1. A note to our customers, parts managers and dealers:
This manual has been prepared to assist you in the proper use, daily care, and operation of
your new Kuhn Krause equipment. It contains specific information on the many built--in
features of your equipment, the accessories and options that are available, general
specifications, and instructions for making minor adjustments.
Read this manual carefully before operating your Kuhn Krause equipment, and keep it in a
convenient location for later reference.
In order to ensure that you have the most current ownerโs manual available for your
implement, we have added a revision code to each manual. Please note the information
listed below and specify when placing service calls or ordering parts.
Manual for Model: 5200NT
This manual covers models beginning with Serial No. 2601
Ownerโs Manual #: 5200N--1E
Parts Manual #: 5200N--2E
ISSUED TO: ISSUED BY:
Ownerโs Name Kuhn Krause Dealer
Mailing Address City
City State
State Date of Purchase
Printed NOV11 SN 2671
2.
3. KUHN KRAUSE WARRANTY STATEMENT
(Kuhn Krause Serial Numbered Wholegoods purchased subsequent to May 1, 2008)
Note: This warranty is limited to the equipment and parts sold in North America and all
warranty work must be accomplished by a Kuhn Krause, Inc. Authorized Service
Center rated to perform maintenance on Kuhn Krause Products.
A. KUHN KRAUSE, INC. (โKRAUSEโ) LIMITED WARRANTY.
(1) Subject to the limitations and conditions hereinafter set forth, Kuhn Krause warrants, at the time of
delivery by Kuhn Krause to be free from (i) defects in materials or workmanship, and (ii) defects in
design that in the view of the state of the art as of the date of manufacture should have been foreseen
provided, however, that the defect must be discovered and reported to Kuhn Krause within the periods
specified as follows. For a period of one year all new serial numbered production agricultural units
covered by this warranty; for a period of thirty--six (36) months the tongue weldment, center frame
weldment, wing frame weldments, disc harrow gang bearings and K--Tine field cultivator shanks.
(2) Kuhn Krause does not warrant disc blades, shanks, hydraulic cylinders, accessories and other parts
not manufactured by it, but supplied with or as a part of its products. Kuhn Krause will, however,
obtain and pass on any adjustments provided by the manufacturers of such parts under these
manufacturerโs warranties. Tires supplied on Kuhn Krause products, will be warranted by the tire
manufacturerโs retail outlets.
(3) The entire extent of Kuhn Krauseโs liability shall be limited to that of either reimbursing Buyer for
its costs of purchasing a rebuilt, over--hauled or repaired part from either Kuhn Krause or a proper
Kuhn Krause Authorized Service Center or, at Kuhn Krauseโs election, reimbursing buyer for its costs
of having the part repaired at a proper Kuhn Krause Authorized Service Center. If Kuhn Krause elects
not to repair the part and if neither a rebuilt, over--hauled or repaired part is, in Kuhn Krauseโs
opinion, timely available then Kuhn Krause will reimburse buyer for its costs of purchasing a new part
from either Kuhn Krause or a proper Kuhn Krause Authorized Service Center. The labor necessary
to remove from the product such part or parts and to install in the product such part or parts, as well
as any repair made as the result of improper installations by Kuhn Krause, shall be covered by this
warranty, provided the work is performed at a proper Kuhn Krause Authorized Service Center.K If
return of the defective part is required, it must be returned shipping prepaid to Kuhn Krause, Inc.
Kuhn Krauseโs limited warranty will apply to any part repaired or replaced by a proper Kuhn Krause
Authorized Service Center pursuant to Kuhn Krauseโs Limited Warranty: however, the applicable
warranty for such part repaired or replaced shall be limited to the unexpired portion of Kuhn Krauseโs
Limited Warranty described in paragraph (1) or (2) above, as applicable. In other words, the warranty
period of the part repaired or replaced does not start over from the date of reinstallation.
K[Kuhn Krause, Inc. will repair or replace, free of charge, any part of the product found to be defective,
within the specified warranty periods, after an inspection of the part has deemed it to be defective.
Inspection must be performed by an authorized agent of Kuhn Krause, Inc. or returned to the Kuhn
Krause factory for inspection and disposition. Warranty labor will be considered during the first year
of warranty only. Kuhn Krause, Inc. will establish and publish an hourly flat rate for shop labor and
reimbursement during the first year of the warranty period. Kuhn Krause does not allow credit for the
cost of travel time, mileage or hauling as a warranty allowance. During the remaining second and third
year, when applicable, Kuhn Krause will repair or replace the defective part, without consideration of
labor charges.]
