About the journey that was had when creating a gear box as a project and thinking outside the box for its uses.

1. Nikita Kulkarni
9983155
Lithika
Ranepura
100664914
Fariha Kabir
101045934
Noor Kahn
100579694
CREATIVITY
JOURNEY
GEAR HEADS

2. Nikita Kulkarni:
- Mechatronics and Robotics Engineer
Noor Khan:
- Product Design Engineer
Fariha Kabir:
- Mechanical Engineer
Lithika Ranepura
- Mechanical Engineer
INTRODUCTIONS

3.  Brainstorming
 SCAMPER – Substitute, Combine, Adapt, Modify, Put to
another use, Eliminate, Rearrange/Reverse
 435 Method
 Decided on smaller is better.
CREATIVITY TOOLS

4.  Gearbox must pull 10kg up a ramp
 Gearbox must lock motor into place
 Pinion is attached to the motor….. Use it
 Need to increase torque
 Need to identify the gears and pinions needed
 Shaft must rotate
WHAT WE FOUND WE NEEDED

5. GEAR BOX DESIGNS

6. CALCULATIONS

7. FIRST TEST DESIGN

8.  This could be used to gather water from streams – Could
power the pulley system
 Could be used as a Winch system to pull something up or put
something down
 Used to build a pyramid
 Used as crane
 Used in wind Turbine
 Water turbine – Hydraulic Power
ANOTHER USE

9. THANK YOU!