1. MICHAEL L. FISHER
Form N° L5-FMT-075 Rev. (2)
CV Rev. 03 dated 16-Jun-2015 Page 1 of 6
CURRICULUM VITAE
NAME Michael L. Fisher
DISCIPLINE Mechanical / Technical
LOCATION Oklahoma (USA)
QUALIFICATIONS
Level II for MT, PT, UT
Level II RT Film Interpretation
AWS Certified Welding Inspector
Certified by 6-G in SMAW, GMAW, GTAW; 3-G in FCAW
Certified in SAW
Proficient in Microsoft Office (Word, Excel, Outlook)
COURSES
Completed AWS seminar and test for CWI
Completed 16 hr course in ISO 9001-2008 for Internal
Audits
Federal Hocking High School
Two years vocational education in carpentry
LANGUAGES English
2. MICHAEL L. FISHER
Form N° L5-FMT-075 Rev. (2)
CV Rev. 03 dated 16-Jun-2015 Page 2 of 6
PROFILE
Jun 2014 – Present
Holden Inspection Technical Services - H.I.T.S.
Independent Contractor
Third-party inspections including witnessing and monitoring production of various
commodities, reviewing data, and witnessing of mechanical testing performed for various
customers
Perform inspection activities on-site and at vendor facilities during manufacture, fabrication,
installation, hydrostatic pressure, and operational testing
Vendor inspection to client specifications such as dimensions, witness FAT Testing
Perform inspection of blasting and coating of product to client specifications
Detailed reporting to client and supervisor on visits to suppliers
Jul 2014 – Present
Velosi America LLC
Independent Contractor
Third-party inspections including witnessing and monitoring production of various
commodities, reviewing data, and witnessing of mechanical testing performed for various
customers
Perform inspection activities on-site and at vendor facilities during manufacture, fabrication,
installation, hydrostatic pressure, and operational testing
Witness assembly and testing of wellhead valves to supplier drawings/procedures and client
specifications
Apr 2014 – Present
RPM Inspections (Tulsa, OK)
Independent Contractor: Technical Specialist
Vendor inspection to client specifications such as dimensions, witness FAT Testing, witness
hydrostatic testing
Detailed reporting to client and supervisor on visits to suppliers
Review all documentation per PO requirements
Apr 2014 – Present
Intertek Technical Services (Houston, TX)
Independent Contractor: Technical Specialist
Vendor inspection to client specifications such as dimensions, witness FAT Testing, witness
hydrostatic testing
3. MICHAEL L. FISHER
Form N° L5-FMT-075 Rev. (2)
CV Rev. 03 dated 16-Jun-2015 Page 3 of 6
Detailed reporting to client and supervisor on visits to suppliers
Review all documentation per PO requirements
Witness assembly and hydrostatic testing of downhole valves per supplier drawings and
customer specifications.
Jun 2014 – Present
DNV-GL Inspection Services (Houston, TX)
Independent Contractor: Technical Specialist
Vendor inspection to client specifications such as dimensions, witness FAT Testing, witness
hydrostatic testing
Detailed reporting to client and supervisor on visits to suppliers
Review all documentation per PO requirements
Witness assembly and testing of wellhead valves to supplier drawings/procedures and client
specifications
Aug 2014 – Present
SGS North America Technical Services (Bartlesville, OK)
Independent Contractor: Technical Specialist
Vendor inspection to client specifications such as dimensions, witness FAT Testing, witness
hydrostatic testing
Detailed reporting to client and supervisor on visits to suppliers
Review all documentation per PO requirements
Feb 2002 – Apr 2014
T.D. Williams, Inc. (Tulsa, OK)
Nov 2008-Apr 2014: Senior Inspector
Responsible for moving parts through X-ray. Reading film and performing other NDT as
needed.
Working in Receiving-Inspection to move parts into stock as they pass inspection
Building customer data packets as required to ship parts on sales orders
Responsible for keeping all measurement equipment and furnaces calibrated. (ie: calipers,
plug gages, thread gages, ID and OD mics, etc.)
Have a varied background of several codes that apply to different types of equipment
inspected
Feb 2002-Nov 2008: Combination Welder
Fit-up and weld a wide variety of component parts used to build pipeline equipment such as
control bars, adapters, housings, L-O-R with guide bars
Helped set up and operate the closure cell
4. MICHAEL L. FISHER
Form N° L5-FMT-075 Rev. (2)
CV Rev. 03 dated 16-Jun-2015 Page 4 of 6
Feb 2001 – Aug 2002
Hanover Company (Broken Arrow, OK)
Fitter/Welder
Lay-out, fit and weld fittings and attachments in compressor bottles and scrubbers
Fit and weld pipe spool in and out of position to 100% x-ray
Jul 2000 – Feb 2001
Heat Treat Transfer Equipment Co. (Tulsa, OK)
Fitter/Welder
Lay-out, fit and weld fittings and attachments in shell and tube heat exchangers
Weld tubes to tube sheets and dye-check
1991 – Jul 2000
Energy Exchanger Company (Tulsa, OK)
1994-Jul 2000: Quality Control
Responsible for documenting heat numbers, weld stamps, and grade of material
Pull all final dimensions before releasing for hydro or heat treat
Qualified to level II SNT-TC-1A in RT, PT, and MT using prod and A/C–D/C yoke method
and documentation
Visible PT and film interpretation
1991-1994: Fitter/Welder
All types of layouts
Burning, fitting and welding on shell and tube heat exchangers
Welded with Inconel, Monel, stainless, aluminum, chrome and carbon
Stringer beaded head seams and saddle on type connections
Sub-arced all parts of unit including round seams, long seams, nozzle pipe to flange, etc
Hand welded insertions into shell using SMAW process
Welded tubes to tube sheet using GTAW process
Note: During four year period while employed at Energy Exchanger Company (1996-
2000), worked two part-time jobs as listed:
Jan 1999 – May 2000
Safeco, Inc. (Broken Arrow, OK)
Part-time Fitter-Welder
All types of layouts
5. MICHAEL L. FISHER
Form N° L5-FMT-075 Rev. (2)
CV Rev. 03 dated 16-Jun-2015 Page 5 of 6
Burning, fitting and welding of low pressure gas filters
Jun 1996 – Jan 1999
Zeeco, Inc. (Broken Arrow, OK)
Part-time Fitter/Welder
All types of layouts
Burning, fitting and welding of burners, incinerators and various other types of combustion
equipment
1988 – 1991
Maloney-Crawford Company (Tulsa, OK)
1990-1991: Production Supervisor
Responsible for scheduling work to meet shipping dates
Order consumables
Ensure everything moves along in the shop smoothly
Hire and terminate employees
Day-to-day work plan
1988-1990: Fitter/Welder
All types of layouts, burning and fitting from individual vessels to entire skid units, including
butt weld and socket weld piping
Sub-arc welded longitudinal and circumferential seams to X-ray quality
Stick and flux core welded fittings in vessels to ultrasonic quality
Quality Control: 1988-1990
Checked layouts and fit-ups for all units
Recorded heat numbers, weld stamps and grade of material
Performed and documented Brinell hardness tests
1982 – 1987
T.H. Russell Company (Tulsa, OK)
1982-1987: Welder
Stringer beaded head seams prior to sub-arc welding
Sub-arc welded longitudinal and circumferential seams to X-ray quality
Stick and flux-core welded fittings in vessels to ultrasonic quality
1982: Helper
Performed basic grinding and cleaning jobs
Performed hydrostatic testing on completed vessel units