Sack handling solutions palamatic process

Sack
SOLUTIONS for
EMPTYING
COMPACTING
HANDLING
FILLING
G
TING
G
Powder Handling Solutions

CONTENT
01
I 04
Sacktip®: model
Sacktip® Enclosed:
Sacktip® Hygienic: with
manual bag dump station
I 18
I 20
Sack compactor
Vacuum sack lifter
Suction booth
Pouyès ring
I 28
Ergotip®
SAS®
Minislit®
Rotaslit®
Varislit®
Autotip®
I 50
Means that the equipment can be
installed in ATEX zone
Means that design and options can be
customised
Means that the equipment is available
for testing at PALAMATIC PROCESS
AVAILABLE
CUSTOM
MADE

Sack opening rate
4 - 6 sacks/min. 2 sacks/min. 4 - 6 sacks/min. 2 - 6 sacks/min. 6 sacks/min.6 sacks/min. 6 sacks/min.3 - 6 sacks/min. 6 - 12 sacks/min.
Sacktip® Sacktip®
Enclosed
Sacktip®
Hygienic
Custom made
manual unit
15 sacks/min.
Ergotip®
SAS®
Minislit®
Rotaslit®
Varislit®
Autotip®
Mobile station on wheels
Dust-proof door
Security screen
Sliding bars
Foldaway tray
Gravity roller table
Motorized infeed belt conveyor
Integrated sack compactor
Integrated dust collector
Integrated lump breaker
Clean In Place (C.I.P.)
Dosing and weighing
Hygienic application
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
CAPTION: x
-
x
x x x
x
x
x x x
-
x
x
x
x
-
-
x
x
x
x
-
-
Input TOR
Output TOR
Installed power (KW)
Power supply voltage
Service pressure (bar)
Average power consumption (KWh)
Compressed air consumption (Nm³/h.)
Dust collecting rate (m³/h.) -
-
-
Unloading range
F Basic configurations and applicable options
F Utilities
4 - 6 sacks/min.
Ergonomics
Sacktip®
2 sacks/min.
Ergonomics
& containment for
toxic products
Sacktip®
Enclosed
4 - 6 sacks/min.
Protection against
foreign bodies
Sacktip®
Hygienic
2 - 6 sacks/min.
Ergonomics, adapta-
bility to constraints
6 sacks/min.
Ergonomics and
safety for the
operator
Custom made
manual unit
Ergotip®
3 - 6 sacks/min.
Difficult products and
ATEX zones
SAS®
6 sacks/min.
High rate for all types
of sacks
Minislit®
6 sacks/min.
Robust manufactu-
ring for all types of
sacks
Rotaslit®
6 - 12 sacks/min.
High rate
Varislit®
15 sacks/min.
Very high rate and
automation
Autotip®
FlowMatic®
Page 04 Page 30Page 08 Page 34Page 12 Page 38Page 16 Page 42Page 28 Page 46
Sacks
02 03
FlFFlFlFFFFllFlFlFlFFFFFFFFFFlFFFFFllFFFFFFllFlFFFFllFlllFFFFFlFFFlowowowowowowoowowowowowowwowowowowowwwowowwwwowowowowowowoowowowwwowowowowwwowowoowowowwowowowoowowwowwoowwwwwwoowwwwwwwowowowwwwwwwoowwoooowwwwooowoowwoooowwowwwowMMMMMaMMMMMMMMMMMMMMMMMaMMaMaMaMaMMMMMMMaMMMMaMMMMMMMMMaMaMaMMMMMMMMMMMMMMMMMMaMaMMMMMMMMMaMaMMMMMMMMMMMMMaaaaMaaaMMMMMMMMaaMMMMMMMMMMMaMMMMMaMMMMMMMMMMMMMMMMaMMMMaaMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMaMMMMMMMMMMMMMMMMMMMMMMaaaaMMMMMMMMMMMMMMMMatittttiittttttttttititttic®
AVAILABLE
CUSTOM
MADE
AVAILABLE
CUSTOM
MADE
www.palamaticprocess.com/powder-machine/sack-solutions
Downloadable videos & plans on our website

Advantages
F The gas cylinders
-
-
F Internal sieve to support
the bags with sliding bars
F Ergonomic removable
table to put down sacks:
F Product outlet chute
adapted to each particular
case
and feet
I
Structure and parts in contact with the product: mild
Access door:
Sealing:
Finishes:
I
1.
2.
3.
4.
5.
a polye-
Rate:
Objective:
4 standard models:
S 800 - S 1000 - S 1200 - S 1400
04 05
-
-
Standard
collector fan
duty door
Hopper
Outlet for
Control
Vacuum sacks lifter
Nozzles/washing rotary
heads (CIP)
S800 S1000 S1200 S1400
I
I
Options
See all our options on
pages 18-19
cartridge
/manual-sack-opening-systems/standard
AVAILABLE
CUSTOM
MADE
Sacktip®
: manual bag dump station
Sacktip®

