biomedical engineer resume 2021 mahmoud saber

1. (Patience and Persistence make miracles)
RESUME 2021
Biomedical Engineer
Mahmoud Saber (PMP)®
engmahmoudsr@hotmail.com
00966594218007
Reference
1. Mr. Brian Tapson(director of east cap x-ray - South Africa)
Btapson@eastcapexray.org.za
2. Eng. Hamdy Hassan ( Service Manager in PHILIPS health care - Egypt)
Hamdy.hassan@philips.com
3. Eng .Hitham saad ( Service Manager, PHILIPS health care - Egypt)
Hitham.saad@philips.com
4. Eng. Abd EL Monem AL Hababy (Biomedical Engineering dept. Manager – King Saud Medical City –
Riyadh – KSA ) Ahababi@ksmc.med.sa

2. Page
1
An Experienced, Qualified BIOMEDICAL Engineer seeks to work as Field Service Engineer / Medical Planner
Bachelor of Biomedical Engineering from El Shorouk Academy-Egypt , June 2008, good
Postgraduate Studies
Project Management Institute (PMI)® - USA
Technical courses
Training date Training Course Trainer
JUNE 2021 Distributed Chilled Water Pumping
April 2017 CONTROL & MONITORING
Mar 2017 HVAC & WATER SUPPLY
Feb 2009 VHDL Advanced course Ain Shams University
Jun 2008 Analog & Digital Electronics Cairo University
Sep 2007 Programming course Vision Academy
July 2006 Transducers & Sensors ( OEM ) Original Medical Equipment Manufacturer
Bio-medical courses
Oct 2021 Essentials of Digital Imaging
Oct 2021 Principles of Fluoroscopy
Jan 2021 Principles of CT + Advanced Cardiac CT + CT Maintenance
July 2020 PET-CT Essentials
April 2020 Magnetic Resonance Imaging
Mar 2020 Radiation Safety & Protection
Feb 2021 Health Facility Planning Course (CPD) certified
Nov 2020
1-Essential variables mechanical breath types
2-Capnography
3-Ventilation Modes
4/5-lung ventilation & ventilator concepts
Feb 2021 Ultrasound Transducers
APRIL 2020
1-CT Scanner Hardware
2-CT Maintenance
3-CT Multi-slice Basic
MAR 2020 Nuclear medicine Systems SPECT/CT
Full name Mahmoud Saber Rady
Nationality Egyptian RESIDENCY SAUDI ARABIA
Birth date 5/6/1985 VISA / Iqama Status VAILD &Transferable
Driving license (Egyptian & Saudi & international) Marital Status Married
(Member in Egyptian Syndicate of Engineers)
(Member in Saudi Council of Engineers)
(Member in Federation of Arab Engineers)
KSA +966-594218007 E-Mail
engmahmoudsr@hotmail.com
engmahmoudsr@yahoo.com
https://www.linkedin.com/in/mahmoud-saber-pmp-%C2%AE-8b9aa7a6/
May 2021 Project Management Professional (PMP)® No# .3010239

3. Page
2
Work Experience @ (Saudi Arabia) 2011-NOW
Biomedical
Consultant
MOH General Directorate of Equipment
‫لل‬ ‫ــة‬‫م‬‫ــا‬‫ع‬‫ال‬ ‫إدارة‬‫ل‬‫ا‬
‫ــ‬
‫تــــ‬
‫ــيــــــة‬‫ب‬‫ــ‬‫ط‬‫ال‬ ‫ات‬‫ز‬‫ــــيــ‬‫ه‬‫ج‬
JULY 2020-
NOW
1. Consultant biomedical engineer resposible for health care facility planning.
2. Assign the specification of the medical system.
3. Following up with the equipment process.
4. Technical evaluation for the equipment tenders.
5. Review & approve the projects drawing in accordance with the international standards
(FGI) Facility Guideline Institute.
6. Develop a medical equipment list and BOQ for hospitals and health centers in
accordance with the international standards (HFG) healthcare facility guidelines.
Biomedical
Consultant KING SAUD MEDICAL CITY
Sep 2018 –
Mar 2020
1. Quality assurance of ,CATHLAB,CT,SPECT /CT & MRI
2. Provide technical and clinical support
3. Provide post- installation, training
4. Perform first & fast response to the service calls in the
hosp.
5. Design & follow up the PPM plan
6. maintain daily communications with medical staff
prepare emergency plan and set a precaution set for the
biomedical dept. during the cov-19 pandemic.
Service
Supervisor
Feb 2017–
Sep 2018
1. Testing & Commissioning beside Maintenance
Services all kind of water pumps & UL/FM firefighting
2. Program VFD variable frequency driver
3. Maintain and repair (MDB) Main distribution board,(MCC)
motor control circuit & (ATS) Automatic transfer switch
4. manage service support to our customer 24/7 by
scheduling the required maintenance and assign it to
team
5. Do service reports , documentations

4. Page
3
o Project Management knowledge have been proved by gaining the certification from
o Healthcare Engineering planning knowledge gained by Experience, Practicing &
o In-depth knowledge of troubleshooting and servicing faulty Systems by training and experience
o Provide maintenance service both preventive and corrective as well as Calibration.
o Capable of working for long hours under difficult conditions, unsupervised, independently,
Seven days per week without limitation for travels as I still young man.
Field Service
Engineer
June 2015 –
Feb 2017
1. Installation and Maintenance for all Analog X-Ray
SHIMADZU systems RAD speed (Ceiling Suspending / Floor mounted)
2. Install and train users at CR Cassette reader & DR Digital Reader
3. Perform ultrasound application training
4. system level trouble-shooting on complex problems.
5. Install complicated systems according to the Quality Std.
Biomedical Engineer Saudi Ministry of Health
Hospitals
June2011 -
June2015
1. Repair, Maintain, PPM, Calibrate medical equipment
2. Install and commissioning equipment
3. Train Equipment’s users.
4. Wide experience in writing excellent Technical Reports,
presentations and Statistics.
5. daily English communication with health practitioner & listening
Internship
Trainee
egypt Nov2008 -
May2010
1. Perform maintenance service for the different modalities of Philips digital x-ray ,
C-Arm, X-ray system, mobile x-ray , like replacement of X-ray tubes, high tension
cables & generators
2. X-ray tube adaptation, conditioning, generator
calibration
3. Participate in RF cage & MRI systems installations
ACHEIVA 1.5T , ACHEIVA 3 Tesla & Panorama HFO 1T in
10+ sites with South African Engineers (third party
company - east cap x-ray co.)
4. I participated in Ramp up the magnetic field, field plot,
active /passive shimming & Helium filling in MRI
5. I participated in magnet deicing after Quench accident

5. Page
4

6. Page
5

7. Page
6

8. Page
7

9. Page
8

10. Page
9

11. Page
10

12. Page
11

13. Page
12

14. Page
13

15. Page
14

16. Page
15

17. Page
16

18. Page
17

19. Page
18

20. Page
19