Ahmad Eid has over 12 years of experience as a biomedical engineer. He holds a BSc in Biomedical and Systems Engineering from Cairo University. Currently he works as the Chief Consultant of Biomedical Engineering for VAMED Engineering, where he has worked since 2013. Prior to that, he spent over 10 years as a Senior Biomedical Engineer for VAMED Emirates, working on various healthcare projects in the Middle East.

1. Phone: +20 1002026389
Email: eid_2000@hotmail.com
Page 1 of 5
Ahmad Eid, BSc Eng.
Summary
 Biomedical Engineer 12 years +
 BSc of Biomedical and Systems Engineering
 6 year experience in Healthcare Projects
 7 year experience in Healthcare Information Technology
 12 year experience in medical equipment installation and repairs
Education
Faculty of Engineering, Cairo University, Egypt.
B.Sc. of Bio-Medical and Systems Engineering.
Graduation project very good grade.
Biomechanics (very good grade) and Hospital Design (good grade)
Web Developing courses at Regional IT institute RITI.
PMP Certification under process
Professional
Experience
1st July 2013 to present.
VAMED Engineering
Chief Consultant of Biomedical Engineering
VAMED Ukraine
23rd May 2010 to present.
Senior Biomedical Engineer
VAMED Emirates
Project Manager – SKMC Abu Dhabi New ED
 Hospital Design.
 Medical Equipment Planning
 Hospital IT infrastructure planning and implementation
 Specifying of medical equipment and IT infrastructure hardware and software.
 Tender Management.
 Offer Elaboration
 Preparing medical equipment packages
 Project Management
 Medical Equipment installation, integration, T&C, repair, and warranty handling

2. EXAMPLES OF PROJECTS
Sidra Medical Research Center, Qatar 2011. Sidra is a state of the art worldwide reference medical center.
I was assigned mainly for tender management and technical offer elaboration for medical equipment pack-age
according to tender technical specifications and tender terms and conditions. Ensuring that all offered
equipment and software are compatible with CERNER HCIT and connectable through HL7 protocol.
Sheikh Khalifa Medical City ED Expansion, Abu Dhabi UAE, 2011 – 2013. I was Responsible for tech-nical
Page 2 of 5
offer elaboration and project management until initial handing over in June 2013.
Rashed Abdullah Omran, RAK, UAE, 2011 – 2012. Hospital design and medical equipment planning for
200 bed Ob/Gyn and Pediatric hospital. Hospital network and IT infrastructure design. Medical equipment
and IT Hardware procurement.
Okhmatdyt Oncology and BMT center, Kiev, Ukraine. 2013 – 2014. Hospital design and medical equip-ment
and IT infrastructure planning.
Mafraq Hospital, Abu Dhabi, UAE, 2012. Tender management and technical offer elaboration.
Danat Al Emarat Hospital, AbuDabi, UAE 2012. Tender management and technical offer elaboration.
1st March 2008 to 20th May 2010.
Al Mazroui Medical & Chemical Supplies.
Medical equipment suppliers and turn-key project contractors.
Projects Manager
Hospital turn-key project Manager. Leading a team on design and build basis to establish a 200 beds ma-ternity
hospital SKMC Ajman UAE.
Sequential missions: Loaded Plan design, offer elaboration, contract awarded, submitting materials for ap-proval,
procurement after approval, submitting shop drawings, releasing orders, Installation, and handing
over.
Designed and led the implementation of entire IT infrastructure in this hospital including CERNER Millennium
deployment and ensuring medical equipment integration within the different healthcare software application
modalities.
From 1st August 2004 to 28th February 2008
Gulf Drug Est. UAE.
Senior Service Engineer
Gulf Drug Est. UAE. Sole agent for Schaerer Sterilizers (Switzerland), Fresenius Haemodialysis (Germany),
Steris AMESCO Central Sterilizers, Washer Disinfectors, OT Integration Systems (USA), Drager Ventilators
& Anesthesia (Germany), Seca Scale (France), Fresenius Vial Syringe and Infusion pumps (Germany), Mar-tin
Electro Surgical Units (Germany), Martin Light Source, Hettich Centrifuge, and many other brands.
Responsible for PPM and repairs of:
Schaerer Central Sterilizers installed at the CSC where we have one of the biggest installations in the Middle
East. 8 machines Ecostar AS-8 60x90x120 cm.
Training for Schaerer Sterilizers was attended in Switzerland and delivered by Belimed.