I
I
06 07
Models A B C D
Models A B C DModels A B C D
I
I
Models A B C D
Models A B C D
Models A B C D
AVAILABLE
CUSTOM
MADE
/manual-sack-opening-systems/standard
StandardSacktip®
: manual bag dump station
4 standard models:
S 800 - S 1000 - S 1200 - S 1400
Plans downloadable on www.palamaticprocess.com
Sacktip®

Advantages
F Glove box for handling
-
F Support - F Mirror-polished finishes F Side discharge chute for
the bag to maintain a clean
contained area
I
Structure and parts in contact with the material:
Access door:
Sealing:
Finishes:
4 standard models:
SE 800 - SE 1000 - SE 1200 - SE 1400
08 09
Dust containment
Hopper
Lump breaker
Drum unloading
08
pper
Rate:
Objectives:
Options
pages 18-19
I
SE 800 SE 1000 SE 1200 SE 1400
I
09
AVAILABLE
CUSTOM
MADE
Sacktip®
Enclosed: manual bag dump station
Sacktip®
Enclosed

10 11
4 standard models:
SE 800 - SE 1000 - SE 1200 - SE 1400
I I
I I
Models A B C D
Models A B C DModels A B C D
Models A B C D
AVAILABLE
CUSTOM
MADE
Dust containementSacktip®
Enclosed: manual bag dump station
Sacktip®
Enclosed

12 13
Gloves
Vacuum sacks lifter
Options
pages 18-19
Sacktip®
Hygienic : manual bag dump station Integrated sieve
Advantages
F Customized and inter-
changeable screen mesh
F Gas cylinder
the door
F (1) Mirror polish finish -
(2) Rounded corners
F Vibratory motor
I
I
Standard model SH 800
Possibility of customization I
Structure and parts in contact with the material:
Access door:
Sealing:
Finishes:
Easy access to the sifter including the screen mesh. Its design allows operators to clean and replace
the screen mesh in seconds.
Integrated sieve: protection against foreign bodies for a production without any impurities.
Solution for hygienical process F
AVAILABLE
CUSTOM
MADE
/manual-sack-opening-systems
Rate:
Objective: protection
Sacktip®
Hygienic

14 15
I I
I I
Standard model: SH 800
Integrated sieve
Sacktip®
Hygienic
Sacktip®
Hygienic: manual bag dump station

Painted steel, 304L stainless steel, 316L
stainless steel manufacturing
Manual bag dump station
-
16
I
Specific and reduced dimensions
Applications for toxic materials
Nuclear industry
Advanced containment
Manufacturing specific to the bulk material and work environment: steel, stainless steel, Hastelloy, Uranus B6,
Viton, Perbunan, Nitrile…
Surface treatment adapted to your powders: electropolishing, mirror polished, vulcanization, teflon
Process features integration: dosing, screening, milling, granulation,anti-bridging device, mechanical conveying
Ideal design for all types of bags
ATEX...
Custom Made
17
AVAILABLE
CUSTOM
MADE
/manual-sack-opening-systems/customized
CustomMade

OPTIONS
F
Easy lifting and handling of the bag.
F
It optimizes containment and enables the handling of toxic materials.
F
It guarantees the hygiene process by eliminating foreign substances.
F
To provide buffer storage upstream of the unloading system.
Manual bag dump station
18
F
They facilitate the flow and discharge of stored materials.
reduce retention.
F
This system ensures maximum ergonomics and safety by preventing the operator
from cutting and turning the bag.
F
Our lump breakers are the ideal solution to crush materials that tend to form
lumps.
-
F
Protect the operator against potential exposure to dust during unloading.
-
19
F
To inform the process of the quantity of powder introduced, the unloading
hopper can be mounted on load cells.
F
Rotative cleaning nozzles/heads - Clean In Place (CIP).
-
loading unit.

