1. Norman Lindsey
23211 Kimberly Glen Land., Spring, Texas 77373
832-458-2368 (Home), 281-673-5522 (Cell)
normanlindsey55@yahoo.com
Objective
Field Service Engineer
Career Summary
Successfully worked as a Field Service Engineer in Mexico and the U.S. and as a Senior Electronic Technician
with direct experience in oil and gas, semiconductor, and switchgear industries.
Education
B.S. in Computer Science, Dallas Baptist University, GPA 3.5/4.0
AAS in Electronics Technology, United Electronics Institute, GPA 4.0/4.0
AAS in Electronics Engineering Technology, Wake Tech Institute, GPA 3.98/4.0
Sponsored by Siemens Apprenticeship Program in Industrial Electronics
Professional History
Weatherford (10/2016)
Engineering Technologist I
Performed testing, calibration and repair of well logging tools including neutron tools.
Inductoheat, Inc. (07/2014-03/2016)
Field Service Engineer
Worked independently at remote locations to perform installations and service of approximately $5,300,000
worth of induction heating equipment in the US and Mexico. Responsibilities included resolving technical
issues, reporting, assisting certifications, predictive/preventative maintenance, commissioning.
Tam International (Temporary Position) 11/2013-07/2014
Electronic Engineering Technician
Built, calibrated, and tested proto circuits for down hole tool projects involving motor controllers and
instrumentation techniques using temperature sensors and flow meter. Worked with Engineers to develop
advanced down hole motor drivers and timers used in pumping fluids at 150c.
G.E. Oil and Gas (04-2011-11/2013)
Technical Advisor 7
Performed calibration, troubleshooting and repair of MWD Sondex tools. Shipped approximately $108,000
worth of tools per day. Performed continuous EHS and MWD training. EHS Safety Investigation Team
member.
Detcon (10/2009-04/2011)
Calibration Technician
Performed testing and calibration of Intelligent Transmitters used in detection of
flammable and toxic gases along with controllers used to Monitor multiple transmitters. Performed down
loading and Communications test utilizing CCS Load, Silicon Labs and Modbus through the P.C.
2. Omron (09/2008-10/2009)
Q.C. Inspector/Tester
Responsible for final inspection, testing and troubleshooting of generator line ups, rectifiers, VFD’s, SCR’s
GFDs, PLC’s, MMC’s, HMI’s and Modbus control systems. Approved approximately $2,000,000 worth of
switchgear per month.
Flextronics (06/2003-09/2008)
Component Specialist
Compiled Information such as data sheets, diagrams, drawings and part numbers to validate electronic and
mechanical components. Utilized MS word and Excel through the internet to approve parts for purchasing.
AMD, (Temporary Assignment) (08/2002-06/2003)
Wafer Technician
Process silicon wafers
Flextronics, (06/1998-08/2002)
Electronic Technician
Performed functional and ICT, troubleshooting and repair of Cisco server boards.
Participated as a team member in shipping approximately $1,000,000 boards daily.
Siemens (04/1991-06/1998)
Quality Test Technician
Performed testing, calibrating, repair and approval of electrical switchgear. Successfully completed Siemens
Apprenticeship Program to utilize my skills in troubleshooting and repairing 3 phase electrical systems.
Performed testing of MCC’s, PLC’s and a variety of Relay Logic circuits and Motor Controller Systems.
Dynamite Noble Silicon (08/1985-04/1991)
Support Technician
Performed PM, troubleshooting, repair and calibration of Industrial Production Equipment used in the
process and manufacture of Silicon Wafers which includes the following: VFD’s, PLC’s, Ladder Logic
Circuits, Process Control, and x-ray machines.
Awards and Training
Microsoft Office
SAP
IPC Solder and ISO Certified
Member of GE EHS investigation team
Siemens Apprenticeship Program including PLC’s and Industrial Control
Certified on Silicon Valley Wafer Scrubber
Lumonics Wafer Scribe Laser calibration and repair certification
Flextronics Five Year Service Award
Omron Certificate of Safety
Omron Forklift Safety Certificate
Successfully completed GE Logging courses; Geology, Resistivity, OM, Induction Tools
Successfully completed GE Security Awareness Training for foreign travel
Successfully completed Training Courses at Induct heat for Safety, and Training Classes for SP5/SP7, SP11,
SP18 and Flux Manager
Successfully completed AT American Trainco on Arc Flash Electrical Safety NFPA 70E