3. Steris AMSCO Central Sterilizers, Washer Disinfectors and Sonic Cleaners.
Fresenius Haemodialysis Machines 4008 series.
Martin Electrosurgical unit ME 200, ME MB 2, ME 114, Maxium. Argon Beamer 181 (Technical Training At-tended).
Page 3 of 5
Spacelabs Patient Monitors
Drager ventilators Evita, Oxylog, Babylog.
Drager anesthesia Fabious.
Fresenius Vial syringe and infusion pumps.
Hettich Refrigerated Centrifuges Rotina, Rotixa, and Rotoselenta.
Eppendorf Centrifuges.
Midmark Sterilizers Ultraclave M11/M9.
Hitech Touch Screens.
Supervised major installations for Turn Key Projects.
1st October 2002 to 1st May 2004
New Kasr Eleini Teaching Hospital (1000 beds).
Maintenance Bio-Medical Engineer and IT Specialist
Supervisor over ICU, CLINICS & HAEMODIALYSIS Units. Good experience in
Ventilators Bennett, Patient Monitors, Syringe & Infusion Pump, Fresenius Haemodialysis Machine and hos-pital
IT specialist.
In Detail:
 Familiar with Fresenius Haemodialysis Machine 4008 series and Gambro AK 90.
 Repairing electronic boards generally, and particularly HP and Space lab Patient Monitors. Also
Doltron, Terumo, Argus and B Braun Syringe and infusion pumps.
 1st call technical support for GE X-ray 400E, GE CT, Ziess Ophthalmic Laser, lab equipment such
as chemical analyzers, and Phillips MRI.
 I was responsible for doing regular checks, calibrations, verifications, and PPM for all equipment un-der
my supervision.
 Coordinating with all companies and agencies and estimating hospital needs of equipment also put-ting
the equipment specifications for tenders.
 General repair on both board and component level.
 To make sure that all work activities and assignments are documented according to ISO require-ments.
 1st call engineer for Laser ophthalmology, laser dermatology, and lab equipment e.g. blood gas ana-lyzer
Rapidlab 348, chemistry analyzers COBAS Integra 400 & 900, HITACHI 911, blood cell coun-ters,
etc…
 System administrator and technical support IT specialist for many software applications, ensuring
proper communication between different applications /databases through HL7 protocol.

4. Page 4 of 5
Computer science as minor academic study
Computer Software:
 AutoCAD 2010
 MATLAB
 Microsoft MS Projects
 HL7 V2
 Mirth Connect
 Oracle database
 Microsoft Office – Developers Level
 Microsoft Access database
 Visual Basic .NET Programming
 Web Developing
IT Skills:
Design and implementation of comprehensive network structures and communication solutions for many
hospitals e.g. SKMC Ajman UAE, RAO RAK UAE, Okhmatdyt Kiev Ukraine. Expert in gathering, analyzing
and defining business and functional requirements including technology solutions for healthcare systems and
networks. That included the LAN cabling structure, IBM Blade Center Deployment, OS Configuration, Data-base
and Application setup including HIS, RIS, LIS, PHIS, PACS and HRMS.
Designed and Implemented the MOH Policies for desktop, Laptop, Thin Client and Servers as per Microsoft
best practices in healthcare environment.
Successfully deployed and implemented the Server Health Checkup and Monitoring application across the
network.
Expertise Highlights
 Technical Infrastructure
 Strategic Technology Planning
 Network & Systems Administration
 Help Desk Operations/Management
 Best Practices & Continuous Improvement (Server/LAN/WAN Optimization)
 Major Software/Systems Implementations
 Systems Security & Disaster Recovery Planning
 IT Costing and Budgeting
 Technical Writing (Manuals/System Specs)
Language Read Write Speak
Arabic Excellent Excellent Fluent
English Excellent Excellent Fluent
German B2 B2 B2
IT & Computer
Skills
Language Skills

5. Page 5 of 5
Additional
Technical Skills
Design of wide variety of electronic boards such as:
 Stepper motor drivers.
 PC AISA Bus interface boards.
 Micro controller based boards.
 Cryoscopic Osmometer main board.
Assembly of IBM compatible PC systems and Computer Networks.
Earlier Software and Hardware accomplished projects:
 PC / Microcontroller Spectrophotometer (2001):
Designing and built a spectrophotometer system that can work either as a stand- alone micro controller
based system or as a PC-based system with remarkable software features.
 Remote Monitoring and Control (2002):
Built a web site that enables the client to control synchronously the position of a web camera placed at the
server side and watch the video streaming.
 Online Theater Ticket Reservation System (2002):
Building the first Egyptian web site that enables clients to browse all local cinemas programs and book their
tickets online. It also enables cinema managers to update their programs whenever they need to. Producers
can also advertise their film productions.
Reference
Dipl. Ing. Adolf Schmiedhofer
Engineering Manager, VAMED Engineering AG.
Phone: +43 1 60127/237