗25/28 6.6 29191- 29211- ■
3⊗32/35 8.1 29192- 29212- ■
3⊗45/49 8.1 29193- 29213- ■
Lamell
3⊗25/28 6.6 29181- 29201- ■
3⊗32/35 8.1 29182- 29202- ■
3⊗45/49 8.1 29183- 29203- ■
Luminaire must be completed with desired function. See table
with suffix codes.
Avion 20 can be equipped with two
pull-cords that control the direct and
indirect light respectively.
Suffix code
■ -17 With two pull-cords, separate direct/indirect
■ -218 e-Sense smartSWITCH absence detector
■ -219 e-Sense smartSWITCH on/off
■ -220 e-Sense smartSWITCH pull dim-cord
■ -384 e-Sense ActiLume single luminaire, pull dim-cord
■ -410 Phase-pulse control, two pull-cords,
separate direct/indirect
Avion 20
Beta, Lamell

1
5 6
3
7 8
4 4
2
Single installation
1. Complete wire suspension, white ceiling cup. L=1.0 m
Excluding the mains cable (included with luminaire).
Small ceiling cup/pair (94327+ 94327) 94414
Small ceiling cup for T-bar 25 mm/pair (94880 + 94880) 94415
2. Discreet ceiling bracket with wire suspension and cable bushing
Wire suspension L=1.5 m, ceiling bracket chrome/pair 91696
3. Support rails for visible T-bars
L=600 mm, T-bar: 25/15, max load: 75 N/pair 90017
Wire suspension to support rails 90017 91426
4. Accessories e-Sense Connect
Control unit 86300
Remote control (for grouping) 86301
Connection cable between control unit and controller 86303
Continuous installation
1. Wire suspension with single wire and white ceiling cup. L=1,0 m
Small ceiling cup/each 94327
Large ceiling cup/each 94296
Small ceiling cup/each for T-bar 25 mm 94880
Large ceiling cup/each for T-bar 25 mm 94881
5. Wire suspension with single wire, white ceiling cup and the mains cable 3⊗1.0 mm².
L=1.0 m.
Wire suspension with single wire, white ceiling cup and the mains cable 5⊗1.0 mm².
L=1.0 m
6. Continuous coupler – straight
Continuous lighting installation is supplemented with end-caps and wire suspension.
Continuous coupler incl. friction locks, white/black/each 94992
Continuous coupler incl. friction locks, grey/white/each 94993
7. Continuous coupler – flexible
Continuous lighting installation is supplemented with end-caps and wire suspension.
Continuous coupler incl. friction locks/each 94994
8. End-cap
End-cap, white/black/pair 94990
End-cap, grey/white/pair 94991
Transparent diffuser
Transparent diffuser in acrylic, spare part – included in the luminaire.
Transparent diffuser 25/28/50/54 W 94995
Transparent diffuser 32/35/45/49 W 94996
Avion
Accessories

Open Box
Open Box is a classic combination of direct and indi-
rect light with a twist. Instead of enclosing the light
sources in a conventional luminaire housing, the
space between them is accentuated. The lower long
side of the luminaire has been perforated so that the
light forces its way through as small elements and
illuminates the whole of the inner space.
Available in two lengths Open Box can be
equipped with different types of louvre. The
active Beta louvre is ideal for large, open
plan areas where the risk of glare is greater.
The unobtrusive Lamell louvre works well
in smaller rooms and above individual
workplaces.
Open Box can be equipped with Fagerhult’s
intelligent light control system e-Sense.The
luminaires are supplied with their own sensor
permitting each luminaire to think for itself,
or act as one system.