(4) Routine services (such as inspections, field settings, adjustments, etc.) and replacement of items which
deteriorate from expected normal wear and tear or exposure (such as paint, tires, hoses, blades,
sweeps, points, shank wear strips, etc.) are not covered by this Limited Warranty. Such routine
services and replacements required during the course of operation are not considered to be the result
of any defect in the product.
4. B. LIMITATIONS APPLICABLE TO KUHN KRAUSEโS LIMITED WARRANTY.
(1) Kuhn Krause, Inc. will be relieved of all obligations and liability under this warranty if:
(i) The alleged defect in the part is due to misuse or neglect on the part of someone other than Kuhn
Krause; or
(ii) Kuhn Krauseโs identification mark or name or serial number has been removed from the part in
question; or
(iii) The product and/or equipment have not been maintained, operated or stored either in accordance
with applicable manuals, communications or other written instructions of Kuhn Krause or any
manufacturer of the part involved, or in accordance with applicable regulations and advisory
circulars unless buyer shows that such maintenance, operation or storage was not a contributory
cause of the defect; or
(iv) The part in question has been modified or altered after delivery other than by the manufacturer
or in accordance with a modification or alternation scheme approved in writing by the
manufacturer; or
(v) The product is used for purposes other than conventional owner/operator usage. Usage not
considered conventional owner/operator includes, but is not limited to, operation conditions that
consist of rocks or other obstructions.
(2) For the purpose of this Warranty, no part of the product or equipment will be regarded as breaching
the limited warranty merely because, subsequent to its delivery, some modification or alteration
becomes necessary for product improvements or in order to meet a change in the requirements of any
applicable regulation.
(3) TO THE EXTENT ALLOWED BY APPLICABLE LAW, BUYER WAIVES AS TO KUHN KRAUSE ALL
OTHER WARRANTIES, WHETHER OF MERCHANTABILITY, FITNESS OR OTHERWISE, THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACT HEREOF.
(4) TO THE EXTENT ALLOWED BY APPLICABLE LAW, THE OBLIGATIONS OF KUHN KRAUSE
SET FORTH HEREIN SHALL BE THE EXCLUSIVE REMEDIES FOR ANY BREACH OF
WARRANTY HEREUNDER, AND, TO THE SAME EXTENT, KUHN KRAUSE SHALL NOT BE
LIABLE FOR ANY GENERAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, ANY DAMAGES FOR DIMINUTION OF MARKET VALUE, LOSS OF
USE OR LOSS OF PROFITS, OR ANY DAMAGES TO THE PRODUCT CLAIMED BY BUYER OR
ANY OTHER PERSON OR ENTITY UPON THE THEORIES OF NEGLIGENCE OR STRICT
LIABILITY IN TORT.
(5) ANY ACTION BY BUYER FOR BREACH OF THIS WARRANTY BY EITHER KUHN KRAUSE OR
SELLER MUST BE COMMENCED WITHIN (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES.
5.
6.
7. 1
5200NT SERIES GRAIN DRILL
DEALER PREDELIVERY CHECK SHEET
TO BE CHECKED BY DEALER
CUSTOMER DATE
ADDRESS COUNTY
DEALER
ADDRESS COUNTY
MODEL NUMBER SERIAL NUMBER
DEALER CHECK:
1. Check to see that hydraulic cylinders are full of oil (air purged from cylinders). Clevis pins
with hair pin clips should be in place. The basic drill hydraulic system requires
approximately 10 Quarts / 9.4 Liters of oil. In addition, the dual markers require
approximately 4.0 Quarts / 3.8 Liters of oil.
2. Examine hydraulic hoses to see that they are protected from damage.
3. Check lug bolts holding wheels to the hubs to see that they are torqued from to 120 Ft.
Lbs. / 163 N โ m.
4. Check opener pivot bolts for tightness.
5. Check for correct size tires: 9.5L x 15, 12--Ply tires should be inflated to 44 P.S.I. / 302 kPa
11L x 15, 8--Ply tires should be inflated to 36 P.S.I. / 248 kPa
31 x 13.5, 8--Ply tires should be inflated to 40 P.S.I. / 275 kPa
6. Check to see that feed shafts turn freely -- rotate drive / gauge wheel.
7. Jack should be operational for support of tongue when implement is not attached to a
tractor.
