2. 2
Henderson Hall
Campus Sketches
For this assignment we were instructed to find various building on campus and sketch them.
In these sketches we had to illustrate and emphasis elements such as an overhead plane, point, linear
element, etc.
The sketches you see above are of Henderson Hall on campus. The top left is an example of a linear
element, the top right is an example of a point element and the bottom left id an example of a planar
element.
3. 3
Lettering Assignment
For this assignment we asked to play around with positive and negative space by putting our name in
any pattern we choose.
I chose to do a standard left to right arrangement but I alternated between positive and negative space
with each letter.
4. 4
Collage Model
For this assignment we were instructed to make a collage from papers given to us and define space.
Once we created the collage we were asked to make a study model from the collage.
For my model I decided to create a lot of open space and add numerous amounts of linear elements.
3-Space Composition
For our final assignment we had to create a model defining space using three boxes, 12x12, 16x16 and a
combination of a 12x12 and a 16x16. All boxes were measured on a ¼ of an inch scale. The materials were
5. 5
we assigned to use were foam board and chip board. Throughput the assignment we had certain
requirements to meet on our rubric. We were also instructed to mount our models on a 10x20 base.
For my model I decided to keep it simple to reflect my own personal style. Once again I left multiple
open spaces to contribute to my style.
Table of Contents
Title Page……..Page 1
Campus Sketches……..Page 2
Lettering Assignment…….Page 3