Sack Compactor
All types of sacks
20
Advantages
F Ergonomic access for
the operator
integrate a platform
I
-
Manufacturing:
-
-
Examples of possible
positionings
21
F Compacting screw F Handling wheels - F 100 % hermetic contai-
ment sheath,
tray
Compression ratio:
Positionings
TYPE OF SACKS
SIZE OF SACKS
in mm
NUMBER OF
LAYERS
COMPACTING RATE
Synthetic
I
Control
Compacting
ring
Compacted
AVAILABLE
CUSTOM
MADE
www.palamaticprocess.com/powder-machine/sack-solutions/sack-compactor
SackCompactor

22
Air filter for handling
Lifting head
Advantages
F Rubber bale
Protection cover
Oversized filter for
dusty bags
23
Advantages :
F Roller conveyor: F Vacuum sack lifter: fitted
elongation
F Hessian bags
Options
See all our options
on pages 18-19
I
F
-
F F F
F F
AVAILABLE
CUSTOM
MADE
www.palamaticprocess.com/powder-machinesack-solutions/bag-manipulator
//
Vacuum sack lifter
All types of sacks
VacuumSackLifter

-
I
Working width:
Manufacturing:
Finishes:
Frontal panels:
Air rate reached in open areas:
Air rate reached in dedusting piping:
ATEX grounding clamp
Weight:
Sack unloading unit
with dedusting panels
Small packagings
skid set up
25
Rate:
Installation:
Objective: to
Options
See all our options
on pages 18-19
24
F Suction booth on table F Suction booth with integrated
scale
F Suction booth for racking F Room for pre-weighing
Outlet Ø
L
H
AVAILABLE
CUSTOM
MADE
Suction booth
/industrial-vacuum/suction-booth
flap
SuctionBooth

for loading
-
Pouyès ring
Rate:
Installation:
Objectives:
26
F Simplified ring F Clamping ring for drum
filling
F Dedusting of the working
area
Advantages
F System connected directly
to the reactor for introducing
the reactor
I
Dropping area for the bag:
Manufacturing:
Finishes:
Coverage of the vacuum area:
Inclination of the ring:
Connection to suction device:
Connection to equipment:
Air rate reached in open areas:
Air velocity reached in dedusting piping:
ATEX grounding clamp
Weight:
27
I
AVAILABLE
CUSTOM
MADE
PouyèsRing

Ergotip®
28
F The working position of
the operator is effective and
safe.
F Integrated sack compactor F Holding bar and cutting
blade
F Pneumatic cutting cylinder
efficiency cutting
F The operator puts down the sack on
the grate and closes the duty door.
F The blade performs a cut on the
bottom of the bag.
F Shaking of the sack without effort
and without heavy lifting of the sack. The
FFlowing of the material into the
hopper.
F Integrated dust collector
F The cutting
Advantages
I
29
Rate:
Capacity:
Manufacturing
the rate of opening.
I
I
/automatic-sack-opening-systems
AVAILABLE
CUSTOM
MADE
Automatic bag dump station
Patented system
Ergotip

SAS®
30
F Internal mobile parts F Screw compactor for the F Ejection
the compactor
Advantages
F External gearing
I
-
pactor
I
Sack lifter
31
Rate:
Capacity:
Manufacturing
-
Rotative cleaning
nozzles/heads - Clean
In Place (CIP)
Options
See all our options
on pages 18-19
I
/automatic-sack-opening-systems
AVAILABLE
CUSTOM
MADE
Patented system
to the compactor
SAS

SAS®
32 33
I
/automatic-sack-opening-systems/sas
Patented system
SAS

Minislit®
F The belt conveyor trans-
ports the bag directly to the
band-saw cutting system
F Screw compactor for F External gearing
Advantages
F Vacuum sack lifter and
belt conveyor
I
-
I
lined...
compactor
-
-
35
Rate:
Capacity:
Manufacturing
-
-
34
I
Tilting blade system F
minute
Sugar
Tea
Soya flour
Cement
Starch
Aluminium oxide
I
/automatic-sack-opening-systems/minislit
AVAILABLE
CUSTOM
MADE
Patented system
triggered
compactor
Minislit

Minislit®
I
I
I I
36 37
Vibrating spout Dust collector Inclined conveyor to feed the Vacuum lifter for sacks for
-
ment of the production
Integrated lump breaker
F Application in the paint industry F Application in the food industry F Facility for seeds
/automatic-sack-opening-systems/minislit
Patented system
Minislit

Rotaslit®
F Cutting system with rota-
ting drum
F Opening over the compac-
ting screw
F Vacuum lifter to handle
effortlessly sacks for an ergo-
Advantages
F Screw compactor to
I
-
-
-
I
lined...
39
drum.
into the machine
Cutting area
38
Sugar
Tea
Soya flour
Cement
Starch
Aluminium oxide
I
/automatic-sack-opening-systems/rotaslit
AVAILABLE
CUSTOM
MADE
Patented system
Rate:
Capacity:
Manufacturing
Rotaslit