523
Lamell
50%
50%
W A B C D
28/54 1246 120 132 1200
35/49/80 1546 120 132 1500
Beta
50%
50%
Pull-cords are placed at the same end as
the mains cable. For aesthetical reasons
both use the same hole.
Installation
Balanced.
Connection
The luminaire is equipped with
2.4 m fabric covered connection
cable (3⊗1 mm²) and for dimming
with external control 5⊗1 mm².
Design
Body of aluminium and sheet steel.
The luminaire’s outside is enamelled
in alu-grey (RAL 9006) structured or
black matt (RAL 9005) and inside in
white (RAL 9016).
Louvre
louvre with satin matt side and
cross blades, metallised aluminium
with excellent reflection charac-
teristics (> 92 %), integrated into a
single unit.
elled sheet steel.
Reflector
Metallised aluminium reflector;
providing a wide distribution of
indirect light.
Dimming
Some models are available with
other ballasts for dimming, and
equipped with Fagerhult’s light
control system – e-Sense.
Miscellaneous
The luminaire is supplied with wire
suspension. HF-std luminaires are
supplied with a multi-ballast which
permits the use of lamps with
different outputs, but of the same
length, within the same fitting.
Luminaire e-Sense
FDH kg Alu-grey Black
Beta
1⊗28+1⊗28 5.5 19940- 19930- ●
1⊗35+1⊗35 6.7 19942- 19932- ●
1⊗49+1⊗49 6.7 19943- 19933- ●
1⊗54+1⊗54 5.5 19941- 19931- ●
1⊗80+1⊗80 6.7 19944- 19934- ●
with suffix codes.
The perforated holes along the inside
of the luminaire produce an aesthetic
light spill.
Open Box
Beta, Lamell
Suffix code
■ -17 With two pull-cords, separate direct/indirect
■ -410 Phase-pulse control, two pull-cords,
separate direct/indirect
● -315 e-Sense smartSWITCH via a pull-cord
Luminaire HF-std
FDH kg Alu-grey Black
Beta
1⊗28/54+1⊗28/54 5.5 19941- 19931- ■
1⊗35/49/80+1⊗35/49/80 6.7 19944- 19934- ■
Lamell
1⊗28/54+1⊗28/54 5.5 19961- 19951- ■
1⊗35/49/80+1⊗35/49/80 6.7 19964- 19954- ■
with suffix codes.
pendant/surface

Closs
Designed by Epsilon
Closs is a series of compact, decorative luminaires,
boasting exceptional efficiency. Their slender meas-
urements and square angles reflect a neat minimal-
ist style, making Closs the given choice in rooms
where you aim for simplicity in design.
The thinking behind the design of Closs
was to combine the T5-light source with
specifically developed components in a
luminaire that satisfies the most stringent
demands on form and function.
Closs, with an r5-mini louvre, has a
clean, simple design with a cross-section
of 55⊗125 mm for both single and twin
lamp luminaires. Closs 2-cell luminaire has
a slightly larger version of the same louvre
which is available in designs with several
cells for increased efficiency.
The luminaire is available in a white or
alu grey structured enamelled finish with
three different louvres, single parabolic
Terazza, double parabolic Beta and micro-
prismatic Delta, and a direct or indirect/
direct light distribution.

Closs
2 3
4
1
5
1. Closs is available with a Beta , Delta or Terazza lou-
vre, Closs 2-cell luminaire available with Beta louvre.
Closs has the same louvre cell in both the one and
two lamp variations. Closs 2-cell luminaire offers
models with one lamp in each louvre cell.
2. The louvre snaps into the luminaire using clips.
When re-lamping, the louvre remains attached to
the luminaire with the help of the earth cable.
3. Closs has different suspension options with colour
coordinated ceiling cups and mains cables.
4. Closs can be continuously installed via couplers
which are designed in the same finish as the lumi-
naire.
5. Closs with e-Sense-solutions have the sensor
installed in the louvre’s first cell.
pendant/surface