8. Transport locks should be correctly installed and should operate satisfactorily.
9. All decals are in place.
10. Customer review sheet is filled out and mailed.
11. Review lighting requirements. Light kits are standard.
12. Check to see that the Ownerโs Manual is in the storage canister.
13. Check to see that SMV sign is clean and in place.
DELIVERED BY:
DATE:
8.
9. 3
Contents Rev. 2/09
WARRANTY
DEALER PREDELIVERY CHECK SHEET 1
CUSTOMER REVIEW SHEET 2
SPECIFICATIONS 4
GENERAL INFORMATION PHOTOS 5
SAFETY DECALS 6
OPERATING SECTION
SUGGESTED PROTECTIVE GEAR O1
SAFETY FIRST O2
RESIDUE MANAGEMENT O3
GENERAL DESCRIPTION O3
PREPARING THE TRACTOR O3
HYDRAULIC SYSTEMS O4
HITCHING TO THE TRACTOR O4
Standard Drawbar O4
Optional 3--Point Hitch Kit O5
UNHITCHING FROM THE TRACTOR O6
TRANSPORTING O6
COULTER TRASH BLADES O7
DIGITAL LAND METER O8
HYDRAULIC MARKER ACCESSORY O8
DOUBLE DISC FIELD ADJUSTMENT O10
DEPTH ADJUSTMENT (PRO) O10
OPENER DOWN PRESSURE (PRO) O11
DEPTH ADJUSTMENT (HR PRO) O11
OPENER DOWN PRESSURE (HR PRO) O11
INSIDE SCRAPER SETTING O12
COULTER SWING STOP O12
WEIGHT TRANSFER ADJUSTMENT O12
DRIVE WHEEL ADJUSTMENT O13
FIELD SETTINGS AND ADJUSTMENT GUIDE O13
Initial Setting For No--Till Application O13
COMMON CAUSES OF PLUGGING O15
IMPORTANCE OF CHECKING QTY. DRILLED O15
HOW TO CHECK QUANTITY DRILLED O16
Method Two O16
Method Three O17
SETTING GRAIN FEEDS O17
DRIVE CHAINS O19
LOW SPEED OPTION -- SINGLE WHEEL DRIVE O19
FEED CUP REAR GATE O20
DRILLING ROW CROPS O20
SEEDING RATE CHARTS O21
STAND COUNTS CHART O22
INDEX SETTING CHART O23
GRAIN SEED CHARTS O24--O27
FERTILIZER SYSTEM O28
FERTILZER DRIVE BOX & CHAINS O29
FERTILIZER FEED CUP FLUTE SETTING O30
USING WHOLE TANK CAPACITY FOR GRAIN O30
FERTILIZER SPROCKET SETTINGS O31
FERTILIZER CHARTS 032--O33
LEGUME SEED ATTACHMENT OPERATION O34
Seed Shaft and Seed Cup Adjustments O34
Drop Tube Installation O34
LEGUME SEED CHARTS O35--O38
SERVICING O39
General Maintenance O39
Lubrication O39
Wheel Bearings -- 10 Ft. Drill O39
HYDRAULIC SAFETY - READ CAREFULLY O39--O40
DOUBLE DISC BLADE ADJUSTMENT O40--O41
STORAGE O41
REPAIR PARTS O41
TROUBLESHOOTING O42--O43
HYDRAULIC SERVICE SECTION O44
PARTS SECTION
FRAME ASSEMBLY P1--P2
FRAME, TONGUE/WEIGHT TRANSFER ASSM. P3
3--PT. HITCH ATTACHMENT P4
JACK ASSEMBLY P5
TREADWALK, SUPPORT ARM, WEIGHT TUBE P6--P7
TREADWALK & OPENER MOUNTING P8--P9
REAR CARRIER WHEEL ASSEMBLY -- 10โ P10
REAR CARRIER WHEEL ASSY -- 13โ, 15โ,20โ P11
R.H. SINGLE GAUGE WHEEL ASSY--Option P12
R.H. DUAL GAUGE WHEELS -- 13โ & 15โ Models P13
SINGLE DRIVE WHEEL ASSEMBLY P14--P15
DUAL DRIVE WHEEL ASSEMBLY P16--P17
WHEELS & TIRES / CHAIN & IDLER P18--P19
MANUAL TRANSMISSION P20--P21
FERTILIZER CHAIN IDLER & SPROCKET BOX P22--P23
FERTILIZER DRIVE BOX ASSEMBLY P24--P25
TANK / SEED & FERTILIZER SHAFT ASSEMBLY P26--P27
FERTILIZER TANK ASSEMBLY P28--P29
AGITATOR SHAFTS & DRIVE P30--P31
LEGUME SEEDER ATTACHMENT P32--P33
SEED CUP / DROP TUBE ASSEMBLIES P34--P35
SPRING ADJ. TOOL & SPRING ROD ASSY P36
PRECISION OPENER NO--TILL (PRO) P37
PRECISION OPENER ASSEMBLY (HR PRO) P38--P39
HR PRO DISC BLADES / PRESS WHEEL ASSY P40--P41
PRESSWHEEL ARMS P43
