1. Paul Oldham (IMCA) Air Diving Supervisor.
Pauloldham690@hotmail.com
D.O.B: 28/02/1969. Nationality: British.
Education: O-Levels: Mathematics, English,
Navigation, Chart work & Meteorology.
Home Phone: +351 282761745
Portugal Mobile: +351 965641898
Experience:
Left School in 1985, worked as an Apprentice Welder for 2 years with Weld mobile in Looe
Cornwall, and Qualified as a welder in all types of welding with City Of Guilds.
1987 – 1989 Worked for several welding companies then in 1989 Worked on the Beam
Trawlers for 12 years, worked my way up from Deck hand to Skipper. Skippered Beam
Trawlers for the last 5 years.
Qualified Air Diver in 2001 worked offshore as an Air diver until 2005 Subsea Inspection and
Construction.
Qualified Sat Diver in 2005, worked offshore a Closed bell Diver in Construction & Subsea
Inspection.
Qualified IMCA Air Diving Supervisor 2010, working offshore up until now in Construction &
Inspection.
Diving Qualifications:
IMCA Air Diving Supervisor ( 6407/UK/-
IMCA Ass Closed Bell Supervisor.
Wet Welding AWS D3.6 CLASS B Coding
CSWIP Underwater Inspector Grade 32u.
IMCA Dive Medical Technician
IMCA Closed Bell Part 2 Diving CB/040299/05.
Skipper Qualifications:
Class 2 Deck Officer Unlimited
Yacht Masters Offshore
G.M.D.S.S. Long range Offshore
D.O.T Signals.

2. 2
Offshore Job’s
Company: Mermaid Qatar Client: Maersk Date: August 2015
Position: Air Diving Supervisor. Location: Al Shaheen Field Qatar
Vessel: Topaz Salalah DP1.
Job: Inspection program on SPM Buoys 1, 2 & 3 Chain Wear, Chain Angle measurements,
Water and Oil hose Inspection from 125ft, Anode Inspection, Hull, Under Hull and Spider
Inspection. Conductor Stabilization on 10 Platforms.
Company: KD Marine Client: Blue Water Date: June-July 2015
Position: Air Diving Supervisor. Location: North Sea
Vessel: Haewene Brim FPSO
Job: Mooring repair, fitting of pin removal tool, Install 144mm mooring wire, removal of
118mm mooring wire, Installation of Bogey frame, recover of 118 socket, Installation of
114mm mooring wire, removal of Bogey frame and transfer of mooring wire to Anchor handle
vessel.
Company: Boskalis Client: Dubai Petroleum Date: May-June 2015
Position: Air Diving Supervisor. Location: Fateh Field Arabian sea
Vessel: Smit Komodo DSV
Job: Inspection program on several Platforms and Subsea Storage Tanks, ACFM, CP, UT &
Stills. SB1 & SB2 Plem Valve Operations.
Company: Red 7 Client: LAL Date: July to Oct 2014
Position: Air Diving Supervisor. Location: North Sea / Southern Sector
Vessel: VOS Shine DSV
Job: Offshore Wind Farm East of the Thames, Cable clamp Installation and CPS repair works.
Company: Technip Client: BP Date: March 2013 – May 2014
Position: Air Diving Supervisor. Location: West of Shetlands North Sea.
Vessel: FPSO Schiehallion.
Job: Quad 204 CVI of all pad eye’s subsea in turret, change out of lynx connector hydraulic
hoses & jack bolts, removal of R134 crown assembly support frame & protection modules, R81
crown assembly preparation, Installation of turret camera system & Rigging up subsea rigging
for disconnection of chain mooring system.