523
A
B
C
D1
D2
D3
W A B C D1
D2
D3
1-cell
25/28 1217 125 55 1200 1208 1217
32/35 1517 125 55 1500 1508 1517
50/54 1217 125 55 1200 1208 1217
45/49 1517 125 55 1500 1508 1517
73/80 1517 125 55 1500 1508 1517
2-cell
2⊗13/14 614 258 67 600 607 614
2⊗25/28/50/54 1214 258 67 1200 1207 1214
2⊗32/35/45/49 1514 258 67 1500 1507 1514
1-lamp, 1-cell 2-lamp, 1-cell
Installation
Surface mounted or suspended via
a wire pendant. Wire installation
uses friction locks on the luminaire.
Luminaires with wire suspension
need a counterbalance of a 1-cell
luminaire (for wire suspension and
counterbalance, see Accessories).
2-cell luminaire, supplied ready-bal-
anced.
Connection
Three ∅ 19 mm cable entries fitted
with blanking grommets on the
top of the luminaire, see dimen-
sion chart. Knock-outs at each end
for surface mounted mains cable.
3-way snap-in terminal block in the
centre of the luminaire. Luminaires
for dimming, 5-way snap-in termi-
nal block, 1-phase through-wiring
possible.
Design
Luminaire body in sheet steel and
end-caps of die-cast aluminium in a
white (RAL 9016) structured or alu-
grey (RAL 9006) structured finish.
Louvre
uminium side and cross blades, with
when lowered. Earthed.
Reflector
The louvre acts as a reflector. The
luminaire is also fitted with a top
reflector.
Emergency lighting
Some variants are available with
emLED. emLED is placed in the first
louvre cell. A 300 mm blank module is
required for conventional emergency
for housing the battery and invertor.
Dimming
Most models can on request be
equipped with other ballasts for
dimming.
Luminaire
FDH kg White Alu-grey
1-cell luminaire
1⊗25/28 3.3 26605 26625 ■ ●
1⊗32/35 4.0 26607 26627 ■ ●
1⊗45/49 4.0 26615 26635 ■
1⊗50/54 3.3 26613 26633 ■ ●
1⊗73/80 4.0 26617 26637 ■ ●
2⊗25/28 3.4 26606 ■ ● ●
2⊗25/28 3.4 26626 ■ ●
2⊗32/35 4.1 26608 ■ ● ●
2⊗32/35 4.1 26628 ■ ●
2⊗45/49 4.1 26616 26636 ■
2⊗50/54 3.4 26614 26634 ■
2-cell luminaire
2⊗13/14 3.1 29501 ■
2⊗25/28 4.2 29503 ■ ●
2⊗32/35 5.9 29505 ■ ●
2⊗45/49 5.9 29507 ■
2⊗50/54 4.6 29509 ■
1-cell luminaire asymmetrical
1⊗25/28 3.3 26580 26584 ■
1⊗32/35 4.0 26581 26585 ■
1⊗45/49 4.0 26582 26586 ■
1⊗50/54 3.3 26583 26587 ■
The louvre is earthed and is fitted in the
length of the luminaire. This function
simplifies installation and cleaning.
Suffix code
Closs Beta
Direct
2⊗32/35 W, 2-cell 1⊗25/28 W, 1-cell
asymmetrical
Closs with e-Sense; the sensor unit is
placed in the luminaire body.