COULTER ASSEMBLY P44
HYDRAULICS P45--P46
MARKER ASSY (10โ, 13โ) / DUAL MARKER 15โ, 20โ P47--P48
MARKER HYDRAULICS P49--P50
3โ x 5โ PRINCE HYDRAULIC CYLINDER P51
4โ x 10โ PRINCE HYDRAULIC CYLINDER P52
3--1/2โ x 10โ PRINCE HYDRAULIC CYLINDER P53
3--3/4โ x 10โ PRINCE HYDRAULIC CYLINDER P54
3โ x 10โ PRINCE CYLINDER (Marker ) P55
DECALS & REFLECTORS P56--P57
LIGHT KIT P58
ASSEMBLY SECTION
SAFETY A1
ASSEMBLY AREA A1
PART LOCATIONS A1
ASSEMBLY STEPS A1
MODEL NUMBER A1
HITCH INSTALLATION A2
CARRIER WHEEL/DRIVE INSTALLATION A3
DIGITAL LAND METER A4
DRIVE INSTALLATION, LIGHT KIT INSTALLATION A5--A6
NO--TILL CHAIN ROUTING ILLUSTRATIONS A7
MARKER ACCESSORY A8--A9
DUAL MARKER HYDRAULICS A10
3--POINT HITCH INSTALL. & SET--UP A11
DRIVE PLACEMENT DRAWINGS A13--A25
5200NT--10 A13
5200NT--13 , SINGLE & DUAL A14
5200NT--15 , SINGLE & DUAL A15
5200NT--20 A16
5200NT--20 DUAL A17
DRIVE w/FERTILIZER PLACEMENT DRAWINGS
5200NT--10 A18
5200NT--13 , SINGLE & DUAL A19
5200NT--15, SINGLE & DUAL A20--A21
5200NT--20, SINGLE A22--A23
5200NT--20, DUAL A24--A25
5200NT Parts index Index 1--6
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29. P15
SINGLE DRIVE WHEEL ASSEMBLY (LEFT SHOWN)
FOR MODELS -- ALL MAY11
Item Part Number Part Description Qty.
1 5510--119--0A Tire Left Drive Wheel Assm -- Shown 1
5520--120--0A Tire Right Drive Wheel Assembly 1
2 5210--48--0 Strut Assembly (Includes #21) 1
3 5510--50--0B Left Bearing Plate--10โ x 7.4โ Fertilizer,
13โ, 15โ, 20โ Left
1
5520--55--0B Left Bearing Plate--10โ x 10โ Fertilizer,
10โ, 20โ Grain
1
4 5510--51--0B Right Bearing Plate--10โ x 7.4โFertilizer,
13, 15, 20โ Left
1
5520--56--0B Right Bearing Plate--10โ x 10โ Fertilizer,
10โ, 20โ Grain
1
5 40--139 Bearing 2
6 63--143 5/16NC Hex Flange Serrated Nut 6
7 63--107 1/2NC Lock Nut 8
8 65--114 1/4NPT Self Tapping Zerk 2
9 62--151 1/2NC x 3โ GD5 Cap Screw 1
10 5210--40--6 Idler Arm 1
11 64--110 5/8โ STD. Flat Washer 2
12 64--109 5/8โ STD. Lock Washer 6
13 63--109 5/8NC Hex Nut 6
14 5210--40--2A Spindle 1
15 5210--40--1 Hub 1
16 63--110 5/8NC Lock Nut 1
17 62--295 Wheel Bolt 6
18 62--339 5/8NC x 4--1/2โ GD. 5 Cap Screw 3
19 53--108 Wear Sleeve 2
20 42--127 Seal 2
21 41--114 Bearing Cone 2
22 41--219 Bearing Cup 2
23 65--101 1/8NPT STD. Zerk 1
24 5210--45--0 Anchor Weldment 1
25 64--167 Special Washer 1
26 63--205 1--1/4NF Slotted Hex Nut 1
27 60--710 1/4โ DIA. x 2--1/2โ Cotter Pin 1
28 5210--40--20B Sprocket -- 20 Tooth 1
29 60--236 1/4โ DIA. x 1--3/4โ CLevis Pin 2
30 5210--40--13B Sprocket -- 13 Tooth 1
31 60--719 3/32โ DIA. x 1--7/8โ Cotter Pin 2
32 62--439 5/8NC x 5โ GD5 Cap Screw 2
33 5210--0--5007 Idler Sprocket 1
34 5210--47--0 Bracket Shield 1
35 62--445 1/2NC x 14โ Cap Screw 2
36 5210--40--5 Spacer Pipe 2
37 98--428 Digital Land Meter 1
38 5510--49--0 Spring Anchor Weldment -- 13โ, 15โ, 20โ 1
5250--358--0 Spring Anchor Weldment--10โ 1
39 62--217 3/4NC x 7--1/2โ Cap Screw 2
40 4616--0--19 Spring 1
41 60--223 1โDIA. x 4โ Clevis Pin 1
42 5210--128--0A 50 Chain Assembly 71--1/4โ Lg 1
43 5030--104--5B Sprocket -- 31 Tooth 1
44 5215N--1--4B Sprocket -- 47 Tooth 1
45 60--120 1/4โ Klick Pin 1
Item Part Number Part Description Qty.
