1. NASIR MAHMOOD
Experiences: More than 9 year’s of professional working experience in Construction and maintenance of
OIL&GAS, Petrochemical and GAS plants as a Draughtsman (Piping & Mechanical
Equipments), Familiarization & understanding of Saudi aramco Engineering
Standard & Procedures for Piping Drawings/ instrumentation systems awareness &
Understanding of industry code Practices.
Adgas DAS ISLAND: Draughtsman Piping/Mechanical
15-SEP 2015 to Till date
Client: ABU DHABI GAS (LNG & OAG)
Company: Qatar Engineering and Construction Company LLC.
Responsibilities:
 working in Piping Isometric for MTO for TA.
 Preparation of IFC drawings from MTO drawings to Pre-Fabrication according to adgas standard and
procedures.
 According to site requirement preparation of Mechanical drawings, layout, site sketches,shutdown
village layouts, structural/supports, equipments and as well 3D drawings.
 Assist for Inch Dia Entry & Tabulation
 Plot SOW in layout.
 Co-ordinate work shop during Pre-fabrication.
 Assist Schedulers / QC during TA.
 Update As-built drawings according to site changes and submission to client.
SHAH GAS DEVELOPMENT: Draughtsman Piping/Mechanical
06-AUG 2012 to 03 MAR 2013
Client: SAIPEM
Company: Descon Engineering Ltd.
Responsibilities:
 worked in SPOOLGEN Pre-Fabrication Department in saipem site office SHAH GAS
DEVELOPMENT ABU DHABI
IGD-5 Process Plant Abu dhabi Draughtsman Piping/Mechanical
06-Nov 2011 to 12 JUL 2012
Client: GASCO
Company: Descon Engineering Ltd.
Responsibilities:
 I completed assignment of Underground GRE/GRV Piping Drawings. Shop drawings for spools,
Joint Marking, joints details, Cut lists with bill of material According to GASCO standard and
Procedures.
 Prepared of Piping spool details drawings in Gasco standards for site installation of METALIC and
GRE Piping drawings above ground.
 Preparation of revised spool drawings according to given material from client.
 Prepared the MTO’s for structural and piping support drawings which received from client.
 To prepare the spooling of piping with SpoolGen according to client’s given spooling procedures on
Mobile: +971-50-3683732
E-mail: mahmood_art2003@yahoo.com
sahibzada_2@yahoo.com

2. IDF files from client.
 Working on Piping Revise drawings according to overall daily welding/progress report Shop and
Field Joints and co-ordination with QA/QC department.
 Excellent experience to prepare 3D Model drawings according to site requirement JGC Approved
and Excellent performance of preparation of MOD:SD/001/024/09:REPLACEMENT of 7-E-107
3D Model drawing of replacement of sulphur condenser for ADGAS-TA-2011 Presentation.
 Ability to Design section drawings of piping or general arrangement layout drawings of Mechanical,
structure 2D and 3D as per requirement.
 Well known to work on VENDOR manual drawings of Piping As-built and AMERON manual
drawings according to client procedure.
ADGAS OFFSHORE OAG-1 Draughtsman (Piping/Mechanical)
05-Apr-09 to 06-Aug-10
Client: ABU DHABI GAS
Company: Technip / Descon Engineering Ltd.
Responsibilities:
 Updating the QA/QC records in TAKEOVERxp handover department MEPI Technip. Scan the
QA/QC Records and update in TAKEOVERxp.
 Ensure documents issuance to Company and sub contractor. File PCC Documentation to proper level.
 Upload punch list in TOxp Update Master punch list in TOxp File punch list Receive the QA/QC
Forms of each department.
 Check / update the system numbers and update in PCC OR Construction database as
required. Type on excel the Punch list. Update the progress in TOxp (Date of complition
QA/QC Records).
 Update the progress in TOxp (Date of complition punch list Records). Generate Check List
Systems status in all disciplines.
LCWU Jhang Campus Instructor Industrial Design (BCID/BFA Hons) ART Department,
17-Sep 07 to 31-Mar 09
Client: Lahore College for Women University
Campus: JHANG CAMPUS www.lcwu.edu.pk
Responsibilities:
 Classroom Lectures regarding Concept of drafting and designing.