523
A
B
C
D1
D2
D3
W A B C D1
D2
D3
1-cell
25/28 1217 125 55 1200 1208 1217
32/35 1517 125 55 1500 1508 1517
50/54 1217 125 55 1200 1208 1217
45/49 1517 125 55 1500 1508 1517
73/80 1517 125 55 1500 1508 1517
2-cell
2⊗25/28/50/54 1214 258 67 1200 1207 1214
2⊗32/35/45/49 1514 258 67 1500 1507 1514
1-lamp. 1-cell 2-lamp, 1-cell
The luminaire can be completed with
an opal diffuser.
Installation
secured directly on the luminaire.
Balanced.
Connection
Two ∅ 19 mm cable entries fitted
top of the luminaire, see dimension
chart. 3-way snap-in terminal block
at each end. Luminaires for dim-
Design
Louvre
louvre with side and cross blades of
satin matt metallised aluminium
with excellent reflection charac-
attached when lowered. Earthed.
Reflector
The louvre acts as a reflector.
Emergency lighting
emLED. emLED is placed in the
first louvre cell. A 300 mm blank
module is required for conventional
emergency for housing the battery
and invertor.
Dimming
Luminaire
1-cell luminaire
1⊗25/28 3.2 26645 26665 ■ ●
1⊗32/35 3.9 26647 26667 ■ ●
1⊗45/49 3.9 26655 26675 ■
1⊗50/54 3.2 26653 26673 ■ ●
1⊗73/80 3.9 26657 26677 ■ ●
2⊗25/28 3.3 26646 ■ ● ●
2⊗25/28 3.3 26666 ■ ●
2⊗32/35 4.0 26648 ■ ● ●
2⊗32/35 4.0 26668 ■ ●
2⊗45/49 4.0 26656 26676 ■
2⊗50/54 3.3 26654 26674 ■
2⊗73/80 4.0 26658 26678
2-cell luminaire
2⊗25/28 4.1 29519 ■ ●
2⊗32/35 4.5 29521 ■ ●
2⊗45/49 4.5 29523 ■
2⊗50/54 4.1 29525 ■
Closs can be continuously mounted
via a coupler. Please note that the
luminaire is delivered without through-
wiring.
Suffix code
Closs Beta
Direct/indirect
2⊗45/49 W, 2-cell
pendant/surface

523
A
B
C
D1
D2
D3
W A B C D1
D2
D3
25/28 1217 125 55 1200 1208 1217
32/35 1517 125 55 1500 1508 1517
50/54 1217 125 55 1200 1208 1217
45/49 1517 125 55 1500 1508 1517
Installation
a wire pendant. Wire suspension
via wire lock secured directly on
the luminaire. Luminaires for wire
suspension need a counterbalance
(wire suspension and counter-bal-
ance, ordered separately).
Connection
possible.
Design
Luminaires for wire suspension
need a counterbalance.
Louvre
Luminaire
1-cell luminaire
1⊗25/28 3.3 26060 26068 ■
1⊗32/35 4.0 26061 26069 ■
1⊗45/49 4.0 26062 26070 ■
1⊗50/54 3.3 26063 26071 ■
2⊗25/28 3.4 26064 26072 ■
2⊗32/35 4.1 26065 26073 ■
2⊗45/49 4.1 26066 26074 ■
2⊗50/54 3.4 26067 26075 ■
Suffix code
Closs Delta
Direct

523
A
B
C
D1
D2
D3
W A B C D1
D2
D3
25/28 1217 125 55 1200 1208 1217
32/35 1517 125 55 1500 1508 1517
50/54 1217 125 55 1200 1208 1217
45/49 1517 125 55 1500 1508 1517
2-lamp
Installation
Balanced.
Connection
Design
white structured (RAL 9016) or alu-
grey structured (RAL 9006) finish.
Louvre
Luminaire
1-cell luminaire
1⊗25/28 3,2 26078 26086 ■
1⊗32/35 3,9 26079 26087 ■
1⊗45/49 3,9 26080 26088 ■
1⊗50/54 3,2 26081 26089 ■
2⊗25/28 3,3 26082 26090 ■
2⊗32/35 4,0 26083 26091 ■
2⊗45/49 4,0 26084 26092 ■
2⊗50/54 3,3 26085 26093 ■
Suffix code
Closs Delta
Direct/indirect
pendant/surface