46 5030--104--7 Stop Collar 3
47 62--381 Set Screw 4
48 63--112 3/4NC Hex Nut 4
49 64--112 3/4โ STD. Lock Washer 4
50 61--196 3/4โ DIA. U--Bolt 1
51 5430--0--27 Jack Shaft (10โ Drill) 1
5510--101--4 Jack Shaft (13โ Drill) 1
5510--101--4 Jack Shaft (15โ Drill) 1
5510--101--4 Jack Shaft (20โ Drill) 2
52 60--101 5/16โ DIA. Klik Pin 1
53 5210--21--0 Left Drive Shield-- 13โ, 15โ 20โ Left 1
5210--22--0 Right Drive Shield--10โ x 10โ Fertilizer, 20โ
Right
1
5250--21--0 Left Drive Shield -- 10โx7.4โ Fertilizer 1
5250--534--0 Drive Shield -- 10โ Grain 1
54 62--163 1/2NC x 8โ Cap Screw 1
55 98--150 Screw Assembly 1
56 98--151 Retainer 1
57 64--108 1/2โ STD. Flat Washer Vary
58 62--377 1/2NC x 4โ GD5 Cap Screw 2
59 44--207 Donut Spacer (rubber) 1
60 45--109 Flangette 4
61 5510--443--2 Strap 2
62 60--703 3/16โ DIA. x 1--3/4โ Cotter Pin 1
63 9060--1--14 Spring 1
64 5210--49--0 Turnbuckle Assy (items 65--71) 1
65 5210--32--0 Yoke Weldment (Left) 1
66 5210--33--0 Yoke Weldment (Right) 1
67 5210--36--0 Turnbuckle Weldment 1
68 63--123 1--1/4NC Hex Nut 1
69 60--222 1โ DIA. x 3--1/2โ Clevis Pin 2
70 60--717 #4 Hair Pin Cotter 2
71 65--101 1/8โSTD. Zerk 2
72 5210--46--0 Strap Weldment 1
73 5510--119--1 Bushing 1
74 64--113 3/4โ STD. Flat Washer 1
75 63--114 3/4NC Self Locking Nut 1
76 5510--0--27 Bearing Bracket -- 15โ, 20โ 1
77 61--265 1/2โDIA. U--Bolt-- 15โ, 20โ 1
78 64--107 1/2โ STD. Lock Washer-- 15โ, 20โ 2
79 63--106 1/2NC Hex Nut-- 15โ, 20โ 2
80 45--109 Flangette-- 15โ, 20โ 2
81 40--139 Bearing-- 15โ, 20โ 1
82 62--364 5/16NC x 3/4โ Carriage Bolt -- 15โ, 20โ 3
83 63--143 5/16NC Hex Flange Serrated Nut -- 15โ,
20โ
3
84 62--195 3/4NC x 2--1/2โ GD5 Cap Screw 1
85 63--147 1/2Hex Jam Lock Nut 1
30.
31.
32.
33.
34.
35. P21
MANUAL TRANSMISSION
FOR MODELS -- ALL MAY08
Item Part Number Part Description Qty.