 Manual drafting and different jobs to supported to art.
 Working in parabolic, hy parabola, cone, hexagonal, development, human eye view. Bird eye view as
well as working in first angles, second angle and third angles views.
 Rendering of different type of 3D modeling jobs in Auto CAD Files.
 Excellent communication skill and coordination with students to focus on design models and good
command on adobe foto shop computer lab.
 Introduction to drafting standard sheet setting and design of models.
Al-marai Draftsman (Piping Mechanical)
03-May-07 to 03-Sep-07
Al-Kherj KSA
Client: Al-marai (Saudi diary Processing Plant CPP2).
Contractor: Al-akhdood Construction Company
Company: APV British based company
Responsibilities:
 As-built ISO GLYCOL CLADED Return and Flow Pipe lines for fans, cassettes and AHU’s
isometric Drawings with material take off.
 Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic

3. hadeed standard and procedures.
 As-built drawings of 6F08 & AHU50 CASSETTES AHU ISO-15 NB, AHU-ISO-20 NB
AHU-ISO-25 NB, -ISO-40 NB & AHU-ISO-50 NB. Area - 4.1 to Area – 4.5 and Area – 4.7
& Area 4GC7. Submitted drawings according to al-marai standard and Procedure.
N.C.C Draftsman (Piping Mechanical)
14-Jun-05 to 03-Nov-06
Al-Jubail KSA
Client: HADEED (Saudi Iron and steel company).
Contractor: National Contracting Company
Project: SVA N.C.C
Company: National Contacting Company
Responsibilities:
 As-built drawings of Piping and steel structure of Furnas area (Natural Gas, Combustion air,
Compressed Air, Burners, Nitrogen and Hydraulic Pipelines) drawings.
 Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic
hadeed standard and procedures.
 As-built drawings of water- Station, Pump house, Cooling water station hydraulic- Room and
& sketches of overhead & boom cranes.
 Different type of site layouts of SVA Piping isometrics Drawings in Saudi iron and steel
company hadeed.
Feb- 05 to Jun-05 Draftsman Piping/Mechanical
IWS (Inspection work Sheet)
Client: Saudi Aramco (Riyadh Oil Refinery)
Project: Area A, B & D
Company: Saudi Aramco Engineering Division
Responsibilities:
 Appointed as a Piping design draughtsman. Working on IWS (Inspection work sheet)
maintenance and Fabrication of Piping in Riyadh Refinery in manual Drawings with material
take off in Riyadh oil Refinery.
 Preparation of Piping Manual As-built drawings and Piping detail drawing, Knowledge of
creat ISOMETRIC bill of material for above mentioned areas according to Saudi aramco
Applicable Standard- and Specifications.
 Preparation of ISOMERIC Piping Detail drawings marking with spool wise and joint
marking shop and field including different type of Pipe supports with Bill of material.
 Update P&ID according to change of isometric drawings or replacement of line. Upgrade the
drawings to change locations of fire equipments locations.
 Involvement in site to Installation of piping and fitting of flanges, elbows and related pipe
supports Large bore and small bore.
G.I.C Draftsman (Electrical/Mechanical)
09-Dec-04 to 31-Jan-05
Riyadh Industrial Estate KSA
Client: Sabic TSL (Techanical Services Laboratory).
Contractor: Gulf Industrial Complex
Project: Electrical
Company: Sabic R & D
Responsibilities:
 Appointed as a CAD draughtsman Electro/Mechanical, Electrical lighting layout, Panel

4. layout, Power layout, Cable tray layouts in Auto CAD drawings according to sabic standard
and procedures.
 As-built drawings of Single Line Diagram layout, Panel Descriptions with electrical Legends
 As-built Drawings submitted to sabic R&D Riyadh Industrial Estate according to Saudi
sabic standards.