Rotaslit®
I I
I
40 41
Dust collector
Roller conveyor to feed the
machine
Belt conveyor,
the machine
Vacuum sack lifter for an Support raiser for the machine
the machine
Pre-crushing of the bags Steel - Stainless steel
manufacturing
handled
Vibrating chute
I
-
I
F Feeding of the machine with a
vacuum sack lifter
F Rotating bladesF ATEX version
/automatic-sack-opening-systems/rotaslit
Patented system
Rotaslit

Automatic sack opening system
t
Varislit®
42
F Automatic cutting of the sacks for a F Screw compactor -
the outlet of the compactor
F Inside view
Advantages
F External gearing
I I
-
43
-
-
Cutting area
I
Sugar
Tea
Soya flour
Cement
Starch
Aluminium oxide
F Monitoring touch screen
PalTouch® technology
F Sacks are cut on 3 sides for a total
opening and an integral emptying
F Handling is made easier for the
of the machine
hatch
machine
/automatic-sack-opening-systems/varislit
AVAILABLE
CUSTOM
MADE
Patented system
Rate:
Capacity:
Manufacturing
Varislit

Varislit®
II
I I
4544
Hopper to add additives: pre- Extended bodyPre-crushing of the bags
Steel - Stainless steel
manufacturing
handled
Holding roller
Vibrating chute
Stainless steel static chute for Sack infeed conveyor
F ATEX zone 21 implementationF Milk powder process F Deconditioning of cement with pneu-
matic conveying
F Reactor feeding through a siflter
/automatic-sack-opening-systems/varislit
Patented system
Varislit

Autotip®
F Rotative drum F Cutting system - F Vibrating chute
Advantages
F Types of sacks handled
paper and polyethylene
I
-
47
-
46
I
-
-
-
-
control panel.
I
1 3 42
Cutting machine
Tilting of the full pallet directly into
the machine
/automatic-sack-opening-systems/autotip
AVAILABLE
CUSTOM
MADE
Patented system
Rate:
Capacity:
Manufacturing:
Autotip

Autotip®
II
I
49
48
Sacks conveyor - Empty sack compactor for a Automatic unstacker for a Vibrating chute
I
I
F Sack opening line at a polyethylene
manufacturer
F Plastic injection plant F Feeding of the plant by extrusionpressure blower
fibc unloading station infeed conveyors
rotary valve speed set box
pallets of sacks
pallets tipping section sacks opening section
rotary valve speed set box
powder conveying piping
dedusting unit
buffer hopper rotary valve
truck loading spout
/automatic-sack-opening-systems/autotip
Patented system
Autotip

Advantages
Bagging machine
Rate:
Capacity:
Objective:
50
F Retention minimized F Compactness and cleana-
bility of the system
F The clamping ring
Advantages
F Flexibility of the type of
sack
I
1.
2.
3.
4.
5.
I
Rate:
Manufacturing:
Weighing accuracy:
Dedusting rate:
Inflating seal:
51
I
www.palamaticprocess.com/powder-machine
/sack-solutions/automatic-bagging-machine
AVAILABLE
CUSTOM
MADE
BaggingSystems

I
I
I
53
I
Weighing tray
conditioning
Conditioning unit at the output of an
Custom made conveyor for
bags evacuation
Automatic or manual sack
sewer
Sack welder to
52
www.palamaticprocess.com/powder-machine
/sack-solutions/automatic-bagging-machine
Bagging machine
BaggingSystems

contact@palamatic.fr
FILLING SOLUTIONS FOR BIG BAG AND OCTABIN
To fill
EMPTYING SOLUTIONS FOR BIG BAG AND OCTABIN
SACK SOLUTIONS
To empty, compact, handle, fill
CARDBOARD AND DRUM SOLUTIONS
To fill, condition, empty
PNEUMATIC TRANSFER EQUIPMENT
MECHANICAL TRANSFER EQUIPMENT
CRUMBLING AND GRINDING EQUIPMENT
SIFTING EQUIPMENT
CONTAINERS AND STORAGE SOLUTIONS
To fill, charge, empty, contain
DOSING EQUIPMENT
To control, regulate, empty, extract
MIXING EQUIPMENT
FLOW AND CONNECTION
INDUSTRIAL DUST COLLECTING EQUIPMENT

Sack handling solutions palamatic process

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (11)

Similar to Sack handling solutions palamatic process

Similar to Sack handling solutions palamatic process (20)

Recently uploaded

Recently uploaded (20)

Sack handling solutions palamatic process