1 40--139 Bearing 3
2 44--207 Donut Spacer (Rubber) 5
3 45--109 Flangette 6
4 60--101 5/16โ DIA. Klick Pin 2
5 60--120 3/16โ DIA. Klick Pin 1
6 61--263 U--Bolt, 1/2โ DIA. x 4--1/16โW x 7--1/4โ L (10โ Model) 1
7 61--265 1/2โ DIA. U--Bolt 2
8 62--118 3/8NC x 2--1/2โ GD5 Cap Screw 1
9 62--154 1/2NC x 3--1/2โ GD5 Cap Screw 1
10 62--364 5/16NC x 3/4โ Round Head Short Square Neck Bolt 3
11 62--372 1/2NC x 2--1/2โ GD5 Cap Screw 1
12 62--415 3/8NC x 1--3/4โ GD5 Cap Screw 4
13 62--420 1/2NC x 1--1/4โ GD5 Cap Screw 1
14 62--436 3/8NC x 1--1/4โ GD5 Cap Screw 1
15 62--547 1/2NC x 6--1/2โ GD5 Cap Screw 1
16 62--623 1/4NC x 1/2โ Square Head Cup Point Set Screw 3
17 63--102 3/8NC Hex Nut 1
18 63--106 1/2NC Hex Nut 7
19 63--107 1/2NC Lock Nut 4
20 63--134 3/8NC Nylon--Top Lock Nut 1
21 63--143 5/16NC Hex Flange Serrated Nut 9
22 64--103 3/8โ STD. Lock Washer 1
23 64--104 3/8โ STD. Flat Washer 1
24 64--107 1/2โ STD. Lock Washer 7
25 64--108 1/2โ STD. Flat Washer 7
26 64--155 1โ SAE Flat Washer 6
27 72--260 Connecting Link RC40 2
28 72--572 Idler Sprocket 2
29 5030--104--3B Sprocket (13 Tooth) 1
30 5030--104--7 Stop Collar 3
31 5250--0--17 Sprocket (17 Tooth) 2
32 5250--0--28A Sprocket (28 Tooth) 2
33 5250--0--40 Sprocket (40 Tooth) 2
34 5250--0--41 Lever 1
35 5250--0--42 Bushing 2
36 5250--0--44 Bushing 1
37 5250--0--46 Jack Shaft -- 10โ Model 1
5250--0--50 Jack Shaft -- 13โ Model 1
5250--0--43 Jack Shaft -- 15โ Model 1
5250--0--47 Jack Shaft -- 20โ Model 2
38 5250--345--0 Bearing Support Weldment (10โ Model) 1
39 5250--35--0 Guide Weldment 1
40 5250--353--0 Sprocket Weldment #40 x 70T 7/8 Hex Ultra Low Speed 1
41 5250--354--0 Sprocket Cluster Assembly 2
42 5250--36--0 Bearing Bracket Weldment -- Left (15โ & 20โ Models) 1
5250--37--0 Bearing Bracket Weldment -- Right (13โ & 20โ Models) 1
43 5250--480--1 Chain RC40 17 Links Ultra Low Sprocket 1
44 5250--529--1 Chain RC40 -- 151 Links 1
45 5250--537--0 Shield Bracket 1
46 5430--0--27 Jack Shaft -- 10โ Model 1
5510--101--4 Jack Shaft -- 13โ, 15โ Models 1
5510--101--4 Jack Shaft -- 20โ Models 2
47 5510--0--27 Bearing Bracket 1
48 5510--105--21 Sprocket (21 Tooth) 1
49 9060--1--14 Spring 1
36.
37.
38.
39.
40.
41.
42.
43. P29
FERTILIZER TANK ASSEMBLY
FOR MODELS -- ALL APR07
Item Part Number Part Description Qty.