523
AB
C
D1
D2
D3
W A B C D1
D2
D3
25/28 1217 125 55 1130/1200 1208 1217
32/35 1517 125 55 1430/1500 1508 1517
50/54 1217 125 55 1130/1200 1208 1217
45/49 1517 125 55 1430/1500 1508 1517
73/80 1517 125 55 1430/1500 1508 1517
1-lamp 2-lamp
Installation
a wire pendant. Wire suspension
via wire lock secured directly on
the luminaire. Luminaires for wire
suspension need a counterbalance
(wire suspension and counter-bal-
ance, ordered separately).
Connection
possible.
Design
end-caps of die-cast aluminium in
a white (RAL 9016) structured or
alu-grey (RAL 9006) finish. Lumi-
naires for wire suspension need a
counterbalance.
Louvre
Terazza – satin matt, metallised
aluminium reflectors with excellent
reflection characteristics (> 92 %)
and aluminium enamelled cross
blades integrated into a single unit.
The louvre remains attached when
lowered. Earthed.
Reflector
The louvre acts as a reflector. The
luminaire is also fitted with a top
reflector.
Emergency lighting
emLED. emLED is placed in the
first louvre cell. A 300 mm blank
module is required for conventional
emergency for housing the battery
and invertor.
Dimming
Luminaire
1⊗25/28 3.4 26685 26705 ■
1⊗32/35 4.1 26687 26707 ■
1⊗45/49 4.1 26695 26715 ■
1⊗50/54 3.4 26693 26713 ■
1⊗73/80 4.1 26697 26717 ■
2⊗25/28 3.5 26686 26706 ■
2⊗32/35 4.2 26688 26708 ■
2⊗45/49 4.2 26696 26716 ■
2⊗50/54 3.5 26694 26714 ■
Knock-outs at each end allow connec-
tion using surface mounted cables.
Please note that the cable entry is not
central due to lack of space.
Suffix code
Closs Terazza
Direct

523
AB
C
D1
W A B C D1
D2
D3
25/28 1217 125 55 1200 1208 1217
32/35 1517 125 55 1500 1508 1517
50/54 1217 125 55 1200 1208 1217
45/49 1517 125 55 1500 1508 1517
73/80 1517 125 55 1500 1508 1517
D2
D3
1-lamp 2-lamp
Installation
Balanced.
Connection
Design
Louvre
and aluminium enamelled cross-
lowered. Earthed.
Reflector
The louvre acts as a reflector.
Emergency lighting
emLED. emLED in the first louvre cell
is required for conventional emer-
gency. A 300 mm blank module is
required for housing the battery and
invertor.
Dimming
Luminaire
1⊗25/28 3.4 26725 26745 ■
1⊗32/35 4.1 26727 26747 ■
1⊗45/49 4.1 26735 26755 ■
1⊗50/54 3.4 26733 26753 ■
1⊗73/80 4.1 26737 26757 ■
2⊗25/28 3.5 26726 26746 ■
2⊗32/35 4.2 26728 26748 ■
2⊗45/49 4.2 26736 26756 ■
2⊗50/54 3.5 26734 26754 ■
2⊗73/80 4.2 26738 26758
The luminaire can be completed with
an opal diffuser.
Specially designed uplight slots give a
large and balanced ceiling luminance.
Suffix code
Closs Terazza
Direct/indirect
pendant/surface

11
43
Closs
Accessories
1-cell luminaire, single installation
1. Wire suspension set with ceiling cups, single wire and pendant cable 3x1.0 mm².
L=2.0 m.
For direct luminaire.
Wire suspension set with single wire, ceiling cups and pendant cable 3⊗1.0 mm².
L=1.0 m.
For direct/ indirect luminaire.
L=2.0 m.
Balance weight
Balance weight for luminaire 91972
2. Accessories e-Sense Connect
Control unit 86300
Remote control 86301
Connection cable between control unit and controller 86303
1-cell luminaire, continuous installation
1. Wire suspension with single wire and ceiling cups. L= 1.5 m.
2. Wire suspension set with ceiling cups, single wire and pendant cable 3⊗1.0 mm².
L=2.0 m.
For direct luminaire.
L=1.0 m.
L=2.0 m.
3. Continuous coupler
Continuous coupler including friction locks – white/each 91969
Continuous coupler including friction locks – grey/each 91970
4. Opal diffuser
Opal diffuser, 1⊗25/28/50/54 W 94191
Opal diffuser, 1⊗32/35/45/49 W 94193
Balance weight
Balance weight for luminaire 91972
2 2

