1. •Understanding how a materials microstructure
changes as a result of fatigue and high
temperatures is important to designing with new
ultra strong materials. [1]
•This study is on the implementation and
modification of a lamp furnace for in-situ materials
testing.
•Neutron beam is an ideal candidate for observation
of change in micro structure. [2]
• The Installation of lamp furnace on load frame
• Thermal analysis using finite element analysis
• High temperature test on sample specimen
• Redesign of insulation for reduced beam
interference.
• Positioning lamp furnace considerations:
No interference with operation of test stand
Effective heating of test specimen
• Thermal analysis
CAD model of test set up using solidworks
Thermal analysis of model using Ansys
• High temperature test
Record and compare result with model
analysis
• Redesign of furnace insulation
Reduced interference with neutron beam
Easy of fabrication and installation
Test sample with thermal
couple attached
Insulation
Heating Element
Beam Direction
Sample Rotation
Water Cooled Sample Grip
3 axis mounting
bracket
Wire Mesh Thermal Analysis
Original New
Benefits:
• Easier fabrication
• Easier installation
• Increased height for decreased beam interference
• Optimal installation position found
• Thermal analysis and high temperature test
was preformed
• Temperature fluctuations were with in an
acceptable range for in-situ testing
• Comparison showed >1% difference between
center measurements and >2% difference
between side measurements
• Redesign of insulation completed
•Easier fabrication and installation
•Reduced beam interference
• Profiling of furnace interference during neutron
beam test
• Submit beam line time proposal for high
temperature test
• Perform in-situ test
1. M. Yashima, “In situ Observations of Phase Transition Using High-
Temperature Neutron and Synchrotron X-Ray Powder Diffractometry,” J.
Am. Ceram. Soc., vol. 85, no. 12, pp. 2925–2930, 2002.
2. M. A. Krivoglaz and O. A. Glebov, Diffuse Scattering of X-Rays and
Neutrons by Fluctuations, Softcover reprint of the original 1st ed. 1996
edition. Springer, 2011.
The Research Alliance in Math and Science program is sponsored by the Office of Advanced Scientific
Computing Research, U.S. Department of Energy. The work performed at the Oak Ridge National
Laboratory, which is managed by UT-Battelle, LLC under Contract De-AC05-00OR22725. This work
has been authored by a contractor of the U.S. Government, accordingly, the U.S. Government, retains
a nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or
allow others to do so, for U.S. Government purposes.
Research Alliance in Math and Science
SNS Vulcan Beam line Team
Mentor: Ke An
Jorge Cisneros Email: jscisneros@gmail.com
Wayne State University
0
200
400
600
800
1000
1200
0 200 400 600 800 1000 1200
Temperature(oC)
Set Point (oC)
Furnace Measured vs. Predicted Temperature
Measured Center
Predicted Center
Measured Side
Predicted Side