1 62--368 1/4NC x 1/2โ Round Head Short Square Neck Bolt Vary
2 62--370 1/4NC x 3/4โ GD5 Round Head Short Square Neck Bolt Vary
3 62--681 1/4NC x 5/8โ Round Head Short Square Neck Bolt Vary
4 63--141 1/4NC Hex Flange Nut Vary
5 99--223 Knob Vary
6 5210--0--86 Clip, Long Vary
7 5210--0--87 Clip, Short Vary
8 5210--0--88 End Filler Plate Vary
9 5210--0--90 Divider Mount Plate Vary
10 5210--0--91 Divider Mount Plate Vary
11 5250--0--80 Tank Divider Flap -- 10โ Vary
5213--0--80 Tank Divider Flap -- 13โ Vary
5215--0--80 Tank Divider Flap -- 15โ (shown) Vary
5210--0--80 Tank Divider Flap -- 20โ Vary
12 5250--0--81 Spill Flap -- 10โ Vary
5213--0--81 Spill Flap -- 13โ Vary
5215--0--81 Spill Flap -- 15โ (shown) Vary
5210--0--81 Spill Flap -- 20โ Vary
13 5250--0--82 Top Hinge -- 10โ Vary
5213--0--82 Top Hinge -- 13โ Vary
5215--0--82 Top Hinge -- 15โ (shown) Vary
5210--0--82 Top Hinge -- 20โ Vary
14 5250--0--83 Tank Bottom, Fertilizer -- 10โ Vary
5213--0--83 Tank Bottom, Fertilizer -- 13โ Vary
5215--0--83 Tank Bottom, Fertilizer -- 15โ (shown) Vary
5210--0--83 Tank Bottom, Fertilizer -- 20โ Vary
15 5250--0--85 Bottom Hinge -- 10โ Vary
5213--0--85 Bottom Hinge -- 13โ Vary
5215--0--85 Bottom Hinge -- 15โ (shown) Vary
5210--0--85 Bottom Hinge -- 20โ Vary
16 5250--0--89 Flat Divider Panel -- 10โ Vary
5213--0--89 Flat Divider Panel -- 13โ Vary
5215--0--89 Flat Divider Panel -- 15โ (shown) Vary
5210--0--89 Flat Divider Panel -- 20โ Vary
17 5250--0--92 Hinge Back Up Plate -- 10โ (55--5/16โ long) Vary
5213--0--92 Hinge Back Up Plate -- 13โ (38โ long) Vary
5215--0--92 Hinge Back Up Plate -- 15โ (shown) (44โ long) Vary
5210--0--92 Hinge Back Up Plate -- 20โ (59โ long) Vary
18 5250--0--93 Hinge Back Up Plate -- 10โ Left Vary
5250--0--94 Hinge Back Up Plate -- 10โ Right Vary
5213--0--93 Hinge Back Up Plate -- 13โ Vary
5215--0--93 Hinge Back Up Plate -- 15โ (shown) Vary
5210--0--93 Hinge Back Up Plate -- 20โ Vary
19 5250--0--91 Hinge Back Up Plate -- 10โ (52--5/16โ long) Vary
5213--0--94 Hinge Back Up Plate -- 13โ (35โ long) Vary
5215--0--94 Hinge Back Up Plate -- 15โ (shown) (41โ long) Vary
5210--0--94 Hinge Back Up Plate -- 20โ (56โ long) Vary
44.
45.
46.
47. P33
LEGUME SEEDER ATTACHMENT
FOR MODELS -- ALL MAY11
Item Part Number Part Description Qty.
1 25--127 Hose Clamp 3/4โ I.D. 1
2 44--213 Adapter Gasket 1
3 60--236 Clevis Pin 1/4โD X 1--7/8 4
4 60--247
Clevis Pin 3/16โDx 1 (13โ, 15โ & 20โ
only)
2
5 60--601 Roll Pin 1/8โD x 1 2
6 60--602 Roll Pin 3/16โD x 1 1
7 60--719 Cotter Pin 3/32โD x 3/4 4
8 60--727
Cotter Pin 1/16โDx1/2 (13โ,15โ & 20โ
only)
2
9 61--184 U--Bolt 6
10 62--108 Cap Screw 3/8NC x 1โGD5 2
11 62--111
Cap Screw 3/8NCx 1--1/2โGD5
(13โonly)
2
12 62--151 Cap Screw 1/2NC x 3โGD5 2
13 62--343 Cap Screw 1/2NC x 2โGD5 1
14 62--360 Socket Hd Set Screw 1/4NCx1/4โ 2
15 62--366
Rnd Head Short Sq Neck Bolt
3/8NC x 1โ
15
16 62--368
Rnd Head Short Sq Neck Bolt
1/4NC x 1/2โ
26
17 62--370
Rnd Head Short Sq Neck Bolt
1/4NC x 3/4โ GD5
2
18 62--420 Cap Screw 1/2NC x 1--1/4โGD5 1
19 62--453
Rnd Head Short Sq Neck Bolt
3/8NC x 1--1/2โ (13โ only)
2
