Jun Lin is an experienced electrician and control technician seeking a position in the electrical control industry. He has over 10 years of experience installing, programming, maintaining, and troubleshooting instrumentation, electrical, electronic, and control systems. Lin holds Red Seal certifications as an electrician and instrumentation technician, as well as certificates in PLC programming. He is reliable, hardworking, and a team player.
1. JUN LIN
11 Lancashire Road
Markham ON. L3R 8K9
(416) 936-3888, jun.lin.ca@gmail.com
OBJECTIVE: To apply my skills & experience onto the Electrical Control industry field and in turn
brings success to your organization.
PROFILE:
• Over 10 years working experience as an Electrician & Control Technician
in the industry field
• Efficient in installing, programming, maintaining and troubleshooting the
instrumentation, electrical/electronic systems and control system
• Bachelor degree in Engineering, Inter-Provincial Red Seal 309A Electrician,
Red Seal 447A Instrumentation & Control Technician
• Certified Senior PLC Engineering Technician, Master Electrician
• Reliable, fast learning, hardworking team player
RELATED EXPERIENCE
GENERAL MOTORS OF CANADA, GM Car Assembly Plant Oshawa ( 2004~2013 )
Industry Electrician / Instrumentation & Control Technician / Maintenance Technician
• Installed, configured, calibrated and maintained control, measurement and indicated
instrumentation (pneumatic, hydraulic, analog & digital), and all other related components;
• Installed, setup, programmed and maintained the PLC control logic system( PLC3, PLC5,
SLC500 ,ControlLogic 5000, CCS-2), VFD motor control, HMI, Ethernet, DeviceNet & DH+
system, Robots( ABB series and Fanuc RJ2, RJ3 & R2000 series)and Robot’s components, HVAC,
welding & Nordson sealer control system and equipments ( Robotrion, Square D etc.), and all other
related components;
• Installed, trouble-shoot, repaired and replaced the interior/exterior wiring systems, electrical
equipments, conduits, cables, transformers, switch equipments, the control logic system, Ethernet,
DeviceNet system, Robots, welding & sealer system, conveyor system (include AMS and AGV);
• Installed, setup and maintained electrical/electronic systems, fixtures and supervisory systems,
Auto production assemble lines, control logic systems, communication system, power switches and
bus boxes, power supply equipments, electrical devices and all other related components;
• Consulted diagrams and technical documentation such as schematics, manuals, standards and
codes; maintained backup and revision documentation for control systems and instrumentation;
• Performed all preventative maintenance (PM) procedures by C.M.M.S, according to the established
SOP and PM schedule, coordinating parts and service, as required;
• Prepared/interpreted layouts and electronic circuit diagrams, provided work direction and training
to others, performed a variety of skilled work not requiring the service of other licensed trades;
• Tabulated and analyzed measurements and readings for preventive maintenance to reduce any
cause of possible service interruptions;
• Supported plant operations during overtime and weekend work, recorded main events in PC by
Windows XP/Windows 2000, logbook, ensured adequate follow-ups with fellow employees;
• Positive involved in the Ideals for Excellent program of company；Attended internal and external
courses for new standards and upgraded knowledge on any new technologies and methodologies;
2. JUN LIN 416-936-3888 Page 2
• Supported housekeeping at top level in maintenance cage and throughout the plant, ensured safety
in workplace, order tools, toolboxes, small equipment and supplies through supervisor as required;
MOTHER PARKERS TEA & COFFEE INC. ( 2013~Pre. )
Lead Hand of Maintenance / Industry Electrician / Millwright
• Installs, replace, repair, maintain and troubleshooting various kinds of food processing, high speed
packaging and material handling equipment (from German and Italy) and conveyor lines, heat
exchangers, fans and blowers, various temperature control, switchgears, transformers, regulators,
reactors, VFD motors control, generators, HMI, Fanuc Robots, Nordson system, industrial
hydraulic, pneumatic and electrical control systems and devices ran by PLC control systems (AB,
Siemens, Elau and Omron);
• Conducts preventive maintenance programs, keep maintenance records, instructs apprentices, read
blueprints, schematics and drawings, interpret electrical code specifications, maintain inventory of
store material, knowledge of Electrical Safety Authority requirements and GMP policy;
• Develop and maintain an effective PM program tracking operating failures and planned downtime;
ensure an effective PM system to maintain equipment compliance to SQF, GMPS and quality
requirements;
• Assist the maintenance manager to assign and review work of maintenance mechanics and some
outside contractors; prepares all vacation and weekly shift schedules of maintenance term; perform
variety training for maintenances and workers;
• Continue to develop the relationship between the operators and Maintenance crew, cross training in
maintaining equipment; maintain good employee relations and adherence to company policies and
procedures; track maintenance performance and take action when needed;
• Inspect the workplace of responsibility for safety and GMP violations, perform corrective actions;
coach workers in resolving manufacturing issues related to safety, quality, and productivity losses.
EDUCATION:
Certificate as a Inter-Provincial Standard Construction & Maintenance Electrician (Red Seal) 309A
Ministry of Training, Colleges and Universities, Ontario
Certificate as a Inter-Provincial Standard Instrumentation & Control Technician (Red Seal) 447A
Ministry of Training, Colleges and Universities, Ontario
Certificate as a Master Electrician
Electrical Safety Authority, Ontario
Certificates of GM Canada Technical Training
Allen Bradley Control Logix 5550; Allen Bradley Control CCS2; SLC 5/04 Programming and
Operations; ABB6400S4PC Programming and Operations; Fanuc R2000 Electrical Programming and
Trouble-shooting; Fanuc R2000 Electrical Maintenance; Fanuc RJ2/3 SpotTool Programming and
Operations; GMC Technical Troubleshooting, etc.
Obtained the Certificate of WHMIS, CPR
Certificate as a senior PLC Engineering Technician
RETS (Radio Electronic Television Schools) School, Toronto, Ontario
INTERESTS: Reading, Swimming and Badminton
