Mark Moak is seeking employment as a maintenance supervisor with experience maintaining oil rig equipment over the past 30 years. His experience includes supervising maintenance and inspections of equipment such as drawworks, mud pumps, top drives, blocks, and accumulators. He has worked offshore for Paragon Offshore in Cameroon and for Helmerich & Payne Drilling, where he supervised overhauls, replacements, and repairs of engines, pumps, electrical systems, and other rig machinery and helped rigs address maintenance issues.

1. 6197 River Rd South
Summit, MS 39666
markmoak@bellsouth.net
(601) 600-0269 Cell
Mark T Moak
Objective
Experience
Seeking gainful employment and be an asset to your company.
Oct 2014 to March 28, 2016- Paragon Offshore Shore base Douala
Cameroon West Africa Division. Worked a 35/35 rotation
Maintenance Supervisor
 Responsible for upkeep and maintenance on 5 Jackup Rigs and all
equipment.
 Work with Rig Superintendents with inspections, equipment COC’s, rig
problems, downtime, etc.
 SAP- Tracking and making sure maintenance is being done on each rig.
 Make rig visits checking equipment and rig is up to ABS standards.
 Participate in HSE and HSE audits
 Help with yearly budgets.
 Make sure rig maintenance crews have proper training on rig equipment,
 Work with vendors on equipment inspections, upgrades, obsolete parts
and replacement parts.
May 2005 to Oct 2014- Helmerich & Payne Drilling worked a 14/14
rotation
Maintenance Supervisor
 Responsible for upkeep and maintenance on Rig and all equipment.
 RAMS (Rig Asset Management System). Computer Base Maintenance
Program. Teach new users how to use the program, close out work
orders and create new work orders. We do weekly call-ins to share
learning with the Electricians and Mechanics throughout H&P.
 I plan and over see yearly inspections with Third party workers.
 Keep up with M&S (Monthly Spending) and stay within the monthly
budget.
 Order parts and supplies for Drilling Rig.
 HSE (Health, Safety and Environment) H&P and Shell Training. 9002
through H&P and 14001 through Shell. Safety is first with H&P and Shell
and I strongly promote this among employees. We have weekly HSE call-
ins with H&P.
 I perform walk-around with MMS, Coast Guard and repair findings. Have
knowledge of class 1, class 2 and non classified areas. Have T2 training
through Shell.
 Involved in the tech support group when we have our weekly fire and
abandon drill.

2. 1985–2005- Helmerich & Payne Drilling
Electrical Tech
 Responsible for upkeep and maintenance on all Electrical equipment.
 Varco – Top drive, PHM, PLS, PDM and conveyor.
 Ross Hill SCR system.
 GE 752 and EMD DC motors, Lighting, etc.
 Some PLC experience. Siemans, PLC Direct Logic and GE Series one.
 General Monitor gas detectors throughout the Rig.
1981–1985 Armstrong Rubber Co. Natchez, Ms
Electrician
 Plant Electrical maintenance and upkeep
 Tire building equipment, lighting, ECT.
Some PLC experience-Gould
1980–1981 Westgate Port Allen, La
Electrician
 General Electrical maintenance and new construction in Dow Chemical
Plant
Education Numerous certifications from training provided by H&P and Shell
provided upon request.
1978–1980 Southwest Mississippi Junior College Summit, Ms
 Graduated Industrial Electricity and Electronic
 Graduated McComb High School, McComb, Ms
.
Interests Shopping, Traveling, And Camping.

3. Mark Moak Maintenance Supervisor Land Base
With Paragon Offshore West Africa Cameroon
Supervise and assist RPG with the overhaul, crank shaft change out, and block repair of an
EMD645-12 diesel engine.
Supervise and assist Rigs with yearly inspections on Drawworks National 1320UE, Emsco C3.
Baylor brake 7838. Mud Pumps National 12-P-160, Top Drive Varco TDS4S, TDS5, IDS. Jacking
System National and Letourneau.
Put together a new T3 13 5/8 Annular, replaced the failed regulator that aloud completion fluid to
enter the T3 Accumulator tank, cleaned the tank, and replaced the fluid.
Supervised and assist the rig down or a TDS5 for Inspection, Replaced the Quill shaft and swivel
then reinstalled in derrick.
Supervise and assist in a 5 year Crown National 660FA and Traveling Block, replaced bearings
and gauged sheaves.
Supervise and assist the Bud Smith crew with 8 National gear box overhauls.
Supervise and assist ESI with the Letourneau jacking system inspection and repair.
Talked one rig through a problem that was blowing the fuse in the Top Drive PLC, had them
check for a short and it wound up being a bad coil.
Talked one rig through a problem with a mud pump surging, Told them to check the oil in the
pump and they found out it was full of drilling mud. Went out to rig to assist in cleaning and
inspecting the pump.
With Helmerich & Payne Drilling / Maintenance Supervisor Offshore
Supervise all annual, 3 year and 5 year OEM inspections, Drawwork, Mud Pumps, Top Drive,
Block, Crown and Accumulator
Walk with Coast Guard and MMS/BOEMER as they inspect the Rig. Correct any problems they
find.
Supervise and assist Stewart & Stevenson with EMD645-16 Overhaul and crank shaft change
out.
Supervisor and assist with an accumulator change out, replaced all hard lines and hoses.
Supervisor and assist Stewart & Stevenson with 3 EMD645-16 Emission upgrades.
Supervise and assist NOV with bearing change out in a Gardner Denver PZ11 Triplex Pump.
Supervise and assist Gardner Denver PZ11 Eccentric change out.
Supervisor and assist with EMD control panel upgrades.
Varco PHE-3 Automated pipe handling equipment, have replaced bad wiring, bad sensors, bad
hydraulic valves, AC drives and motors, bad bearings, changed bad HYD cylinders, change bad
PLC cards, have rigged it up and down.
Supervise and assist with the SCR Air condition change out.
Supervised and assist in the rig up and down of a TDS-4S Varco Top Drive, have wired up and
trouble shoot problems, replaced bad service loops, replaced bad PLC cards.
Have replaced brush holders and brushes in EMD 79’s and GE 752’s DC motors.
Have rigged up the electrical on a platform type drilling rigs.
Have worked on 2 new builds 1 offshore platform rig and one land rig doing electrical work.
Have worked on Ross Hill generator and SCR system. Have replaced DC and AC modules, DC
contactors, SCR pucks, exciter cards.