20 62--519 Hex Washer Hd Screw #6 x 1/2โ 4
21 62--544 Cap Screw 3/8NC x 2โ GD5 1
22 62--551 Cap Screw 1/2NC x 2--1/4โ GD5 1
23 62--668 Thumb Screw 1/4NC x 1/2โ 2
24 63--100 Hex Nut 1/4NC 2
25 63--102 Hex Nut 3/8NC 5
26 63--107 Lock Nut 1/2NC 5
27 63--140 Hex Flange Nut 3/8NC 18
28 63--141 Hex Flange Nut 1/4NC 26
29 63--143 Hex Flange Nut 5/16NC 12
30 63--166 Hex Jam Nut 3/8NC 2
31 64--100 Lock Washer 1/4โ STD 1
32 64--103 Lock Washer 3/8โ STD 3
33 64--104 Flat Washer 3/8โ STD 1
34 64--108 Flat Washer 1/2โ STD 10
35 72--254 Connector Link #50 2
36 72--257 Offset Link #50 4
37 74--314 Decal, Seed Chart -- 6โ 1
74--315 Decal, Seed Chart -- 7.5โ 1
74--316 Decal, Seed Chart -- 10โ 1
38 74--631 Decal, Krause Pro System (small) 1
39 74--632 Decal, 5200NT (small) 1
40 74--634 Decal, Black Stripe 1
41 75--159 Plug, Vinyl 1โDIA 1
42 75--219 Hose Barb 3/4 to 3/4NPT 1
43 76--153 Compression Spring 1
44 76--227 Compression Spring 1
45 98--150 Screw Assembly 2
46 98--151 Retainer 2
47 98--208 Elastic Latch Assembly 2
48 98--247 Clear Flex Vinyl Tube -- 67โ 1
98--367 Clear Flex Vinyl Tube -- 76โ
Item Part Number Part Description Qty.
49 98--396 Grass Seed Cup Roll 1
50 98--397 Grass Seed Cup Gate 1
51 98--398 Grass Seed Cup Assembly 1
52 98--399 Grass Seed Cup Funnel 1
53 98--402 Retainer 1
54 3127--476--2 Chain 14 Link 3/16โDIA 2
55 5210--0--5004 Bushing 2
56 5210--0--5007 Sprocket RC50 (17 tooth) 4
57 5210--0--5010 Tank Spacer -- End 4
58 5210--0--5011 Tank Spacer -- Center 2
59 5210--0--5013 Support Rod -- 6.5โ Tank (13โ only) 2
5210--0--5014 Support Rod -- 7.5โ Tank (15โ only)
5210--0--5015 Support Rod -- 3M Tank (10โ only)
5210--0--5012 Support Rod -- 10โ Tank (20โ only)
60 5210--24--2 Decorative Trim (Bulk) 2ft
61 5210--260--12A Sprocket (33 tooth) 2
62 5210--260--8 Adjustment Wheel 1
63 5210--500--10 Bearing 3
64 5210--560--1 Collar 2
65 5210--560--2 Sight Glass 2
66 5210--560--4 Broached Spacer 1
67 5213--561--1 Right Seeder Shaft (13โ only) 1
5215--561--1 Right Seeder Shaft (15โ only)
5220--561--1 Right Seeder Shaft (20โ only)
68 5213--580--0 Tank Weldment, 6.5โ (13โ only) 2
5215--580--0 Tank Weldment, 7.5โ (15โ only)
5210--580--0 Tank Weldment, 10โ (20โ only)
5250--350--0 Tank Weldment, 3M (10โ only)
69 5213--581--0 Lid Weldment, 6.5โ (13โ only) 2
5215--581--0 Lid Weldment, 7.5โ (15โ only)
5210--581--0 Lid Weldment, 10โ (20โ only)
5250--351--0 Lid Weldment, 3M (10โ only)
70 5215--561--2 Coupler (13โ, 15โ & 20โ only) 1
71 5250--0--11 Chain RC50 17 Links 1
72 5250--0--18 Angle 1
73 5250--0--99 Chain RC50 159 Links 1
74 5250--352--0A Seeder Shaft Weldment (10โ only) 1
75 5250--47--0 Shield Bracket Weldment 1
76 5250--536--0A End Shield, Left (Legume Seeder) 1
77 5313--261--5 Square Hole Washer 2
78 5313--262--6A Adjustment Nut 2
79 5430--0--19 Idler Arm 1
80 5430--0--20 Idler Arm 1
81 5430--46--0 Shield Bracket Weldment 1
82 9060--1--14 Clipped Spring 1
83 5213N--562--1 Spacer (13โ only) 1
5220--261--1 Spacer -- ALL Models
84 5213N--564--0A Seeder Shaft Weldment (13โ only) 1
5215--563--0A Seeder Shaft Weldment (15โ only)
5220--563--0A Seeder Shaft Weldment (20โ only)