3. 3
Company: Stork Client: BP Date: Jan – Feb 2013
Position: Air Diving Supervisor. Location: Angola
Vessel: Seaway 10
Job: Maintenance on Great Plutunio SBM Buoy and hoses.
Company: Blue stream Client: GDF Date: Nov 2012
Position: Air Diving Supervisor. Location: North Sea / Dutch Waters
Vessel: OSV Stril Explorer (DP)
Job: Riser Installation, Hydro Tight Clamps.
Company: Stork Client: Chevron Date: Oct 2012
Position: Air Diving Supervisor. Location: North Sea / Captain FPSO
Vessel: Fugro Saltaire (DP)
Job: Aft Thruster change out.
Company: KD Marine Client: Blue water Date: Sep 2012
Position: Air Diving Supervisor. Location: North Sea
Vessel: Haewene Brim FPSO
Job: Mooring repair, fitting of pin removal tool, Install 144mm mooring wire, removal of
118mm mooring wire, Installation of Bogey frame, recover of 118 socket, Installation of
114mm mooring wire, removal of Bogey frame and transfer of mooring wire to Anchor handle
vessel.
Company: Stork Client: CNR Date: Aug 2012
Position: Air Diving Supervisor. Location: North Sea
Vessel: Seabed Prince (DP)
Job: Cofferdam Installation on Balmoral Platform & Inspection Program.
Company: KD Marine Client: Wood Group Date: June 2012
Position: Air Diving Supervisor. Location: North Sea
Vessel: Hummingbird FPSO
Job: Fairlead repair work, Bolt replacement & Inspection.
Company: Subsea 7 Client: Dong / BP Date: March – April 2012
Position: Sat Diver Location: North Sea / Danish & Denmark
Vessel: Seven Havila (DP)
Job: Dong Siri Caisson support permanent repair, Cutting tubular VDM on jack up tank with
grit cutting tool, Cason clamp Installation at -94m elevation, removal of Cason buoyancy tanks.

4. 4
Company: Subsea 7 Client: Dong / BP Date: Dec 2011- Jan 2012
Position: Sat Diver Location: North Sea / Danish & Denmark
Vessel: Seven Havila (DP)
Job: Dong Siri Caisson support permanent repair, Acoustic coring and seabed prep work.
Company: Technip Client: BP Date: Jun- Aug 2011
Position: Air Diving Supervisor Location: West of Shetlands / North Sea
Vessel: Schiehallion FPSO
Job: Moorings change out.
Company: ISS Client: Petrofac Date: June 2011
Position: Air Diving Supervisor Location: North Sea
Vessel: Heather A Platform
Job: Clamp Installation, Inspection program MPI, ACFM, CVI, GVI, CP & UT readings.
Company: Well Ops Client: Taqa Bratani LTD Date: March 2011
Position: Ass Sat Diving Supervisor Location: North Sea
Vessel: Well Enhancer (DP)
Job: Pelican W12 Inspection and testing operations at well W12 flow base, Falcon Deploy &
Install a camieron HXTat Falcon & Camieron and Vertco tree cap removal testing and
Installation.
Company: Well Ops Client: MOD Date: Feb 2011
Position: Ass Sat Diving Supervisor Location: North Sea
Vessel: Well Enhancer (DP)
Job: Tornado wreckage recovery.
Company: KD Marine Client: Prenco Date: Oct 2010
Position: Air Diving Supervisor Location: North Sea / Southern Sector
Vessel: Jack up Enhancer
Job: Well abandonment on three wellheads, Installing TRT & WOC plus various valve op’s.
Company: Smit Subsea Europe Client: Conoco Philips Date: July-Sep 2010
Position: Diver, 32u & DMT Location: North Sea
Vessel: EDT Protea
Job: Riser & Structures Inspection program, MPI, CVI, GVI & CP readings, and Valve ops on
several Manifolds.