2
3
1
4
Closs
Accessories
2-cell luminaire, single installation
1. Complete wire suspension¹⁾, ceiling cups and pendant cable 3⊗1.0 mm². L=1.0 m.
Small + large ceiling cup, white/pair (94327+94588) 94301
Small + large ceiling cup for T-bars 25 mm, white/pair (94880+94589) 94302
Complete wire suspension¹⁾, ceiling cups and pendant cable 5⊗1.0 mm². L=1.0 m.
Small + large ceiling cup, white/pair (94327+91701) 91691
Small + large ceiling cup for T-bars 25 mm, white/pair (94880+91703) 91693
¹⁾Direct luminaire must be supplemented with friction locks 94437/pair.
2-cell luminaire, continuous installation
2. Wire suspension¹⁾ with single wire and ceiling cup. L=1.0 m.
Small ceiling cup, white/each 94327
Small ceiling cup for T-bars 25 mm, white/each 94880
Wire suspension¹⁾ with single wire, ceiling cup and pendant cable 3⊗1.0 mm². L=1.0 m.
Large ceiling cup, white/each 94588
Large ceiling cup for T-bars 25 mm, white/each 94589
Wire suspension¹⁾ with single wire, ceiling cup and pendant cable 5⊗1.0 mm². L=1.0 m.
Large ceiling cup, white/each 91701
Large ceiling cup for T-bars 25 mm, white/each 91703
3. Opal diffuser
Opal diffuser, 1⊗25/28/50/54 W 94192
Opal diffuser, 1⊗32/35/45/49 W 94194
4. Continuous coupler
Continuous coupler including friction locks – white/each 91969
¹⁾Direct luminaire must be supplemented with friction locks 94437/pair.
pendant/surface

DTI
Designed by Yellon
With its three combinations of direct and indirect
light distributions, DTI is well suited to a range of
office and public environments. From installation
to on-going ergonomics and energy efficiency, DTI
delivers value throughout a projects lifecycle.
Available in either surface mounted or pen-
dant variants this luminaire’s subtle design
is shaped by the rounded sides. The distinc-
tive end caps visibly reduce the size of the
fitting, adding aesthetics to its flexibility.
DTI can be equipped with Fagerhult’s
light control solution e-Sense and emer-
gency lighting system emLED. An example
of industrial design at its best – functional
and aesthetic.

DTI
2 3 4
8
1
2 35 6 7
8 9
DTI type 1 DTI type 2 DTI type 3
80 %
20 %
50 %
50 %100 %
10
1. The DTI series has been developed to solve most
lighting requirements in commercial and academic
environments. Its clean, discreet design, straightfor-
ward assembly, excellent lighting comfort and high
degree of efficiency ensures DTI is a comprehensive
and economic solution.
2–3. DTI is available with Beta, Terazza, and Lamell
louvres. In type 1 and type 2 there is also a double
cell design option.
4–5. The installation and connection of the lumi-
naire is easily made via the end-cap on both pen-
dant luminaires and on surface mounted models. In
DTI type 1 (for surface mounted installation) there
is a knock-out in the end-cap for a surface mounted
cable.
6. Pendant luminaires type 2 and type 3 are
equipped with friction locks that simplify assembly
and adjustment of the wire suspension.
7–8. DTI is available with e-Sense and emLED. The
pictures show these equipped with a Beta louvre.
9–10. The marking on the end-cap, indicating the
luminaires’s light distribution, also creates an inter-
esting and attractive detail.
8810
pendant/surface