Jul- 04 to Oct-04 Draftsman Piping/Mechanical
Piping As-built Red Line standard Job No.268 & 269
Client: Saudi Aramco (Uthmaniyah Gas Plant)
Project: Upgrade Fire and Utility Water System
Company: Petcon / FAFCO
Responsibilities:
 Appointed as a Piping design draughtsman. Project Upgrade Fire and Utility water system
underground and above ground at UTHMANIYAH Gas Plant udaliyah.
 As-built RED LINE isometric & piping plan manual Drawings. Preparation of drawings with
material takes off. DELUGE VALVE Drawings comply with Saudi aramco’s IFC Drawings
Applicable Standard- and Specifications.
 Existing Fire water and Utility water piping to be I.C.L. (Internal cemented lines) at
UTHMANIYAH gas plant.
 The areas where my work involvement are CHILLDOWN, Area 24-03, 24-04.Product Surge
& Refrigerant Make- Up (RMU) area 25-07, Utility area and SULFUR Area.
 To Arrangement Fire Protection equipments (HR Hose Reel, PIV Post -Indicator Valve, FH
Fire Hydrant, FM Fire Monitor Piping & generation of isometric with respect to requirements
in plant.
 Preparation of Piping SKID DETAILS, vertical CHLORINE STORAGE TANK (1.210m cap:
400 usg) Preparation of Piping Details Drawings in auto CAD. 3”, 4”, 6”, 8”, 10”, 12” & 20”
inches Diameters Pipe- Lines in-situ fabricated and installed above mentioned Areas
according to Saudi aramco’s standards and Specifications.
Jan- 03 to Apr-04 Draftsman Mechanical
Errection / Fabrication
Client: Al-rehmat Traders Textile Processing Unit
Project: Jarranwala Road, Khurrianwal, Faisalabad Pakistan.
Company: Al-rehmat traders
Responsibilities:
 Errection & Foundation experience of Thermosole (Morrison), fully automatic Tensionless
calendar (changzhou), Drying range (Morrison), Tensionless Dryer (jiangzou), Bleaching
Range, Mercerizing, Pressure jiggers, Sanforizing (don fang) machines.
 During Errection of above mentioned machines I Prepared civil foundation drawings and
Draw complete Layouts machines.
 Installation drawings of machines and complete plan drawings according to requirements of
client in Auto CAD 2000.
 I performed as record keeper responsibilities to update Data and drawings of mechanical and
civil discipline.
 Preparation of Utility Drawings of Piping Plan and Isometric drawings like Steam, Pure
water, Gas and caustic.
 I also design piping isometric drawings of power house on same project.

5. Qualification/ Certifications:
1999 - 2002
Draftsman (Mechanical) Government Techanical Training Institute, Jhang sadar.
Apr, 2001 Authorized Autodesk Training Center (ESTC)
Auto CAD 2000 Engineering Systems Training Center, Lahore.
Jul, 2001 Edge Systems International
Edge Foundation Computer Course Lahore office.
Apr, 2004 Bentley Training Center (ESTC)
Auto Plant 3.0 3D (Piping, Equipment & Isometric) Engineering Systems Training Center, Lahore.
International Cods & Standards:
Well familiar with
 ANSI Pressure Piping codes B31.1.0
 AWS, ASTM Codes and Standards.
 Saudi Aramco Engineering Standards about PIPING/Welding.
 Piping isometric study/Piping & instrument diagram.
 Piping plan layout (PPL) as well as (UTI), (FPS), (FDN), (HYD) and P&ID.
 Sabic design procedure for piping and industry code and practices.
Computer Skill:
 Microsoft Office Word, Excel Edge Systems International Lahore.
 AutoCAD2000 Engineering Systems Lahore office.
 Auto Plant Engineering Systems Lahore office.
 Smart Plant Intergraph Spoolgen
Personal Information:
DOB: 05-Feb 1974
C.N.I.C: 33202-1432439-7
Passport No: HC 0154392
Date of Expiry: 08-Sep-2017
Permanent Address: Malik House, Lane Opposite Faisal Mills Green Town Toba Road Jhang Sadar P.O Box
No.35200, Pakistan.
Hobbies and Interest:
 Explore International affairs & Reading Newspapers