5. 5
Company: Acergy Client: CNR Date: May 2010
Position: Sat Diver, 32u & DMT Location: North Sea
Vessel: Discovery (DP)
Job: - 147M UT mapping & Inspection on the pipe work to various slots on the Lyle field.
A.SDU valve ops & numerous SCM removals on the Lyle Manifold B. Then continue the NSP
weld inspection program on the Ninnian south at various elevations, using the Sonometic
Inspection gear and the Cgynus meter on the circumferential welds & access windows.
Company: KD Marine Client: Chevron Date: April 2010
Position: Air Diving Supervisor Location: North Sea / Captain FPSO
Vessel: Far Sovereign
Job: Fairlead repair work, Installation of securing pin& change all bolts both sides of the
fairleads.
Company: Well Ops Client: Shell Date: Dec 2009 – Feb 2010
Position: Sat Diver, 32u & DMT. Location: North Sea
Vessel: Well Enhancer
Job: Installation & Trials of a new 18-man Saturation system.
Company: Smit Subsea Europe Client: Dong Date: Sep – Oct 2009
Position: Diver, 32u & DMT. Location: North Sea
Vessel: EDT Protea (DP)
Job: 3 Piece spool tie in, inspection program on mono pile welds, ACFM, MPI, CVI, GVI,
photo’s, CP, UT & weld toe grinding with peanut grinder.
Company: KD Marine Client: BP Date: Aug 2009
Position: Trainee Air Diving Supervisor Location: North Sea / West of Shetlands
Vessel: Foinaven FPSO
Job: Thruster change out & Inspection program.
Company: OSS Client: BP Date: May – June 2009
Position: Sat Diver, 32u & DMT Location: Vietnam / Lan Tay
Vessel: Aqua Marine (DP)
Job: Subsea fault finding on Lan Tay Manifold, EH jumper change out, changing out SCM on
wellhead 5, Installation scouring matt’s around legs of platform, connecting & disconnecting
hoses from SUT & ACFM on K nodes.

6. 6
Company: Cape RB Hilton LTD Client: Aramco Date: Dec 2008- Jan 2009
Position: Trainee Air Diving Supervisor Location: Saudi Arabia
Vessel: Zamil 51 (DP)
Job: Installation of grout bags under pipelines at various depths, free span measurement and
post survey.
Company: Cape RB Hilton LTD Client: Aramco Date: Sep – Oct 2008
Position: Trainee Air Diving Supervisor Location: Saudi Arabia
Vessel: Zamil 51 (DP)
Job: Inspection program on sea island 4, MPI, CVI, GVI, CP, UT & grit blasting to SA 2.5 on
riser’s and structures legs.
Company: KD Marine Client: Petrofac Date: July – Aug 2008
Position: Trainee Air Diving Supervisor Location: North Sea
Vessel: Heather A platform
Job: Inspection program CVI, ACFM, and GVI, grit blasting weld joints at – 15m elevations.
Company: Blue stream NL Client: Maersk Date: May - June 2008
Position: Diver, 32u DMT Location: North Sea
Vessel: Northern River (DP)
Job: Removal of boat landing with diamond cutter & Broco burning. Inspection CVI, ACFM &
MPI.
Company: Hydro Weld Client: BP Date: Oct- Nov 2007
Position: Sat Diver, 32u & DMT Location: Aberdeen Hyperbaric Center
Job: Wet welding trials in sat in the Hyperbaric center Aberdeen.
Company: ISS Client: Total Date: June-Aug 2007
Position: Sat Diver, 32u & DMT Location: North Sea
Vessel: Bar Protector (DP)
Job: Riser clamp installation, removal of anodes, grit blasting and removal of stub’s with
milling machine.
Company: ISS Client: CNR Date: May-June 2007
Position: Diver, 32u & DMT Location: North Sea
Vessel: Balmoral FPV
Job: Inspection of vessel for DNV class certificate. CPI & Anode replacement. Installation of
sea chest blanks for removal and replacement internally.

7. 7
Company: KD Marine Client: Maersk Date: April 2007
Position: Diver, 32u & DMT Location: North Sea
Vessel: FPSO Curlew
Job: BSC Installation clamp project.
Company: Ocean Team Client: Blue water / Perenco Date: Dec 2006 - Feb 2007
Position: Diver, 32u & DMT Location: North Sea
Vessel: Fennica / Nortica (DP)
Job: Spool Installation of various 10” spools to a manifold, Installation of pig receiver &
relaying fiber optic cable. Hydro tight, rigging up 5 tone air bags on manifold & installing
concrete matts.
Company: Mermaid Client: Shell Date: Sep – Oct 2006
Position: Sat Diver, 32u & DMT Location: Malaysia
Vessel: Team Siam (DP)
Job: Installing jumper cable to sub sea umbilical termination unit (SUTU) on wellhead,
installing concrete Matts and removal of buoyancy tanks.
Company: KD Marine Client: Petrofac Date: June-July 2006
Position: Diver, 32u & DMT Location: North Sea
Vessel: Heather A Platform
Job: Sub sea clamp installation, weld cleaning, CVI, ACFM & cold cutting of damaged section
& anode removal from VDM.
Company: Hallin Marine Client: PTT Date: April- May 2006
Position: Sat Diver, 32u & DMT Location: Thailand
Vessel: Barge
Job: Installation of 42” spool piece, Metrology & Hydro tight.
Company: Fraser’s Client: Anglo Suisse Date: Jan- March 2006
Position: Sat Diver, 32u & DMT Location: Gulf of Mexico
Vessel: Adams Nomad (DP)
Job: Post Hurricane re-build, Installing spools from 8” to 16” & Metrology, sealing well heads,
Installing riser’s, fitting plidco smart flanges, use of cold cutting equipment, Broco &
Hydrotighting.
Company: Smit Client: Shell Date: Nov-Dec 2005
Position: Sat Diver, 32u & DMT Location: Yuhzno Sakhalin Island
Vessel: Barge