523
2⊗32/35 W, 2-cell
0%
100%
0%
100%
0%
100%
2⊗32/35 W, 1-cell1⊗32/35 W, 1-cell
A
D
W A B C D
13/14 765 141 59 600
25/28 1365 141 59 1200
32/35 1665 141 59 1500
45/49 1665 141 59 1500
50/54 1365 141 59 1200
73/80 1665 141 59 1500
25/28 1365 228 63 1200
32/35 1665 228 63 1500
B
C
DTI type 1
Beta
Suffix code
DTI in 2-cell design (1 lamp per louvre)
conforms to the requirements in
EN 12464-1.
When appropriate the sensor or emLED
unit is positioned in the first cell of the
louvre.
Luminaire
FDH kg
1-cell luminaire
1⊗13/14 2.6 28801 ■
1⊗25/28 2.8 28807 ■ ●
1⊗32/35 3.0 28809 ■ ●
1⊗45/49 3.0 28813 ■
1⊗50/54 2.8 28815 ■
1⊗73/80 3.0 28817 ■
2⊗13/14 2.6 28802 ■
2⊗25/28 2.8 28808 ■ ● ●
2⊗32/35 3.0 28810 ■ ● ●
2⊗45/49 3.0 28814 ■
2⊗50/54 2.8 28816 ■
2⊗73/80 3.0 28818
2-cell luminaire
2⊗25/28 3.8 28835 ■ ●
2⊗32/35 4.0 28836 ■ ●
1-cell luminaire asymmetrical
1⊗25/28 2.8 28971 ■
1⊗32/35 3.0 28972 ■
1⊗45/49 3.0 28973 ■
1⊗50/54 2.8 28974 ■
Installation
Surface mounted.
Connection
by the end-cap, with the option of
cable entry via the end-caps and
centre of the luminaire. 5-way snap-
in terminal blocks at each short
end with the possibility of 1-phase
through-wiring – excluding lumi-
naires supplied with e-Sense.
Design
Body of enamelled sheet steel in
white (RAL 9016) finish. End-caps of
polypropylene plastic.
Louvre
Reflector
The louvre acts as a reflector, the
luminaire is also equipped with a
top reflector.
Light distribution
Symmetrical.
Emergency lighting
emLED positioned in the first cell on
the louvre.
Dimming

523
A
D
W A B C D
13/14 765 141 59 600
25/28 1365 141 59 1200
32/35 1665 141 59 1500
45/49 1665 141 59 1500
50/54 1365 141 59 1200
73/80 1665 141 59 1500
B
C
1⊗32/35 W 2⊗32/35 W
0%
100%
0%
100%
pendant/surface
Installation
Surface mounted.
Connection
by the end-cap, with the option of
cable entry via the end-caps and
centre of the luminaire. 5-way snap-
in terminal blocks at each short
end with the possibility of 1-phase
through-wiring.
Design
Body of enamelled sheet steel in
white (RAL 9016) finish. End-caps of
polypropylene plastic.
Louvre
and aluminium enamelled cross-
opened. Earthed.
Reflector
The louvre acts as a reflector, the
luminaire is also equipped with a
top reflector.
Light distribution
Symmetrical.
Emergency lighting
emLED positioned in the first cell on
the louvre.
Dimming
Luminaire
FDH kg
1-cell luminaire
1⊗13/14 2.6 28901 ■
1⊗25/28 2.8 28907 ■
1⊗32/35 3.0 28909 ■
1⊗45/49 3.0 28913 ■
1⊗50/54 2.8 28915 ■
1⊗73/80 3.0 28917 ■
2⊗13/14 2.6 28902 ■
2⊗25/28 2.8 28908 ■
2⊗32/35 3.0 28910 ■
2⊗45/49 3.0 28914 ■
2⊗50/54 2.8 28916 ■
2⊗73/80 3.0 28918
Opening the end-cap provides easy
access for connections. DTI type 1 has
1-phase through-wiring as standard.
Suffix code
DTI type 1
Terazza

FAGERHULT | Fagerhult 2015 2016 catalogue

FAGERHULT | Fagerhult 2015 2016 catalogue

Recommended

Recommended

More Related Content

Similar to FAGERHULT | Fagerhult 2015 2016 catalogue

Similar to FAGERHULT | Fagerhult 2015 2016 catalogue (20)

More from Paulo Chong

More from Paulo Chong (20)

Recently uploaded

Recently uploaded (20)

FAGERHULT | Fagerhult 2015 2016 catalogue