8. 8
Job: 30” spool tie in, Metrology, Hydro tighting.
Company: AME Client: Petronas Carigali Date: Aug-Sep 2005
Position: Sat Diver, 32u & DMT Location: Tamanna Field Malaysia
Vessel: Allied Commander (DP)
Job: Jacket & Riser Inspection Project GS, CVI, SPO, CPM, UT & FMD.
Company: Hallin Marine Client: CNOOC Date: July 2005
Position: Sat Diver, 32u & DMT Location: East China Sea
Vessel: Barge
Job: Spool tie in 28” gas line.
Company: AME Client: Petronas Carigali Date: June 2005
Position: Sat Diver, 32u & DMT Location: Samarans Field Asia
Vessel: Allied Commander
Job: Pipeline Inspection UT & CP readings, HP water jetting & subsea burning Broco &
Platform Inspection.
Company: Sarku Client: Shell Date: April-June 2005
Position: Sat Diver, 32u & DMT Location: SE Asia / M4 & B11 Field.
Vessel: Santabong (DP)
Job: Changing over sub sea control modules on well heads, locating Hydraulic leak on well
head, Full Platform Inspection at B11 field, CVI, SPO, UT, CP & MPI.
Company: AME Client: Petronas Carigali Date: Dec 2004-Feb 2005
Position: Diver, 32u & DMT Location: Samarans field Asia
Vessel: Sea Core Achiever (DP)
Job: Post inspection on field joints, UT, CP readings & Stills, Fiber wrapping field joints, PSO
completion and installation of repair brace on J bend riser. Sat support on Allied Commander.
Company: Smit Client: BP Date: Oct- Nov 2004
Position: Diver, 32u & DMT Location: Azerbaijan
Vessel: Chirac 1 drilling platform
Job: Close visual Inspection of welds at -29m elevation.
Company: HOSC Client: Maersk Date: Aug-Sep 2004
Position: Diver, 31u & DMT Location: Arabian Gulf
Vessel: Halu 32
Job: SBM floating hose removal, riser inspection and modification, riser clam inspection, GVI
and water jetting, torque wrenching bolts up on riser clamps and SBM chain measurement and

9. 9
fitting grating inside SBM.
Company: HOSC Client: Maersk Date: May-June 2004
Position: Diver, 31u & DMT Location: Arabian Gulf
Vessel: Halu 32
Job: Riser clamp Inspection, Torque wrenching riser clamp bolts, Installing conductor guide
wedges.
Company: SOSL Client: Shell Date: Oct- Dec 2004
Position: Diver, 31u & DMT Location: Nigeria
Vessel: KCDP-B Platform
Job: Decommission and Installation of 2 Platforms, Subsea burning and cutting legs off with a
Diamond cutter clamp.
Company: SOSL Client: Shell Date: May- Aug 2003
Position: Diver, 31u & DMT Location: Nigeria
Vessel: KCDP-B Platform
Job: Decommission and Installation of 2 Platforms, Subsea burning and cutting legs off with a
Diamond cutter clamp.
Company: Tuskar Rock Marine Client: Dublin Harbor Date: Jan-Feb 2003
Position: Diver, 31u & DMT Location: Dublin Harbor
Vessel: Dublin
Job: Pipeline leveling, Inspection program GVI & CVI, Airlifting & HP water jetting & Denzo
wrapping and bagging.